used IMET sirio

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm ** Current new price approx. 25.000 euros ** Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast i ...

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

Capacity 350 x 270 mm Material probe Two sided miter

Capacity round maximum diameter: 130 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 370 mm MACH-id    5176 MAKE        IMET Italia TYPE          SIRIO 370 SH-E / ESC YOP            2016 SPECIFICATIONS Bandsaw / Circelblade / Automat       Disc Saw Angle L / R Degrees      - 45 / 90 / + 30 Cutting capacity 90 ˚ Ø    130 mm Cuttting capacity 90 ˚ Flatt       180 x 100 mm blade dimensions     370 mm roller conveyor / push up / measuring     6000 Cutting speed M/min    70 M/min DIMENSIONS Length       14.000 mm Width          2.000 mm Height        2.000 mm

Semi-automatic Double-sided miter inpsection possible video available

Capacity 300 x 180 mm / ø 255 mm / square 230 x 230 mm Semi-automatic Double-sided miter 0-60 left / 0-45 right

equipped with material clamp, coolant pump,

Bandsaw with left and right tilting / mitre cutting Machine already ready for transport, machine can be viewed on viewing day for correct assessment.

Bandsaw with left and right tilting / mitre cutting Machine already ready for transport, machine can be viewed on viewing day for correct assessment.

Semi-automatic Double-sided miter Capacity 240 x 280 mm

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 315 mm, 110 mm

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

: gebraucht : 2022 : 6225 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 1800 / 3600 U/Min : 45 ° : 45 ° : rund 120 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 65 mm, Quadratprofil : 1,5/1,8 kW : 610 mm : 880 mm : 990 mm : 163 kg DEMO MACHINE - MINT CONDITION manual circular saw for aluminium stops at0°, 15°, 30°, 45°left and right hand-wheel to lock the head on all angles, graduation engraved on the worktable pair of front vices with quick clamping, free to move alongside the worktable aluminium removable jaws sawing blade protection material stop coolant equiptment head return by springs pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6232 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 350 x (2)2,5 x 32 mm : 30/60 U/Min : 45 ° : 45 ° : rund 125 mm, Quadratprofi : rund 105 mm, Quadratprofi : rund 70 mm, Quadratprofil : 1,8/2,5 kW : 600 mm : 1220 mm : 1060 mm : 206 kg DEMO MACHINE - MINT CONDITION very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 230 mm capacity 90 degrees: square: 230 mm : 280 x 150 band speed: 35/70 m/min saw band length: 2770 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 kg Dimensions (LxWxH): 1,5 x 1,2 x 1,3 0 Band saw including micro spray device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glass bottle washer, MAG Schymanski Enomeco, year: 2000, complete stainless steel, Siemens S7, for 330 ml + 500 ml and 500 ml bottle with swing stopper clip lock, capacity up to 7,000 bph.

Bottle washer, make MAG, type: Sirio 7, single-end machine, for 6.000-13.000 Fl/h, 10 bottles/row, with 80 mm bottle cells, built 1992

Technical Data and Specifications Mag Schymanski bottle washing machine typ Sirio 7-10 Capacity:3600-8000 bph Machine design: stainless steel Working method: Continuous Max. bottle diameter: 75 mm Max.bottle height: 290 mm Bottles in machine: 1,720 pieces Bottle cell carrier: 172 pieces Cell pitch: 95 mm Chain pitch: 140 mm Power consumption: 12.33 kw Fresh water conn.: 2,300 liters per hour at 1.5 bar Heat requirement: hourly output x 14.01 = requirement Kcl. Empty weight : 12,000 kg Full weight : 19,000 kg Length: 7000mm Width: 2095mm Height: 3000mm

Overview The bottle washer Sirio 7 from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...