used PROMINENT bah

New dosing pump from Prominent

Dosing unit with 6 prominent pumps (used)

v.v. dosing module

Manufacturer: ProMinent. Type: Bello Zon CDLb. Year of Manufacturing: 2020. Preparation capacity : 0 – 120 G/H. Flow rate: 600 m 3 /h. Power supply: 100 - 230 V, 50/60 Hz.

Output chlorine dioxide: 7g/h, connected load: 60W.

Suction air boiler with diaphragm valve PROMINENT capacity: approx. 2.5 l connection: DN15, DN10 Diaphragm valve: GEMÜ 607 10E 13A0 S Material: PVC / Viton used, tested ! Dimensions ( suction air chamber only ): 465 x 126 x 126 mm Dimensions ( with valve ): 540 x 140 x 126 mm

Suction air boiler PROMINENT Part No.: 243591 Content: 0,,5 l System pressure: max. 4 / 2.5 / 1.0 bar Max. permissible vacuum: 300 mbar absolute at temperature: 0 - 20 / 40 / 60 °C connection: DN15, DN10 Material: PVC / Viton used, tested ! Dimensions: 310 x 73 x 73 mm

Pressure Retention Valve PROMINENT DHV RM 0,5-10 b DN10 PC1 ( DHVRM0,5-10bDN10PC1 ) Part No.: 1000037 Pressure range: 0.5 - 10 bar Connection: G 3/4 ( inch ), DN10 Material: PVC-U / FPM / PTFE as good as new ! Dimensions: 140 x 130 x 90 mm

Pressure retaining valve PROMINENT DHV RM 0.5-10 b DN20 PC1 ( DHVRM0.5-10bDN20PC1 ) Part No.: 1025696 Pressure range: 0.5 - 10 bar connection: G 1 1/4 ( inch ), DN20 Material: PVC-U / EPDM / PTFE as good as new ! Dimensions: 152 x 112 x 240 mm

Pressure retaining valve PROMINENT DHV RM 0,5-10 b DN32 PC1 ( DHVRM0,5-10bDN32PC1 ) Part No.: 1000051 Pressure range: 0.5 - 10 bar connection: G 2 ( inch ), DN32 Material: PVC-U / EPDM / PTFE new ! Dimensions: 208 x 154 x 320 mm

Foot valve PROMINENT 1029475 DN40 G 2 1/4 ( inches ) Material: PP body, FKM gaskets, glass strainer and check ball New ! Dimensions: 155 x 104 x 180 mm

Pressure Retention Valve PROMINENT DHV-S-DK 1-10b 6-12 PC ( DHV-S-DK1-10b6-12PC ) Part No.: 302321.5 Pressure range: 1.0 - 10 bar Connection: 6 - 12 mm / M20 x 1.5 Material: PVC used, tested ! Dimensions: 95 x 48 x 123 mm

Dosing monitoring PROMINENT Flow Control 2 Part No.: 1009338 Operating pressure: max. 16 bar Connection: M20 x 1.5 Switching capacity: max. 10 W Switching voltage: max. 200 V DC Switching current: max. 0.5 A approx. 0.8 m Connection cable Material: PVDF / FPM-B used, tested ! Dimensions ( without cable ): 170 x 45 x 57 mm

Dosing monitoring PROMINENT Flow Control Part No.: 792077.0 Operating pressure: max.16 bar connection: 6 - 12 mm, M20 x 1.5 / G 3/4 ( inch ) approx. 0.75 m Connection cable Material: PP / EPDM used, tested ! dimensions ( without cable ): 120 x 95 x 65 mm

Pressure Maintenance Valve PROMINENT DHV RM 0.5-10 b DN10 PC1 ( DHVRM0.5-10bDN10PC1 ) P/T No.: 1025694 Pressure Range: 0.5 - 10 bar Connection: G 3/4 ( inch ), DN10 Material: PVC-U / EPDM / PTFE as good as new ! Dimensions: 140 x 130 x 90 mm

Die Anlage dosiert ClO2 in Wasser. Dieses kann dann zB in einem Flaschenrinser verwendet werden. More then 300 machines new and second hand on our seema .de

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product shelf lif ...

Suction air chamber with diaphragm valve PROMINENT Part no.: 243593.1 Content: 2.5 l System pressure: max. 4 / 2.5 / 1.0 bar Max. permissible vacuum: 300 mbar absolute at temperature: 0 - 20 / 40 / 60 °C Connection: DN25, DN10 Diaphragm valve: GEMÜ 607 10E 13A0 S Material: PVC / Viton used, tested ! Dimensions ( suction air chamber only ): 445 x 126 x 126 mm Dimensions ( with valve ): 525 x 140 x 126 mm

Wheel bearing dimensions 34x66x37

Checkwaage 3 lanes for thermoforming machines or similar In case of incorrect weights, pack ejection

Control system repair is required.

Semi-automatic bending, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of construction 09/2004 - for simultaneous bending of two pipe sections made of steel up to 12 mm bending angle max. 90 pipe diameter max. 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox series 4000/5000 - Control SIEMENS S7-200 with TD200 display - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Required space L x W x H 1000 x 1000 x 1500 mm Weight 390 kg Good condition; used

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mm turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm control:Siemens/Fanuc/Fagor center height over bed:475|575|675 mm bed width:990 mm spindle bore:153/230/305/405 mm spindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mm tailstock quill diameter:165|200 mm tailstock quill adjustment:250 mm taper in tailstock:6 MK tailstock movement:über Motor travel -x axis:370 | 480 mm travel - z:= Spitzenweite mm servo motor X-axis:3 | 4 kw servo motor Z-axis:4 | 7 kw rapid power traverse in X-and Z direction:5/4 m/min hydraulic motor:2,2 (2,9 opt.) kW coolant pump drive:3 (15 opt.) | 15 bar weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/2 ...

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mm turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm control:Siemens/Fanuc/Fagor center height over bed:705|805|905 mm width of cross cariage:600 mm bed width:1370 mm spindle bore:200 mm spindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mm tailstock quill diameter:300 mm tailstock quill adjustment:250 mm taper in tailstock:7 MK tailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mm travel - z:= Spitzenweite mm servo motor X-axis:4 kw servo motor Z-axis:7 kw rapid power traverse in X-and Z direction:5 m/min hydraulic motor:1,4 (ab 9m: 3,6) kW coolant pump drive:15 bar weight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20 ...

Code 6398 Umschreibung CNC Bahngesteuerte Drei-Koordinaten Messmaschine Fabrikat DEA Typ IOTA 1102 Maschine Nummer 514 Baujahr 1989 Steuerung DEA CU / 01 Tischabmessung L x H x B 1800 x 1000 x 700 mm Längs X = 915 mm Quer Y = 610 mm Vertikal Z = 610 mm Nutzbare Messvolumen 0.34 m3 Gewicht 2050 kg Bemerkungen Maschine hat KEINE Messkopf ( wie Renishaw ) Maschine ist ohne Computer