used SPREMATEC cone

Sprematec baking system BASE CONE 212 / 69 / 16 for roll production - Condition: Demonstration system - Number of baking plates: 69 pieces - Baking plate size: 212 mm - Product size: D= 20 x 48 mm - incl. succession line

Presentation machine Band width: 600 mm

Wire belt with FU, Cabinet Make: Sprematec Length: 1000 mm Width: 600 mm

Condition: presentation machine Size: 120 Liter usable Volume - with control system - with pump to empty out

Condition: presentation machine Size: 160 L usable Volume - with control system - with pump to empty out

slicer for curry sausage bandwidth: 300 mm, cuts for 12 mm construed.

Condition: Presentation machine Size: 120 Liter usable volume

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Lake mixer / Mixer -Manufacturer: Sprematec -Condition: presentation machine / demonstration system -Size: 120 L

L-conveyor belt / conveyor belt / robe / L-band / Transportation belt -Manufacturer: SPREMATEC -Working width: approx. 305 mm -horizontal area: approx. 1.5 m + 45° kinking -rising area: approx. 4.43 m -Adjustment gear -Plastic link conveyor belt with 2" high catch all 300 mm (Intralox/Habasit/Ammeraal)

- Belt widths: 400 mm / 600 mm / or on request - for the wrapping of food - Baking dough is then fried crispy - Demonstration system - (figure similar)

SPREMATEC – Baking system SPM 30 for cast wafer products Condition: Demonstration system Number of baking plates: 30 pieces Baking plate size: length: 390 mm, width: 2 x 55 mm for cast waffle cones other poured waffle products are also possible on request incl. discharge belt and packing tray

SPREMATEC – FLA 36 baking system for flat wafers Condition: Demonstration system Number of baking plates: 36 pieces Baking plate size: 460 x 290 mm

SPREMATEC – Dough mixer 210 L – Semi-automatic Condition: Demonstration system Size: 210 L usable volume with control Pump for emptying

SPREMATEC – dough mixer 210 L – on weighing rods Condition: Demonstration system Size: 210 L usable volume on weighing rods

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

W&P Cone Rounder CCR-59 - 2nd-hand completely overhauled in 2022 - Working range 400 - 1,600 g, Capacity range up to 5,000 pieces per hour new non-stick coating on cones and tracks Infeed at 6 o'clock (can be changed to 3 o'clock), outfeed at 12 o'clock Frequency converter for infinitely variable cone speed Hot and cold air blowing unit Lubrication device with seven spraying nozzles 5 m connection cable and CEE plug Power supply: 2,8 kW Electrical connection: 400V/50Hz/3~

for soft doughs

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

* General * SKU231U212 * LocationBarneveld * MakeGemco * TypeMemcomatio Solids: Double Cone * No.B-85379 * Year of construction1985 * Main Features * MaterialStainless steel * Volume850 Ltr. * Motor3 KW * Specified Features - Tumbler mixer * MaterialStainless steel 1.4306 (304L) * Double cone tumbler mixercheck * Capacity850Ltr. * Diameter1400mm * Length/Depth1500mm * Cylindrical length480mm * Conical length500mm (2x) * InletDia: 460mm * OutletDia: 200mm * With motor3kW, 230/400 Volt, 2870rpm * Information * Mounted on mild steel framecheck * With switchcheck * With switchgearcheck(as is) * Weight1800kg * Floorspace2,7x1,6m * Total height3mTumbler mixersGemcoMixers > Tumbler mixersBrand > Gemco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: AMADA Promecam / Type A / Type R1 Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!