used SOMET sps

Tool Presetting Machine make SOMET type SPS 200 UK 019 200 No: S 4/194 built in 1987Outside dimensions approx: 660 x 730 x 1600 mmWith- Profile projectorused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool presetter SOMET type SPS 500 U Masch. No. S1-020 Year of construction 1987 Table surface 545 x 1000 mm Travel X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge portal 250 mm - portal longitudinal guide right un left on the table - adjustment via very fine threaded spindles with handwheel - Quick adjustment via electric release - Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100 - 2 pieces clamping devices for tool measurement - on substructure with shelf and drawer Space requirement L x W x H: 1100 x 700 x 1650 Weight 560 kg good condition; used

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

working area: 50 - 75 mm working area: 75 - 100 mm working area: 200 - 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens PLC SCALANCE X212-2 6GK5212-2BB00-2AA3 RA2287 Manufacturer: Siemens Model: 6GK5212-2BB00-2AA3 Condition: Used Transmission rate: 10 Mbit/s, 100 Mbit/s Interfaces Number of electrical connections for network components or end devices: 12 Number of 10/100 Mbit/s RJ45 ports / integrated with retaining collar: 12 Number of 100 Mbit/s ST(BFOC) ports for multimode: 2 Operating voltage / of the signaling contacts at DC / nominal value: 24 V Operating current / of the signaling contacts at DC / maximum: 0.1 A Maximum current drawn: 0.33 A Design of the electrical connection for power supply: 4-pole terminal block Type of electrical connection for signaling contact: 2-pole terminal block Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features:

Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up

Type: SPS 2" No.: 32990992 Stöber gear N1-n2 = 120-602 min-1 Type: R47-1029-220-4 No.: 1012558 Engine power: 2,2 kW Dimensions: LWH = 1200 x 400 x 800 mm moveable frame Stainless steel cover

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport

Horizontal surface grinding machines ELB - grind optimally 6375 PLC Second-hand machine Second-hand machine excellent condition, hardly used Second-hand machine Grinding length: 600 mm Grinding width: 350 mm Workpiece height: 375 mm Table clamping surface: 600 x 375 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4,5 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 18kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m 6 months warranty Paper machine Magnetic Chuck 600 x 350 Automatic dressing device with compensation 1 flange Items put up Installation / commissioning / transport

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Maso pump Manufacturer: maso Process-Pumpen Type: PLC-2.5" N°: 74741299 speed-controlled good condition LWH: 1350 x 360 x 520 mm

Process pump Manufacturer: Maso Type: Plc-2" N°: 111050205 with CE mark very good condition Engine: SEW-EURODRIVE Power: 1.5 kW IP66 LWH: 950 x 220 x 340 mm

Process pump Manufacturer: Maso Sundyne Corporation Type: Plc-4" N°: 89700602 very good condition with lid LWH: 1500 x 400 x 560 mm

Processing pump Manufacturer: Maso Sine Pump Type: SPS-4" No°: 31260692 good condition Power: 11 kW Speed: 1450 rpm LWH: 1500 x 700 x 700 mm

Processing pump Manufacture: Maso Sundyne Corp. Type: PLC-2.5" Item #: 101920104 Power: 1.1 kW Speed: 1410 rpm LWH: 1100 x 300 x 430 mm

Processing pump Type: PLC-2.5" Item #: 105670604 Manufacturer: Maso Sundyne Corp. very good condition LWH: 1100 x 400 x 550 mm

Processing pump Manufacturer: Maso Sine Pump Type: SPS-3" No°: 61210497 speed-controlled good condition with cover LWH: 1600 x 700 x 520 mm

Tankresse, Diemme M.A.S. Type: PLC 150 Power: 15,000 liters Year of construction: 2007 Dimensions: approx. LxWxH: 6500x2400x3100 mm

grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 6 - 28 mm wall strength: 2 mm bending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mm bending angle max.: 190 ° arbor length: 3000 mm operating pressure: 180 bar hydraulic motor: 4 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 3,8 x 1,1 x 1,3 m Condition: ready for operation: Electric 400 Volt: Bending segments: diverse Zoll Bending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 m Double Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraul ...

injection molding machine:800 kN demoulding stroke:120 mm max. manipulateable mass:1.500 g X-axis:120 mm Y-axis:500 mm :Schwenkachse mm Payment terms: 100% prior to delivery

Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.

Electro-hydraulic. Mandrel bending machine make TRANSFLUID type DB 628 ST SPSMasch. -No: 7507/2/2000 year 2000Technical specifications:Pipe diameter 6 - 30 mmMax. Wall thickness 2 mmSolid material up to 20 mmBending radius min. 10 mmBending angle up to 190 °Bending time at 90 ° 3.0 sec.Mandrel length / pipe pushing length 3000 mmRadius range max. 85 mmBending height 1050 mmfreestanding bending head 850 mm lg.Head for clear width between 2 bends of 300 mm distanceNominal pressure 250 barOperating pressure 200 barDrive power 2.2 kWDimensions L x W x H 3500 x 900 x 1300 mmWeight approx 800 kgWith- PLC control, bending process semi-automatic or manually selectable- Storage of 500 tubes with 20 different positions each- hydraulic drive, right-bending- Triggering optionally via foot or hand switch- Bending direction clockwise, hollow shaft for small radii- Tool reset by hand, hydraulic count ...