used HOLZ HER 14

Description: Edgebander with tilting unit. For edgebanding doors, with the following groups: Entrance guides with SIKOR counters Joint trimming unit regulated by SIKORS Gluing unit with electronic positioning cartridges Snipping unit with 2 motors Fixed fine trimming unit Tilting fine trimming unit Profile Scraping unit Profile trimming unit with 1 motor Scraping unit Cleaning brushes unit Joint triming unit for grooving 0-90º Sanding unit NOTE: The return system is not included The heater does not work. serial number: 105/0-212, packing measure approx (l x w x h): 1,200 x 2,000 x 2,000 mm, Approx. Onsite Dimension. (l x w x h): 1,200 x 2,000 x 2,000 mm, weight approx.: 4,000 kg

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper

Edge banding Holz-Her Type: 1417 Sprint Year of construction: 1999 Banding thickness max. 8 mm Workpiece thickness = banding height 6 – 45 mm Workpiece width min. 60 mm Workpiece length min. 180 mm Workpiece protrusion via the transport chain on the assembly side 30 mm Feed speed 11 m/min. Feed motor 1.5 kW Swivel control panel Machinery: Pre-milling unit 1961 Edge feeding 1901 - fully automatic edge feeding of roll goods and stiff goods Glue application station 1906 or 1910 cartridge system Printed in 1913 Cross-cut unit 1918 – 2 cross-cut saw motors guided diagonally on round bars Milling unit 1942 – flush/radius/chamfering station Milling unit 1942 M – flush/radius/chamfering station Scraper unit 1929 - for radii up to 3 mm Form milling unit 1983 – 1 motor 0.6 kW 18000 rpm, copy corners up to 3 mm edge thickness Surface scraper unit 1964 – for  ...

Workpiece thickness: max. 45mm, workpiece length: min. 180mm, workpiece width: min. 60mm, pressure force of a roller: approx. 400N, feed speed: 16m/min max. With documentation, an on-site inspection is possible.

well-kept HolzHer 1422 K Banding thickness up to 20mm Gluing, capping, flush or radius milling Total length approx. 3450mm

Edge banding machine wood Her Express 1437 Banding height max. 51 mm Edge thickness 0.3 - 13 mm Swivelling control panel Hot melt adhesive application - cartridge system Car. Edge magazine Full car. Edge feeding for roll and strip goods Printed work Cross-cut unit swivelling 0° - 15° Bevel radius milling Drawing blade unit Buffing unit immersion-controlled Soundproofing booth Machine length approx. 4500 mm Machine in working order From the carpentry site

Manufacturer: HolzHer, Type: 1411-1, Year: 2001, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 230, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11, Glue system granulate/cartridge: Patrone, Buffing unit: yes, Machine lenght mm: ca. 4.100, Wight approx. kg: ca. 1.100, Year :2001

Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991

Wood Her Sprint 1411K Edge banding machine complete in basic configuration with pneumatic printing unit Extendable workpiece support groping nozzle Blowing nozzle Chip collection box pneumatic adjustment of the milling machine and scraper blade Surface scraper blade Special cylinders for edge transport G&-5061-O0945

: 0,4-5 mm Workingpiece thickness from to: 6-45 mm Total length: 2680 mm Feed speed: 5 m/min. total power requirement: kw Weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is WORKING IN GOOD CONDITION from stock Lieboch

Description: Spindle moulder group in input Glue group End trimming group Straight trimming group Inclined trimming group Profile group 1 motor , NOTES: Electronic machine and the PLC does not work serial number: 365/0-602 5005052, Approx. Onsite Dimension. (l x w x h): 10,200 x 1,800 x 1,900 mm, weight approx.: 2,500 kg

Vertical Wall Saw Holz-her 1265 Year of construction 1990 Serial number 1264/8-611 Maximum cutting height 1925mm Maximum cutting width 4300mm Maximum cutting depth 50mm Saw blade 220mm Saw motor 3kW 380V 5150x1000x2500mm, weight 800kg

Manufacturer: Holz-Her Fräsständer, for left machine side: links, Number of motors: 2, kW-Leistung : 2,2, Drehzahlen U/min : 11600, Horizontal Rollentastung : yes, Vertical roller sensing: yes,

I am selling an edge banding machine Holz-Her Sprint 1310, built in 2004. Configuration: Edge banding Cartridge glue Cross-cut saws Swivelling radius milling machines Radius pulling blade Polishing brushes Very good condition, fully operational.

Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Woodworking Center Holz-Her Easy Master 7015 CNC Equipment and technical data: Software: TwinCAM 32 Milling unit power 4.4 KW, clockwise rotation, 1000-18000 rpm, tool holder sleeve Dmax = 16mm Workpiece support with 4 brackets that can be slid in the X direction, mechanically fastened, each with 2 vacuum cups Travel paths X axis 2.685 mm Y axis 1.09 mm Z axis 140 mm Siemens digital servo drives 4-way side tool changer Boring head: 9 vertical boring spindles in a 32 mm grid. 1 double drilling spindle for horizontal drilling 1 grooving saw assembly, 1.5 KW outer diameter 120mm inner diameter 20mm Vacuum pump with a capacity of 40m³ / h, including vacuum suction Safety mats in the work area Year of construction 2001 Weight approx. 3500 kg. Equipment used only for a short time as a demonstration in school. Very little job translation. The device is in very good condit ...

