used IMET bs

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

Capacity round maximum diameter: 130 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 370 mm MACH-id    5176 MAKE        IMET Italia TYPE          SIRIO 370 SH-E / ESC YOP            2016 SPECIFICATIONS Bandsaw / Circelblade / Automat       Disc Saw Angle L / R Degrees      - 45 / 90 / + 30 Cutting capacity 90 ˚ Ø    130 mm Cuttting capacity 90 ˚ Flatt       180 x 100 mm blade dimensions     370 mm roller conveyor / push up / measuring     6000 Cutting speed M/min    70 M/min DIMENSIONS Length       14.000 mm Width          2.000 mm Height        2.000 mm

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm ** Current new price approx. 25.000 euros ** Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast i ...

Key data: 315 mm, 110 mm

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

Capacity 350 x 270 mm Material probe Two sided miter

Semi-automatic Double-sided miter inpsection possible video available

Capacity 300 x 180 mm / ø 255 mm / square 230 x 230 mm Semi-automatic Double-sided miter 0-60 left / 0-45 right

equipped with material clamp, coolant pump,

Bandsaw with left and right tilting / mitre cutting Machine already ready for transport, machine can be viewed on viewing day for correct assessment.

Bandsaw with left and right tilting / mitre cutting Machine already ready for transport, machine can be viewed on viewing day for correct assessment.

Semi-automatic Double-sided miter Capacity 240 x 280 mm

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6225 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 1800 / 3600 U/Min : 45 ° : 45 ° : rund 120 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 65 mm, Quadratprofil : 1,5/1,8 kW : 610 mm : 880 mm : 990 mm : 163 kg DEMO MACHINE - MINT CONDITION manual circular saw for aluminium stops at0°, 15°, 30°, 45°left and right hand-wheel to lock the head on all angles, graduation engraved on the worktable pair of front vices with quick clamping, free to move alongside the worktable aluminium removable jaws sawing blade protection material stop coolant equiptment head return by springs pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6232 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 350 x (2)2,5 x 32 mm : 30/60 U/Min : 45 ° : 45 ° : rund 125 mm, Quadratprofi : rund 105 mm, Quadratprofi : rund 70 mm, Quadratprofil : 1,8/2,5 kW : 600 mm : 1220 mm : 1060 mm : 206 kg DEMO MACHINE - MINT CONDITION very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 230 mm capacity 90 degrees: square: 230 mm : 280 x 150 band speed: 35/70 m/min saw band length: 2770 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 kg Dimensions (LxWxH): 1,5 x 1,2 x 1,3 0 Band saw including micro spray device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Variable speed drive. Volume flow 1.57 - 6.25 m3/min. With Sigma control. With energy recovery. New mineral oil.

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repair ...

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repair ...

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repair ...

R22352/11 SCHWALBACH cross cutting machine model: BS 65 age: about 1995 cutting width: 650 mm fully automatic cutting length: 4 - 1000 mm reel diameter: max. 300 mm material: foil, PVC- laminated tissue 0,1 - 1mm dimension: 1000 x 600 x 1000mm(w x d x h) Available: nach Absprache

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.

Kaeser Compressor package: - Kaeser CS75, 1992 year - 1 pcs. - Kaeser AS35, 1983-1992 year - 6 pcs. - Kaeser SK18, 1981-1982 year - 2 pcs. - Kaeser BS50, 1993 year - 1 pcs. - Kaeser SK25, 1987 year - 1 pcs. all operating in good condition.

Factory new with dust extraction automatic belt centering Tool-less change of the sanding belt Sanding belt 60 grit 2000 x 75 mm Band width 150 mm Plan grinding range 500 mm Belt speed 15 / 30 m / s Weight 120 kg Motor pole change-over bar 2.2 / 3,75 kW Suction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Lieferumpfang: incl. belt 60 grit Connection cable with CEE plug 16 A Dust bag 1 year warranty including packaging and transport in Germany