used LIGMATECH zhr

workpiece return Brand: Ligmatech Type: ZHR 15/XX/RE Year: 1995 for right machine

workpiece return Brand: Ligmatech Type: ZHR 15/XX/LI The workpiece return enables one-man operation on edge banding machines. Workpieces coming out of the machine are roller conveyor, which transports the parts to a lifting station promotes. Via a scissor mechanism the parts are Upper pressure promoted this to an inclined plane, consisting of roller rails, transports. On this inclined roller conveyor, the parts slide by their own weight to the Operator back. The driven roller conveyor is equipped with a turning station the parts coming out of the machine crosswise rotated by 90 degrees and thus conveyed back longitudinally can. To support long transverse arriving parts an additional support roller track is attached, which can be folded down when not in use. Similarly, when not in use, the inclined roller The return path can be folded vertically upwards, so t ...

Workpiece return for single-sided edge banding machines in left-hand design, machine length approx. 8-10m

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift ...

Cabinet press Ligmatech optimat MPH 10 Working width up to 2200 mm Working height up to 1220 mm Working depth up to 600 mm Transport dimensions: 3720x670x3400mm, weight 1300kg

Manufacturer: LIgmatech Transport/Drehstation, Type: Drehstation, Year: ca.1998, Control: no, Working length mm: 1500, Working widht mm: 1200, Total hight mm: 850, Total hight mm: 850, FREE TEXT: Antrieb Band muss nachgrüstet werden, Year :ca.1998

Manufacturer: Limatech, Type: MTB 200/15/08 , Year: 2011, Control: no, Working length mm: 1500, Total hight mm: ca.650 mm, Total hight mm: ca.650 mm, Total power kW: 0,5, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Year :2011

Manufacturer: Ligmatech, Type: MTB 200/25/08, Year: 2011, Control: no, Working length mm: 2000, Working widht mm: 800, Total hight mm: ca.600, Belt width: 800, Total hight mm: ca.600, Engine power kW: 0,75, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Year :2011

Manufacturer: MTH 150/28/08 Ligmatech Korpussabsetzer, Type: Transport und Absetzstation, Year: 2011, Control: no, Working hight mm: ca.400-1200, Machine from production line: war in Linie, Belt transport: yes, Belt width: ca.800, Engine power kW: 0,5, Feeding speed max m/min: 5-20, Feeding speed continous adjustable: möglich, Year :2011

Manufacturer: Ligmatech, Type: Stapelmat ZHK 10, Year: 1990, Control: Ligmatech, Work piece width min-max mm: 140-800, Min.-max. workpiece length in mm: 160-1200, Min.-max. workpiece height in mm: 10-60, Year :1990

Manufacturer: Ligmatech, Type: TD/31/25/12, Year: 1997, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :1997

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

Manufacturer: Ligmatech Korpussaufrichter, Type: MTK 10, Year: 1999, Control: yes, Corpus length max mm: 2200, Working hight mm: ca.500, Pneumatical: yes, Rollentransport: yes, Single machine: yes, Total lenght: 2500, Working hight adjustable mm: yes, Pneumatischer Korpussaufrichter, Year :1999

Manufacturer: Ligmatech, Type: Profi TD/31/25/12, Year: ca.2004, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :ca.2004

Edge banding installation consisting of the following elements: - feed table TB 10/10/20 - edge bander KAR 610/20/PU/S2 - panel turning station cross/longitudinal TD 51/30/12 - destacking robot KUKA KR 180-2 PA - Ligmatech return system installation specifications: workpiece dimensions length 300 - 3200 mm width 120 - 1200 mm (for dogs), 1800 mm (equal to longitudinal entry) thickness 12 - 60 mm weight max 80 kg edging material 0.4 - 2.0 mm throughput speed 25m/min robot 10 strokes /min Equipment edge bander: Infeed fence automatically adjustable anti adhesive sprayers Squaring device UF20: 2 x 4.0 KW Workpiece preheating Glue application unit PU34 6-fold edge magazine for rolls Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment End trims HL86, pneumatic adjustment phase/straight, 2 motors 0.22 kW Rough trimming: 2 x 0.55 KW Contour trimming FF12 , 4 motors 0.4 kW Pr ...

SPECIFICATIONS: 03 Motorized belts mm 7,000 x 1,100 with adjustable stand for longitudinal transport 05 Conveyor belts mm 10,000 x 1,100 with adjustable stand for longitudinal transport 01 motorised belt mm 2,500 x 1,100 with adjustable stand for side-shifting transport

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

Description: ZHR340/L/095 Air table for walk-in ZHR05/ZHR30/ZHR500 Small air table for walk-in Air table manually movable CE package ZHR05,ZHR340. Approx. Onsite Dimension. (l x w x h): 8,510 x 2,625 x 1,000 mm, weight approx.: 1,000 kg

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Edge banding machine Minimum working width: 55 mm with workpiece thickness 22 mm 100 mm with workpiece thickness 60 mm Workpiece thickness 12-60 mm Workpiece overhang 30 mm Edge material strips 0.4 – 20 mm Edge material roll 0.3 – 3 mm Roll diameter max. 830 mm Conveyor chain 80 mm wide with rubber pad Workpiece support Scissor version with roller bearing, max. 1000mm extendable Speed 18 – 24 m/min Workpiece return conveyor Homag Ligmatech ZHR 15/30/L1 Year 1999 Weight 980kg Control – Software: HOMAG HOMATIC NC 21

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,