HOLZ-HER 341 Panel saw Panel size max. 5.2 x 2.2 m Dimensions WxHxD 6 x 3 x 1.3m G&2974-M328I

Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm PLC Screen Control Edgecontrol Motorized, positioning-controlled bridge height adjustment Pre-milling unit for fastening upstream of the gluing station Fully automatic edge magazine for rolls and strips Glue application station cartridges + PU gluing Car. Glue height adjustment / tactile nozzle Printed plant 1913 pneum. Cross-cut unit for rolls and strips 1918 - 15 mm with pneumatic changeover of 0-10° incline of the cross-cut saws Multifunctional milling unit with mot. Adjustment: Flush milling - 15 mm, radii and bevel milling -15° Frommilling unit - corner rounds 1833 Scraper unit for chamfers and radii 1929 pneum. pneumatic indentation and disengagement Surface Scraper Unit - Finish pneum. Buffing unit for replastering and edge polishing with 2 textile discs HIGH-END spraying device Compl ...

Holz Her Sprint 1317 FÜ + PU Heavy version - edge thickness 0.4 - 8 mm PLC Screen Control Edgecontrol Power PC Pre-milling unit for joining in front of the gluing part 1961 Mot. Inlet ruler Fully automatic edge magazine for roll and strip goods MOT 1903 Glue application station cartridges + PU gluing 1905 Multi Adhesive application using nozzle technology Workpiece height 6-50 mm car. Glue height adjustment Printing unit pneumatic 1913 Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit 1826 MOT 4 NC axes, flush milling 8 mm, radius milling - chamfer milling - 15° Shape milling unit 1832 Rounding of corners up to edge thickness 3 mm in continuous flow Scraper unit for chamfers and radii with 2 scraper carriers - pneum. Pneumatic engagement and disengagement Surface Scraper Unit  ...

Edge banding machine Holz-Her Sprint 1312 Year of construction 2006 380V Pre-milling unit (1961), 2x2.0kW, 12000 rpm Multi Glue System (1905), For EVA and PUR adhesives in pattern and grain form. Pressure unit (1913), Equipped with a pneumatic guillotine Hacksaw unit (1918), 2x 0.35 kW 9000rpm, Tiltable from 0 to 10 degrees Angle milling unit (1942), 2x0.6kW, 18000 Rpm, tiltable from 0 to 15 degrees Radius scraper (1929), max R3 Flat scraper (1964), regulated separately at the top and bottom Edge thickness 0.4 - 15 mm Edge height 65 mm Min cutting edge length 350 mm Workpiece width min. 60mm Workpiece length min. 180mm 5500x1000x1700mm (LxWxH), +/- 2500kg

Edge banding machine Holz-Her Sprint 1317-2 Year of construction 2006 380V Pre-milling unit (1961), 2x2.0kW, 12000 rpm Multi Glue System (1905), For EVA and PUR adhesives in pattern and grain form. Pressure unit (1913), Equipped with a pneumatic guillotine Hacksaw unit (1918), 2x 0.35 kW 9000rpm, Tiltable from 0 to 10 degrees Radius scraper (1929), max R3 Profile copy unit (1832), 1x0,22kW 9000rpm Flat scraper (1964), regulated separately at the top and bottom Edge thickness 0.4 - 8 mm Edge height 55 mm Min cutting edge length 350 mm Workpiece width min. 60mm Workpiece length min. 180mm Throughput 8/16 m/min, infinitely variable. 5950x1000x1700mm (LxWxH), +/- 2500kg

Description: HOLZ-HER TECTRA 6120 CLASSIC Horizontal Panel Saw Cutting length x cutting width: 3,100 x 3,100 mm 4,400 x 3,100 mm 4,400 x 4,250 mm Max. saw blade projection: 82 mm SAW UNIT Motor output: 7.5 kW Saw blade dia.: 350 x 4.4 x 30 mm Speed: 1,000 - 4,070 rpm SCORING UNIT Motor output: 2.2 Kw Saw blade dia.: 180 x 4.4/5.4 x 30 mm Speed: 1,000 - 5,400 rpm SAW CARRIAGE Feed rate: 1 - 70 m/min Return rate: 70 m/min RIP FENCE Feed rate: 25 m/min Return rate: 100 m/min WORKING CLAMPS Clamp opening dimensions: 82 Cutting length 3,100 mm 5 Each:  ,2 additional Cutting length 4,400 mm 6 Each: 3 additional AIR CUSHION TABLES Cutting length 3,100 / 4,400 mm: 3 Each OPERATION CONTROL 21.5” standard monitor (Windows operating system) COMPRESSED AIR Operating pressure: 6 Bar Air consumption NL/cutting cycle: 32 EVACUATION Basic machine connection dia.: 1 x 160 mm Pressure bea ...

Description: HOLZ-HER LUMINA 1380 Edgebander Feed rate: 10 - 18 m/min Operating dimensions Minimum workpiece length: 160 mm Minimum workpiece width: 60 mm Workpiece thickness: 8 - 60 mm Edging thickness: 0.4 - 8 (15) mm Approx. Onsite Dimension. (l x w x h): 5,740 x 1,200 x 2,100 mm, weight approx.: 2,000 kg, Serial Number of Manufacturer: 289/1-907