used STEINEL sh

Stamping standard

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Weighing fraes machine STEINEL SH5, table 700 / 200 mm, table lashing adjustment pneumatic

We offer several machine pallets for Steinel and Heller machines!

Multi-spindle drilling machine make STEINEL type BGS 140Machine -No: 9482Technical specifications:Number of spindles max .: 12 pieces:Articulated spindles installed: 3 pieces8 spindle speeds: 355 - 2800 rpm:Motor power: 1.2 kWDimensions L x D x H: 500 x 700 x 1900 mmWeight: 172 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal machining center with 2-fold changing table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Fabr. No. 34 Year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle Drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant device with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 ton. good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 ton. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg; used

Steinel BZ 20, Year of construction 1993, Control Siemens 880 M, travel X/Y/Z 400/300/320 mm , Tool changer 60 times, Mounting SK 40, IKZ 30 bar, 4 compartment pallet, Pallet size 320 x 320 mm, spindle speed up to 7,100 rpm, indirect displacement measuring system,

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: centre height: 280 mm turning diameter over slide rest: 340 mm bed width: 350 mm spindle diameter: 100 mm spindle hollow: 63 mm transmission ratio: 2 spindle turning speed range: 1-2500 U/min quill stroke: 160 mm total power requirement: 15 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 2,75x1,65x1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: centre height: 280 mm turning diameter over slide rest: 340 mm bed width: 350 mm spindle diameter: 100 mm spindle hollow: 63 mm transmission ratio: 2 spindle turning speed range: 1-2500 U/min quill stroke: 160 mm total power requirement: 15 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 2,75x1,65x1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: centre height: 280 mm turning diameter over slide rest: 340 mm bed width: 350 mm spindle diameter: 100 mm spindle hollow: 63 mm transmission ratio: 2 spindle turning speed range: 1-2500 U/min quill stroke: 160 mm total power requirement: 15 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 2,75x1,65x1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: greates pass round over bed: 750 mm swing diameter over bed slide: 670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

useable stroke: 30 mm rivet shank max: max. Ø 6 mm throat: 130 mm spindle turning speed range: 1400 U/min quill stroke: 45 mm table surface area: 284 x 235 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Roll riveting machine with safety device for low-noise rolling riveting of all types of rivet heads. The rivet stopper is mounted at an angle in the roll rivet head on roller bearings so that it can tumble freely regardless of the rotation of the head. Fast and powerful movement of the roller rivet head thanks to a directly pressurized compressed air cylinder. Force requirements can be adjusted steplessly. Manual availbale The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Consisting of polishing stand with brush, polishing stand with sanding plate, double bench grinder from the manufacturer SOLID (type: DS0, speed: 2990 rpm) Total table dimensions: approx. 1000 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 950 x 1,300 mm, weight approx.: 600 kg

: . centre distance: 2000 mm turning diameter: max. 570 mm spindle bore: 70 mm control: 805 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Teach in lathe, Copper must carry chips and coolant

Rated current: 6 A with drill head

Tapping machine on base. -For tapping: M8x1.25 mm. M6x1 mm. M4x0.7 mm. M3x0.5 mm. M2.5x0.45 mm. M2x0.4 mm. -Machine size: approx. 20w x 70d x 60h cm, height adjustable. -Dimensions frame: approx. 80w x 65d x 96h cm.

Description: travel lengthwise 350mm rapid traverse lengthwise feeds 12,5 - 140 mm/min table 785x200mm speeds 35,5 - 1800/min Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 kg

Automatic sheet to sheet Laminator DGM ETH1650  Manufacturer : DGM  Year of Installation : 2014  Year of Manufacturing : 2014  Format : 1650x1450  Description :  High Speed Automatic Sheet to Sheet Carton Laminating Machine  - Maximum paper size : 1650 x 1450 mm  - Minimum paper size : 380 x 380 mm  - Top Sheet : 180-350 gm/m2  - Corrugated Board: E,F,B,C,A & up to 5 layers  - Carton Board: min 250 gm/m2  - Speed : 5000 s/h  - Line speed: 130m/min  - Dimensions: 14.5 x 2.6 x 2.7 m  - Weight: 8.5 ton  - Power Consumption: 15.7 kW

- Hobelbreite 22 - 160 mm - Hobelhöhe 10 - 100 mm - min. Werkstücklänge 100 mm - 4 Spindeln - Spindel FI 40 mm - Drehzahl 7500 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Kettenbreite Vorschub 20 mm - max. Spanabnahme untere Welle 10 mm - Aufgabetischlänge 1200 mm - 1. Welle unten 5,5 kW ,Werkzeug FI 125 - 160 mm - 2. Welle rechte 5,5 kW ,Werkzeug FI 125 - 160 mm - 3. Welle linke 5,5 kW ,Werkzeug FI 125 - 160 mm - 4. Welle oben 7,5 kW ,Werkzeug FI 125 - 160 mm - Motor Vorschub 2,2 kW - Motor Höhenverstellung 0,75 kW - Satz Vorschubwalzen FI 140 x 35 x 50 mm, FI 140 x 35 x 20 mm, FI 140 x 35 x 16 mm - Absaugstutzen 4 x 130 mm - Druckluftanschluss max. 6 bar - pneumatischer Andruck der Vorschubwalzen - Vorschubsystem mit Kardanantrieb - Gleitmittelpumpe - inklusive Hobelköpfe - Abmessungen L= 3150, B=1510, H=1600 mm - Gewicht 3500 kg

For sale we offer used SHOE SORTER from VANDERLANDE. The sorter is after extensive overhaul in 2019 and replacement of elements with new (drive motor, bearing, control cabinet, camera, slots, servo motors, electrical installation). Automatic sorting systems are used for the transport and handling of materials in retail and wholesale as well as for all sales activities including electronic commerce. The advantage of the sorters is short time, maximum efficiency and precision in order processing. technical data: Dimensions of available sorters: Sorters 1 and 2 1.27 m wide The width of the belt is 1.10 m Height 0.63 m Distance from the ground 0.82 m Length 110 m Sorter 3 1.10 m wide Bandwidth 0.95 m Height 0.71 m Distance from the ground 1.10 m Length 33.5 m Sorter 4 1.27 m wide Bandwidth 1.11 m Height 0.63 m Distance from the ground 0.82 m Length 107.5 m S ...

Cutting unit consisting of: 7 rotating blades and 8 fixed counter blades. Incl. hydraulic presser Technical data: Throughput: Depending on the material and hole screen Power consumption: 17 kW Dimensions: (L x W x H) 154 x 115 x 170 cm Hopper: 1,180 x 1,120 mm Weight: approx. 1.200 kg Hole screens: 2 pieces (10 mm and 15 mm) Application for: Materials such as copper, aluminum cable, non-ferrous metals, rubber, plastics, wood, and composites