We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
x-travel: 2500 mm y-travel: 800 mm z-travel: 800 mm control: Heidenhain TNC 426 table weight: 3500 Kg table-size: 2500 x 700 mm number of spindle speeds: 50-4000 U/min/rpm Power: 22 KW taper ISO: 50 weight of the machine ca.: 10.500 kg dimensions of the machine ca.: 6605x3315x2730 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working hours 13560 hours Control unit Heidenhain TNC 426 X-Axis travel 2000 mm Y-Axis travel 800 mm Z-Axis travel 800 mm Table length 2000 mm Table width 700 mm Table load 3500 kg Spindle speed 2500 rpm Spindle taper ISO 50 Motor power 15 kW Rapid feedrate 10000 mm/min Dimensions L 5200 x W 3127 x H 2450 mm Weight 10000 kg
used
NICOLAS CORREA MODEL A-10 MILLING MACHINE WITH HEIDENHAIM 415 CONTROL, TRAVEL 700X800X1300, MACHINE WORKING AND OPERATING.
used
Manufacturer NICOLAS CORREA Model FP 40/40 Year 1997 CNC HEIDENHAIN TNC 426M Table Surface 4.000 x 1.250 mm T slots 8 x 22 mm. Distance between T slots 150 mm. Max weight allowed on table 10.000 kg. Longitudinal Traverse (X Axis) 3.500 mm Cross Traverse (Y Axis) 2.500 mm Vertical Traverse (Z axis) 1.000 mm Distance Between Columns 2.300 mm Rapid Feed (X Axis) 15.000 mm/min Rapid Feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 5.000 mm/min Taper ISO-50 Direct Output Head Speed 5.000 r.p.m. Speed Head 45º 3.000 r.p.m. Main Engine Power 22 kW Speed Ranges 2 Manual Support Hidden at the Right Side for Head 45º INCLUDED Chip conveyor INCLUDED Portable Handwheel INCLUDED Total power 37 kW Machine Weight 23.700 kg
used
NICOLAS CORREA FP-50/60 bridge milling machine used Table dimensions: 6000 x 2000 mm Max weight on table: 30,000 kgs X axis travel: 6,000 mm Y Axis Travel: 3,250 mm Z Axis Travel: 1,000 mm Distance between columns: 2,700 mm Head model: Automatic 2,5º-2,5º Cone: ISO-50 Spindle speed: 3,000 r.p.m. Spindle power: 37 kw Work feeds: 2-7,000 mm / min Rapid feeds: 7,200-12,000 mm / min Machine weight: 61,500 kgs Machine dimensions: 15765x5225x4870 mm Equipped with: Control: SELCA 3045 (Optional HEIDENHAIN 640) ATC tool magazine: 30 tools Internal cooling: High pressure pump - 25 bars Suction system: Yes Perimeter fairing: Yes
used
Manufacturer NICOLÁS CORREA Model FP50/80 New in Year 2010 CNC HEIDENHAIN iTNC-530 5 ejes Table Surface 8.500 x 2.500 mm Max weight allowed on table 35.000 kg. Travels (X/Y/Z) 8.000/3.800/1.250 mm Distance between columns 3.100 mm Max distance table to under bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid feed (X Axis) 10.000 mm/min Rapid feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED Number of continuous axis 2 B-Axis head swivel ± 190º C Axis head rotation ± 360º Spindle taper ISO 50 Spindle speed 4.000 r.p.m. Spindle motor 37 Kw Spindle Torque 718 Nm Speed Range 2 Automatic tool changer INCLUDED ATC positions 30 Portable Handwheel INCLUDED Thermal growth compensation system INCLUDED Machine dimensions 19.370 x 5.850 x 5.970 mm. Machine Weight 93.000 g.
used
CNC Vertical Machining Center Gantry type Table size 5000 x 2000 mm. Travel X-axis 5000 mm. Y-axis 3100 mm. Z-axis 1200 mm. Number of tool places 24 pos. Maximum speed of the working spindle 18,000 min. Tool holder HSK 63. CNC Control Heidenhain TNC 530 If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.
