used REM sc

CNC VTL ,2 heads ,2 disc magazines REM SCR 50 CNC 2S

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

faceplate diameter: 3000 mm swing diameter: 3500 mm turning height: 3200 mm Control: Fanuc type: Series 320i Model A slide adjustment: 1750 mm ram head dimension: 300x300 mm x-axis: 2700 mm Table load: 30000 kg main drive motor: 100 kW Tool changer: 16 chip conveyor: total power requirement: kW weight of the machine ca.: 89 t dimensions of the machine ca.: 8,5x6x8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main data Direct main drive -maximum diameter to be processed mm. 2630 -plate diameter mm. 2500 -plat speed rpm. 0.1-60 -vertical stroke of the left HEAD Z1 mm 1,100 -vertical stroke of the right HEAD turret Z2 mm 570 -working speed X1-sled left mm./min. 1-6000 - working feed rate X2-right sledge mm./min. 1-6000 - working feedrate Z1 - left slide mm./min. 1-6000 - working feed speed Z2-right slide mm./min. 1-6000 - fast forward speed - X1, X2, Z1 and Z2 mm./min. 8,000 - traverse travel speed mm / min 400 -main drive motor - turning Fanuc 100 kW power Nominal speed rpm 4000 - axle drive motors -Fanuc: Nominal torque Nm 22 Nominal speed rpm. 4000 Bil0rcq8 CNC FANUC 18 itB 4.PRECISION The positioning accuracy is: Positioning accuracy -axis X1,2 and Z1,2 mm 0,040 / 1000 Positioning repeatability -axis X1.2 and Z1.2 mm 0.025

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 kW CROSS RAIL: Cross rail vertical travel: 2500 mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 250 x 250 mm Travel on Z axis: 1600 Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM WEIGHT OF MACHINE TOOL: 180000 kg OVERALL DIMENSION OF MACHINE TOOL: – Length x Width x Height: 13000 x 16000 x 10500 mm

Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Motor power: 0.75-0.86kW.

Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double  ...

REM SC 53 Vertical Turning Lathe with Fanuc CNC Control. Technical Data: - Double Column / Double Heads lathe - Max. swing diameter: 5300mm - Max. turning height: 2270mm - Table diameter: 4700 mm - Load capacity: 25000 kg

REM Foundry is built on a 10.000 sqm surface and a further 7.000 sqm added in 2010. The Foundry was designed to manufacture castings made to customer specifications. Here were casted parts ranging from 1 tone up to 50+ tones, for industries like: wind mills, heavy machine tools, mining, energetic etc. At full capacity, the foundry is able to produce over 1200 tones of castings per month. All the machines in the Foundry come from top suppliers such as Inductotherm Europe and IMF Italy, are enviroment friendly and respect all the EU regulations. - medium frequency induction furnace: maximum capacity - 28t - medium frequency induction furnace: maximum capacity - 23t - conveyor carrier for cores - vibrating table for cores - silos with a capacity of 550t - continuous mixer for moulds with maximum capacity of 60t/h - continuous mixer for cores with maximum capacity of 10t/h - sh ...

3 m VTL 33 CNC 2 heads and magazines - REM SC 33 CNC 2MS Technical data: 1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2000 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws 4. Cross Rail - Vertical Travel 2000 mm - Cross Rail elevating motor 7.5 KW AC 5. Feeds - Feed ranges 0.1 – 5 mm/rev - Rapid traverse feed 8000 mm/min 6. Overall Sizes Miwie7iv - Dimensions (approx.) L x W x H 6600 x 5.300 x 5.400 mm - Weight (approximate) 60 tons GEOMETRICAL TESTS (ISO 3655, ISO 230 ...

For sale REM Vertical Turning Lathe SC 43/44 with DRO. Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Bqyuqbw8uq Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons DRO Control

CNC Vertical Lathe REM SC 27-CNC-2S with 2 heads for sale in our stock. Technical Data: Faceplate diameter: 2500mm Max. turning diameter: 2650mm Max. height of workpiece: 1900mm CNC Control Max. workpiece weight: 15 tons

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50

TOTAL LENGTH: 53798 MM, WIDTH: 10500 MM, HEIGHT: 10830 MM; CASSETTE INNER DIM.: 7500x1000x265 MM - L x W x H MAX. PROFILE LENGTH: 7500 MM, NO. OF CASSETTE PLACES: 294, DRVING SPEED: 100 M/MIN. LIFTING SPEED: 60 M/MIN.,

Used ball mill made by turkish company Remas. Capacity 34,000 liters. Mill inside the rubber, silicon spheres, 90kW engine. 10.68 mill Oroty rev. / Min. Dimensions: 3120mm diameter. length of 5380mm. Dost. 7 pcs.

Fireproof filing cabinet Manufacturer: Remington Rand Kardex For the storage of important documents and files. In good condition!

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

Remanufactured Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

Thread cutting machine make REMS type Tornado 2000Fabr. -No: 34022697for the efficient production of pipe and bolt threads, thread cutting, cutting off, deburring, nipple cutting in the workshop and on the construction siteTechnical specifications:Pipe thread size: 3/8 - 2 Speed: 60 rpm.Power connection: 220 V, 50 HzDrive power: 1200 WExternal dimensions L x W x H (without basement): 730 x 435 x 280 mmWeight of the machine without accessories: 31 kgWith- foot switch- thread cutting head- pipe cutter- pipe support- deburrerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price

Double grinding bracket, knife grinding machine Turning one side quickly, the other side running slowly in the water, e.g. for grinding knives Grinding wheel diameter approx. 300mm Weight approx. 250kg Ready to demonstrate under electricity. Special price