used SCHUETTE sf

Standard contactor control, mechanical transmission, hydraulics integrated in the machine incl. screw chip conveyor System has a bar guide and a guide stand on a separate pallet The system is loaded onto a truck with a special forklift or crane on a special date

Rated current: 65 A, Wiring diagram: 49c4269 incl. - Tapping gears - Screw shavings conveyor - Rod guide and stand

with threading gear BD100 Tool Clamping Fixtures 3* Included Inclusive - Tapping spindle (see photos) - Pick-up device Machine was designed as a spindle stop machine- Machine has a bar guide and a bar stand on pallet Arrange special loading with forklift or crane on truck at a separate loading date.

number of spindles:6 spindle passage:67 mm cam controlled multi spindle automatic lathe six main spindles D=67mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:81 mm cam controlled multi spindle automatic lathe six main spindles D=81mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:100 mm cam controlled multi spindle automatic lathe six main spindles D=100mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Article: cam-controlled multi-spindle automatic lathe with CNC-pickup Manufacturer: Schütte Type: SF51 Yob: 1988 six main spindles for bars up to D=51mm CNC-pickup in position 6 with rear CNC-machining; electronic cam control Balluff; independent feed position 4; chip conveyor: magnetic belt; oil/stee-running; additional coolant pump with double filter (magnetic cartridge filter). The machine tools shown and not listed are not part of the scope of delivery. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

- 6 spindles - Max. bar clearance: 63.0 mm - Rod guide and stand including many accessories (see photos)

number of spindles:8 spindle passage:130 mm Cam controlled multi spindle automatic lathe, used 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo Irrtum und Zwischenverkauf vorbehalten Visiting under production condition possible Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: S51 PC Yob: 2008 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm hirth-coupled spindle drum, Control: Software SICS 2000 / Windows 2000 / Beckhoff Twincat Position I: cross slide X-I; longitudinal slide Z-I Position II: compound slide cross XZ-II; longitudinal slide Z-II Position III: compound slide cross XZ-III; longitudinal slide Z-III Position IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IV Position V: cross slide X-V; compound slide longitudinal ZX-V Position VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VI Coolant tank with hinged belt chip conveyor; Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar; Workpiece collecting device with belt conveyor (low ...

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

Variable speed drive. Volume flow air end replaced 1 x 10.2 40.5 m3/min. Motor renewed at 65000 h.

Rotary screw air compressor frequency controlled Kaeser DSDX 302 SFC 160 kW, 12 bar, 5.60-26.70 m3/min.

- Arbeitsbreite 1300 mm - min. Werkstücklänge 465 mm - min./max. Durchlasshöhe 3-100 mm - Gesamtleistung 71.8 kw - Vorschubgeschwindigkeit stufenlos 4-28 m/min - Motorleistung erstes Schleifaggragat 30 kw - Motorleistung zweites Schleifaggragat 22 kw - Motorleistung drittes Schleifaggragat 15 kw - Motor Vorschub 3.7 kw - Motor Höhenverstellung 0.55 kw - Motor Entstaubungsbürste 0.55 kw - Härte der ersten Schleifwalze 80 sh - Härte der zweiten Schleifwalze 50 sh - Härte der dritten Schleifwalze Schleifschuh - Durchmesser der ersten Schleifwalze FI 255 mm - Durchmesser der zweiten Schleifwalze FI255 mm - Durchmesser der dritten Schleifwalze Schleifschuh - Schleifbandgeschwindigkeit erstes Schleifband 21 m/s - Schleifbandgeschwindigkeit zweites Schleifband 14.5 m/s - Schleifbandgeschwindigkeit drittes Schleifband 11 m/s - Schleifbandabmessung 1320 * 2000 mm - Druckluftanschluss 6 ba ...

Genuine Pump Settima Meccanica GR48 SFO125 LHA IMF QRP for Pielstick 16 PC2-2V400 New and unused (Condition - See photos, unused, from a canceled order, stored since 2012).

75.0 kW, max. 8.50 bar, 12.28 m3/min. With built-in frequency inverter. Volume flow 2.89 - 12.28 m3 rpm.

75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.

Mill 6-8 HP feed: Type: ETZ construction form: B3-R type: 27/4-2

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Compressed air screw compressor Kaeser DSD 201 SFC 110 kW, 10 bar, 17.60 m3/min. Frequency controlled, volume flow 3.99 - 17.60 m3/min. screw element new in 2010 and has 24000 hours