used SCHUTTE wu

Schutte AF 42-8 Multispindle Lathe • 8 spindle mechanical lathe • CNC controlled and chip conveyor at stations 6 and 7 • Automatic shaft loading • It is in working condition

Schutte 26 SF-DNT Multispindle Lathe (6 Spindles) It is in working condition

Used Schutte SF-51 Multispindle automatic lathe Machine in working condition for sale due to business closure. negotiable price

Used Schutte Se 16 Multispindle automatic lathe model Se 16 six spindles, year 1975 maximum diameter with counter-pliers 18 mm, with the automatic loader it becomes 22 mm. electrical panel redone The machine is already set up for the loader, but it also has the tube and the stand

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

It has been used in a corporate company before. It was last installed and operated 1.5 years ago. It will be sold directly from the owner.

Cooling equipment - weight: 200kg L 1,700 x W 800 x H 900 cm, High: 2.100 mm, Long: 2.400 mm, Width: 2.400 mm, Weight: 2,500 Kg., Voltage: 380 V, Total power: 4 Kw, Wheel speed: 2,250 / 6,000 rpm, Grinding length: 400 mm, Ø max workpiece: 320 mm, Transversal stroke: 260, Longitudinal stroke: 400 mm, Distance between points: 700 mm, Race car rolling (x axis): 400 mm, Vertical travel of trolley wheel: 280 mm, Specification: Universal

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately *. We ship worldwide we deliver  ...

Operational voltage: 380V, nominal current: 20A.

Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electricity and heat generators from 1997, complete 1 available 52 KWel x 1,525 rpm, 400 V/50 Hz with AC asynchronous generator Manufacturer: Deutz Model No.: WUDF225M Type: Gas-fired CHP Serial Number: 07908941 Power [kW]: 52 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 89 Speed [1/min]: 1525 Year of construction: 1997 Weight [kg]: 2.250 Dimensions LxWxH [cm]: 220x95x215

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Kunzmann Universal Milling and Drilling Machine WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Wuerfeltisch 550 mm

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good

1 Wulf steam boiler system Manufacture No. 3813 Year of construction 1993 Power: 8 to Damph per hour Up to 13 bar vapour pressure with laterally mounted steam pipe register with Weißhaupt Combi burner for gas and light oil with lying boiler feed water tank Capacity 8,000 l with all-round piping and Structural steelwork with steel fireplace with exhaust gas heat recovery register system with Wulf Elektro control cabinet 1 Wulf steam boiler system Manufacturing No. 3813 Year of construction 1993 Output: 8 to steam per hour Up to 13 bar steam pressure with laterally attached steam pipe register with Weißhaupt Combi burner for gas and light oil with horizontal boiler feed water tank Contents 8,000 l with all-round piping and steel construction with steel chimney with exhaust heat recovery register system with Wulf electrical control cabinet

Bar loading magazine for multi spindle automatic lathe Schütte SG18, factory new Special offer! Test phase on your machine in D/A/CH/BeNeLux possible! Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Schütte SG18 Type: DBM 21/36 Design: lateral loading magazine / integral loading magazine Yob: 2021 length of bars: 33000mm Total length: approx. 3680mm Bar stock: approx. 680mm Optimized loading time (modification to Schütte may also be required) 12-14 seconds (total loading time). There are several pieces brand new and immediately available. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features * SCHÜTTE CN ...

Article: Brushless Servomotor Manufacturer: Bosch Type: SD-B5.380.020-00.000 e.g. to use as feed motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: three-phase current motor Manufacturer: Antriebstechnik Bauknecht Type: RFV 22/4-75P e.g. to use as spindle motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features * SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS ...

Article: Brushless Servomotor Manufacturer: Bosch Type: SD-B5.380.020-00.000 e.g. to use as feed motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

for Schütte SF 32, Country of origin: Italy, Number of spindles: 6

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...