used RASTER hr

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic punching machine Brand: Zeulenroda Raster Type: PDA 100 Year of construction: 1995 Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table Ram: 387 mm min. ram stroke: 6 mm ram stroke: 82 mm Ram position: 100 mm Ram surface: 900 x 500 mm Table surface: 1200 x 710 mm Diarrhoea opening: 120 x 400 mm Roller feed WE 16 Feed length: 6500 mm Max bandwidth: 160 mm Material thickness: 0 – 3 mm Cross section for steel: 300 mm² Feed length: 0.1 mm Roller diameter: 63 mm Belt speed: 40 m/min Dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine is in our warehouse. Viewing under power possible at any time. Repair/overhaul of th ...

Electric tool changer RASTER Premat EWD20

Motorized reel make RASTER type 4 VAR/KMachine -No: 5612/5 built in 1985Technical specifications:Load capacity: 300 kgBelt width max.: 200 mmCoil diameter: 800mmApprox. weight: 320 kgDimensions approx.: 1020 x 1000 x 1460 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350*100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loadin ...

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years

Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table-to-ram: 387 mm min. plunger stroke: 6 mm max. ram stroke: 82 mm Plunger adjustment: 100 mm Plunger area: 900 x 500 mm Table surface: 1200 x 710 mm Drop opening: 120 x 400 mm Roll feed WE 16: Feed length: 6500 mm Belt width max.: 160 mm Material thickness: 0 – 3 mm Cross-section for steel: 300 mm² Roll diameter: 63 mm Belt speed: 40 m/min Machine dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine can be demonstrated under power.

Description: Fabrication number ,293-076 Hydraulic pressure 320 bar 400 V, ,50 Hz Connected load 25 kW Table height above floor 900 mm Max. pressing force: 250 to, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,700 x 2,800 mm, weight approx.: 25,000 kg, table surface area l x w : 1600x1320 mm, stroke: 500 mm

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 350 mm   table surface (front-back): 330 mm SLIDE (MECHAN. PRESS)   stroke rate (min.): 250 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3800 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to SLIDE (MECHAN. PRESS)   stroke rate (min.): 200 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Capacity: 100 ton Ram stroke: 6 - 82 mm Slide adjustment: 100 mm Table surface area : 1.200 x 710 mm Slide area: 900 x 500 mm Number of strokes: 50 / 200 s.p.m. Required power: 18,5 kW Dimensions L x W x H: 2700 x 2400 x 3500 mm Weight of machine approx.: 13,5 ton

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Hydraulic tool sampling press and small batch press, Nominal force : 400to, Stroke: 600mm , Table surface/ ram surface: 2500 x 1500mm 4200 operating hours, weight: 32to. To be visited under power.

Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally

Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally

No.: 3164 Year of construction: 2001 Type of current. 400V vacuum pump, double jacket Electric heating adjustable Homogenizer adjustable Schauglass, perfume funnel in Rezleitung and cover etc. Mobile frame, control cabinet Dimensions: LWH = 800x1000x1650mm

Capacity: up to 30.000 cans or bottles/h, Product : beer and soft drinks

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

production capacity up to 5.000 bottles/cans/h 0,5 L; submersible-shower type automatic; alarm system; for glass bottles, tins and cans; equipped with Italian and German component parts; made from stainless steel;

Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg