We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Hebrock AKV3005DK-F edge banding machine with joints, corner copying and two scraper blades. Very neat machine from small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, optional equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins available, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was purchased only for one order. Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness ma ...
used
Edge gluing machine Hebrock AKV 3003 DKF Glues, caps, flush milling with radius cutter L x W x H: 4300 x 800 x 17500 mm Weight approx. 650 kg Built in 2005 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997
used
Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997
used
Coming soon Used edge banding machine Manufacturer: Hebrock Type AKV 2000 DK YOC 1983 Transport dimensions approx. 2.30 m x 1.00 m x 1.30 m, weight approx. 650 kg Location: currently in the Bergisches Land (near Wermelskirchen) Coming soon: in Unna Price ex location: 1.600,-€ net + 19 VAT = 1.904,-€ gross Price in Unna: 1.900,-€ + 19 % VAT = 2.261,-€ gross The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / ...
used
Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg
used
Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg
used
Brand: Hebrock Model: AKV83 Year of construction: 1992 Specifications: Edge thickness 0,4 - 5,0mm Roll ø750 mm Plate thickness max. 10-60 mm Workpiece length: min. 170 mm Connection: 230V, 40Hz Relay Control 1.Hot air (Phön) 3 KW, heat time: 1 min. 1. Caper knife - front & rear same product capping 6. Flat milling top & bottom Feed 4 m/min. Air pressure 7 - 8 bar Machine dimensions: LxHxW 1.750 * 800 * 1.250 mm (incl. plate) Machine weight: 95 KG
used
Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit
used
Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...
used
Key data: 1 mm
Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well ...
used
Description: Quick melt glue pot Heated infeed fence Roll trimmer: pneumatic up to 3 mm HF End trim saw 1st Top/Bottom trimming station 2nd Top/Bottom trimmimg station undercarriage edge magazine with: 1 -fold roller, edge thickness: 0.4 - 5 mm, workpiece thickness: 40 mm, workpiece pre heater: ✔, snipping unit: ✔, fine trimming unit: ✔, total power approx: 11 kW, packing measure approx (l x w x h): 4,000 x 1,800 x 1,600 mm, Approx. Onsite Dimension. (l x w x h): 3,600 x 1,400 x 1,200 mm, weight approx.: 690 kg
used
Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping
used
Edge banding machine Hebrock EURO 2000 Year of construction 1996 Minimum panel length 250 mm Minimum panel width: 70 mm Min/max thickness of panel: 10/40 mm Min/max edge thickness: 0.4/5 mm Feed speed: 11 m/min Warm-up time; approx 4,5min Power requirement: 415 V - 3 phase - 20 amp insulator Compressed air: 7 bar Transport dimensions: 3300x1400x1300mm (LxWxH) weight 550kg
used
Hebrock EBM EBM KDP 112 SLK Year of construction 1999 Minimum panel length 260 mm Minimum panel width: 90 mm Min/max thickness of panel: 10/45 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10 m/min 400V, 11,5kW
used
Hebrock EBM EBM KDP 112 SLK Year of construction 1999 Minimum panel length 260 mm Minimum panel width: 90 mm Min/max thickness of panel: 10/45 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10 m/min 400V, 11,5kW
used
Series standard, direct gluing application, outrigger table for edge material, visual display of workpiece sequence, high frequency, wood chip container (crosscut saw), pneumatic milling (silhouette construction method, Hebrock system) , control center, conveyor chain with fixed special mit scraping special chain plates, upper pressure by double roller (ball bearings), cantilever (extendable to the front), automatic central lubrication (crosscut saw, angle milling tool), reservoir for hot melt (maintenance-free, Teflon coated)
used
Edge gluing machine Hebrock Euro 2000 Gluing, flush milling without cap L x W x H: 1.8 x 0.9 x 1.3 m Built in 2007 Weight approx. 300 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993
used
Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998
used
Equipment: -Chassis - Quick-heating glue container - Support plate for rolls - Roll capping - Cross-cut saw - Flush milling Radius/Straight/Chamfer - Suction nozzle Ø 100 mm Specifications: Power ratings: 400 V, 50 Hz, 13.3 A, 7 kW max. edge thickness 5 mm max. workpiece height 40 mm min. workpiece length 300 mm Feed speed 11 m/min Ready for use in approx. 4.5 min Work table height 900 mm Dimensions: 3,300 x 1,400 x 1,300 mm Weight approx. 550 kg All information is subject to change of the actual equipment
used
Key data: 3 mm, 10 mm, 4300 mm
Edge banding machine Fabr. Hebrock Type Top 3003 F max. edge thickness 3mm max. workpiece height 60 mm Joining milling unit max. 2mm Roll capping Gluing unit 5 min. heat-up time Kappagregat 1 sawing system, 0.37 kW Flush milling unit top and bottom, 2 motors 0.37 kW with single-use combi plates for straight, radius and bevel milling Corner milling unit 0.37 kW with combination disposable plates for radius and bevel milling Surface scraper blade Machine length 4300 mm Feed rate 10 m/min Extraction connection 120 and 80 mm Chassis
used
max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Milling speed : 12000 rpm Work table height: 865 mm Radius 3 mm tooling
used
sheet width: max. 1500 mm plate thickness: 2,5 mm serial number: 150393 weight: 1300 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stock number: 3766 SLITTING LINE LONG STEEP LINE Manufacturer: AKV, Type: 1250 x 0.4 - 3 mm - 2238 Year of construction: 1989 Specifications: Size sheet width 1270 mm Min/Max. sheet thickness 0.4 - 3 mm mm Feed speed 0-65 m/min - Strip shears 0.4 - 3 mm - Discharge reel 12 T - Reel reel 12 T - Low discharge 12 t Accessories: Coil carriager 12 T