used IRCO ils

diameter: 15 mm length: 800 mm = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic workpiece loader - max bar length: 720 mm - max dia: 65 mm Previously used on Mazak CNC lathe

automatic workpiece loader - max bar length: 720 mm - max dia: 80 mm Previously used on Mazak Multiplex 620

Rod diameter 5-102 mm Rod length 1600 mm

Short bar loading magazine Manufacturer: BREUNING IRCO ILS Type: MUK 10012 Year of construction: 2014 Technical data (without guarantee): feed distance: 1470 mm Material length: 500 – 1250 mm Material diameter: 6 – 70 mm Material profile/envelope: max. 70 mm Ambient temperature: 10 – 40 °C IP65 certified Supply voltage: 3 x 400 V or 3 x 200 V (from CNC machine) With technical documentation as shown in the pictures Total dimensions: 1800 x 1200 x 1350 mm Total weight: approx. 520 kg

Due to non-use, like new condition. Length max bars 3000 mm Ø max bars 50 mm Multiple spindle Automatic loader Price negotiable

diameter: 35 - max. 65 mm Guide channels: 6 control: SPS max. bar length: 3.200 mm bar material dia.: min. 35 mm bar material dia.: max. 65 mm total power requirement: 2 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 4,0 x 1,1 x 1,6 m Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bar feeder after repair. All mechanisms diagnosed and inserts replaced in 2022. Machine Parameters: 8 channels max bar length: 3200 mm

IRCO Profimat 65.6/196.6

bar diameter 65 mm bar length 3000 mm

Irco Breuning Profimat 100.8340.8 Year of construction: 2001 what installed on an Index G300 (2003). Channels are available from Ø60mm in 5mm increments to Ø100mm.

workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ø 65 - 3000mm Dimensions: 1700x5300mm Connected to this machine: Gildemeister Twin 65

diameter:15,20,25,30,35,40,45,50 mm Bar pusher diameter:16, 20,25,30,35,40,45,50 mm Channel diameter:17,22,27,32,37,42,47,52 mm bar length:3000 mm Center of spindle height above floor:1110 - 1230 mm dimensions of the machine ca.:5x012x1,8 m weight of the machine ca.:2,5 t Bar feeder magazine which can change channels automatically for 8 different diameters: 50 / 45 / 40 / 35 / 30 / 25 / 20 / 15 mm Turret system. Smallest diameter is 10 mm Bar loader was installedat a Biglia B 445 3T 3Y

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M3 ILS YOC: 2022 capacity: 135 cbm/h working hours: 0,0 Mixer: Stetter twin shaft mixer – Stetter DW 3,0 Mixer cleaning system optional Storage bins / inline silo: 6 bins = 2 x 30 m³ + 4 x 15 m³ (total 120 m³) Silos: Optional 2-6 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport “free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference EASYBATCH plants by appointmen ...

GeneralTurning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline Technical DataDrive power (100% DC)13,2 kWDrive power (40% DC)22 kWTorque (40% DC)100 NmSpeed range20-12000 rpmB axis, slide 1Swivelling range+/- 120 degreeSlide 3Transverse stroke1500 mmRapid traverse Z36 m/minSlide 2Longitudinal stroke1400 mmTransverse stroke225 mmRapid traverse X24 m/minRapid traverse Z40 m/minSlide 1Longitudinal stroke1585 mmTransverse stroke550 mmY axis, vertic ...

Key data: 45 mm

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

Year of construction 2014 Control Siemens 840 Dsl Main Spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Bar passage 50 mm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Counter spindle: Motor Spindle Technology Speed 7,000 rpm Power 16 kW Torque 75 Nm Workpiece clamping collet chuck, Hainbuch Kombi Axfix Gr. 52 Tool carrier I (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 165/70/360 mm Rapid traverse in X/Y/Z 30/15/60 m/min Tool carrier II (X/Y/Z/B): Technology turret with 12 stations and swivel axis Tool holder VDI 25 Tool drive 8,000 rpm, 1.5 kW, 10 Nm Travel in X/Y/Z 215/70/740 mm Rapid traverse in X/Y/Z 30/15/60 m/min B-axis -23.5°/158.5° Tool carrier III (X/Y/Z): Technology turret with 12 stations Tool holder VDI 25 Tool drive 8,000 r ...

Key data: 500 mm, 525 mm, 6000 1/min

DMG-MORI CTX 500 alpha V3 2012 Turning length 500 mm, with main spindle as integrated spindle motor, ISM 52 Plus Spindle speed 10 – 6 000 rpm, partial hollow clamping device (Hydr) Inner diameter 52 mm C-axis with spindle brake 12-speed Sauter Disc Turret with Tool Drive Direct measuring system Tailstock, chip conveyor with coolant device Siemens 840 D Solution-Line control system with DMG ergoline and Shopturn Bar Machining Packages Workpiece pick-up device Connection for bar loading magazine Short bar loading magazine Fabr. IRCO Type ILS-RBK 100/12 Window cleaning of the safety window

Specifications (manufacturer): -Manufacturer: Multimatic iLSA Germany GmbH & co. KG -with armrest bracket -with JUN-AIR compressor -TURN DW 300 electronic

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Dia ...

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2**) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3***) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4****) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Dia ...

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1*), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2**), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3***), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4****), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2**), 60m/min., Spindle 20-1 ...

Machine Details Warehouse number 1105-03604 Machine type CNC lathe GILDEMEISTER/gratziano brand Type GP 50 Year of construction 2000 Control type CNC Control FANUC 18 I Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from location Technical details Rod diameter 50 mm Chuck diameter 150 mm Turning length 500 mm Speed 6000/5000 rpm Indexing per C-axis, 0.001° degrees Tapping spindle yes/yes Rod diameter 50 mm Speed 5000 rpm Indexing per C-axis, 0.001° degrees Turret head (x-fold) 2x 12-speed VDI 30 Driven tool stations 2x 12 Control FANUC 18 I Coolant emulsion Total power requirement 45 kW Machine weight approx. 6 t Space requirement approx. 4.8 x 2.2 x 2 (+Irco) m Chip conveyor Bürener Maschinenfabrik Addition Energized and ready to demonstrate ya Accessories Tool holder 10 rigid, 3 driven pieces / off Part ...

Textile cleaning machine Multimatic PIUMA N 320 with distillation module VD 160 Manufacturer: Multimatic ILSA Deutschland GmbH & Co. KG, 49324 Melle, Germany Year of Make: 2021 Description Drum volume: 320 liters Filling quantity: 16 kg with a filling factor of 1:20 Easily accessible, compact machine platform Basic machine/basic module (W x D x H in mm): 1076 x 1990 x 2140 (990 x 1990 x 1980 mm simply dismantled) Machine structure: - High-spinning, free-swinging drum unit - Resonating tank assembly, consisting of 2 stainless steel tanks with a volume of 80 and 90 litres, to compensate for the kinetic energy during spin-up and to prevent dirt deposits - Tank bottom with double slope - High-quality Oberwacht spring-damper system to minimise dynamic loads - Special stainless steel drum with a diameter of 850 mm and high-torque drum drive - Intelligent PLC-assisted spi ...