used
Table Surface 3.000 X 1.250 mm Longitudinal Traverse (X Axis) 2.500 mm Cross Traverse (Y Axis) 2.500 mm Vertical Traverse (Z Axis) 1.000 mm Distance Between Columns 2.000 mm. Rapid Traverse (X Axis ) 15 m/min. Rapid Traverse (Y ,Z Axis) 12 m/min. Max. Working Feed 5 m/min. Head Type ORTOGONAL UDG-40 Orthogonal Milling Head indexing every C Axis Indexing 2.5º B Axis Indexing 2.5º Taper ISO-50 / DIN 69871 A Spindle Speed 50- 2.000 r.p.m. Range Speeds 2 Ranges ATC INCLUDED Nº Positions ATC 10 TOOLS Coolant Through Tools 15 BAR INCLUDED Spindle Motor 30 KW. Total Power Requirement 44 kW Year 1997 CNC Heidenhain TNC 426 Carrying Load Table 10.000 Kg. Machine Weight 24.000 Kg. Portable Handwheel HEIDENHAIN HR 410
used
x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: FIDIA C20 table-size: 5000x2000 mm T-slots: 11 T-slot - width: 22 mm table weight: 30000 Kg distance between columns: 2800 mm feed:: x-20000 mm/min feed: y,z-30000 mm/min spindle rate: 6000 rpm : 32 kW taper ISO: ISO 50 Tools changer: 30 fach/tools internal coolant system feed: 20 bar handwheel: weight of the machine ca.: 65 t dimensions of the machine ca.: 15.100x6.200x6.250 mm -Automatic head UAD II -Tool clamping Hydraulic -Head 2 – Vertical mandril INCLUDED -2 longitudinal chip conveyors -1 cross chip conveyor -Laser tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bed milling machine Manufacturer Nicolas Correa Year of construction 2003 Control Heidenhain TNC 426 Clamping surface 2000 x 700mm table load 3.500kg Travel X/Y/Z 2000/800/800mm Tool holder SK50 max speed 4,000 rpm Machine weight 9.000kg Machine is in a used good condition
used
Table: 2500x700 mm Maximum weight on table: 4000 Kgs X-axis traverse: 2500 mm Y-axis traverse: 800 mm Z-axis traverse: 800 mm Milling head model: U22 manual Spindle taper: ISO 50 Speed range: 4000 r.p.m. Clamping: hydraulic Power: 22 kw Feedrate: 5-5000 mm/min Rapid traverses: 12000 mm/min Approx machine weight: 9500 kgs Machine dimensions: 6400x3345x2800 mm Year: 1998 Equipped with: Control: SELCA 3045 Tool Changer: 30 tools Internal and external cooling: Yes
used
x-travel:2000 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:5265 x 3250 x 2730 m weight of the machine ca.:9 t CNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ...
used
x-travel:2500 mm y-travel:800 mm z-travel:800 mm table-size:2.500 x 700 mm workpiece weight:4000 kg drive capacity - spindle motor:22 kW spindle cone:50 ISO spindle turning speed range:20 - 3000 U/min dimensions of the machine ca.: 7800 x 3315 x 2730 m weight of the machine ca.:11 t CNC controller: Heidenhain TNC 426 :Auto-indexing UDG (2.5º) :HR-410 used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and ...
used
Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 426 MACH - ID 6109 Make: Nicolas Correa Type :L30-43 Control :HeidenHain TNC 426 YOP :1997 X-Axis 4.300 mm Y-Axis 1.200 mm Z-Axis 1.500 mm Table Length 6.000 mm Table Width 1.000 mm Table load 10,000 kg Power on spindle 25 kW Spindle speeds 3000 Rpm Spindle Taper 50 ISO/Bt/Mk Feed rate X-Axis 15,000 mm Feed rate Y-Axis 15,000 mm Feed rate Z ...
used
Table length: 6000 mm Table width: 1050 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 2000 mm Positions ATC: 0 CNC Brand: Heidenhain MACH-id 6045 MAKE Nicolas Correa TYPE L30/43 YOP 2004 SPECIFICATIONS X-Axis 4300 mm Y-Axis 1200 mm Z-Axis 2000 mm Table load 10.000 Kg Power on spindle 33 kW Spindle speeds 6000 Rpm Millinghead auto-index 0,02 x 0,02 ° Feed rate X-Axis 25.000 mm/min. Feed rate Y-Axis&nbs ...
used
Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.
used
Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.
used
Universal milling machine with automatic movement ram. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. Vertical head. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.
used
Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg
used
Universal milling machine. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.
Correa A16 X: 1800 - Y: 800 - Z: 800 mm CNC
used
Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)
used
x-travel: 1300 mm y-travel: 700 mm z-travel: 700 mm Control: Heidenhain table surface area: 1700x630 mm Table load: 3000 kg turning speeds: 80-3150 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: total power requirement: 20/27 kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15x6,2x6 m Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Technical data Number of axis total: 3 Table length: 2800 mm Table width: 1000 mm Longitudinal travel (X-axis): 2500 mm Transversal travel (y axis): 1000 mm Vertical travel (z axis): 1000 mm Table load max.: 6000 kg Spindle speeds: stepless up to: 3000 rpm Tool magazine number of tools: 30 Spindle nose: ISO: 50 Voltage 50 Hz 3x: 400 Volt Milling spindle motor: 26 kW Total power required: 36 kW Machine´s weight about: 20000 kg Overall dimensions machine: Length: 7750 mm Width: 3100 mm Height: 4400 mm Various accessories: Feeler Renishaw: MP-18 Chip conveyor Set of toolholders