We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
new
: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Center height: 200 mm Center width: 1250 mm gr. Turn-Ø over bed: 400 mm Spindle bore: 55 mm Spindle holder: Camlock D1 6" mm Pick-up cone of tailstock quilts: 5 MK Spindle speeds: 1-297/1-861/1-2700 rpm electr. Connection: 400 V, 7.5 kW Space requirement: 2900 x 1800 x 1500 mm Weight: 2200 kg
used
Center height: 200 mm Center width: 1250 mm gr. Turn-Ø over bed: 400 mm Spindle bore: 55 mm Spindle holder: Camlock D1 6" mm Pick-up cone of tailstock quilts: 5 MK Spindle speeds: 1-297/1-861/1-2700 rpm electr. Connection: 400 V, 7.5 kW Space requirement: 2900 x 1800 x 1500 mm Weight: 2200 kg
new
: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 554 mm turning length: 1000 mm control: Fanuc total power requirement: 11 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton
used
This Harrison M390 Lathe was manufactured in the year 2004 in United Kingdom. It has 2 axis. The machine has a spindle speed of 2000 rpm.
used
including quick-change chisel holders, 2 rotating centers
used
Harrison M500 Ø 530 x 2000 mm Distance between centers: 2000 mm Swing over bed: 530 mm Swing over cross-slide: 370 mm Swing in gap: 730 mm (200 mm long) Diametre of main spindle bore: 80 mm Power on main spindle: 9,7 kW Number of speeds: 31 > 1600 rpm Length: 3450 mm Width : 1170 mm Height: 1830 mm Weight: 2277 kg
used
Key data: 200 mm, 400 mm, 40 U/min
Harrison in TOP CONDITION. SH 200 mm SW 1500 mm Tailstock MK5 Removable bridge Emergency Out , Bremese , Feed Protection Coolant system Face plate 2 lathe chuck Grinding device Cabinet with high-quality accessories.
used
Key data: 380 mm, 1200 mm
Turning length: 1200 mm Rotation diameter: 380 mm above bed Spindle Passage: 50 mm Spindle speeds: 35 - 1,500 rpm. Equipped with: - 3-jaw chuck with different jaws - Steel tank Country of origin: UK Machine LxWxH: 2500 x 950 x 1200 mm Machine weight: 1200 kg
used
: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Digital readout, quick-change cartridge holder PARAT, 3-jaw chuck SCHUNK ROTA-S, diameter 200 mm, centre height 195 mm, centre distance 1250 mm, turning diameter over bed 400 mm, over face slide 246 mm, in the offset 585 mm, spindle bore 54 mm, Morse taper in the bush MK 4, spindle speed 5 to 2500 rpm, slide guide width 318 mm, face slide 850 x 180 mm, travel 250 mm, top slide width 100 mm, travel 130 mm, tailstock quill diameter 73 mm, Morse taper MK 4, lead screw diameter 32 mm, thread metric pitch 0.2 to 14 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 2,500 x 1,100 mm
used
Description: Digital readout, quick-change cassette holder PARAT, 3-jaw chuck SCHUNK ROTA-S, diameter 200 mm, centre height 195 mm, centre distance 1250 mm, turning diameter over bed 400 mm, over face slide 246 mm, in the offset 585 mm, spindle bore 54 mm, Morse taper in the socket MK 4, spindle speed 5 to 2500 rpm, slide guide width 318 mm, face slide 850 x 180 mm, travel 250 mm, top slide width 100 mm, travel 130 mm, tailstock quill diameter 73 mm, Morse taper MK 4, lead screw diameter 32 mm, thread metric pitch 0.2 to 14 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 2,500 x 1,100 mm
used
Description: Digital readout, quick-change cartridge holder PARAT, 3-jaw chuck SCHUNK ROTA-S, diameter 200 mm, centre height 195 mm, centre distance 1250 mm, turning diameter over bed 400 mm, over face slide 246 mm, in the offset 585 mm, spindle bore 54 mm, Morse taper in the MK 4 bushing, spindle speed 5 to 2500 rpm, slide guide width 318 mm, face slide 850 x 180 mm, travel 250 mm, top slide width 100 mm, travel 130 mm, tailstock quill diameter 73 mm, Morse taper MK 4, lead screw diameter 32 mm, thread metric pitch 0.2 to 14 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 2,500 x 1,100 mm
used
Description: Centre height 280 mm, centre width 2000 mm, bottom centre 1175 mm, turning diameter over bed 554 mm, over face slide 370 mm, in the offset 830 mm, spindle bore 90 mm, mounting taper MK 5, spindle speed 15 to 1800 rpm, main motor 11 kW, Bet: Band width 400 mm, top slide width 100 mm, travel 190 mm, tailstock quill diameter 95 mm, quill travel 145 mm, MK 6, thread metric pitch 0.2 to 14 mm, including digital readout, 3-jaw chuck SCHUNK ROTA-S 315, quick-change cassette holder PARAT weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 3,600 x 1,300 mm
used
Quick Frame Alpha 4 (Italy) Product name: Quick Frame Model: Alpha 4 Manufacturer: Alfamacchine (Italy) Sales: Bohle AG Serial no.: 46096 Year of construction: 2003 Condition: Used and tested technical details: for making picture frames Weight: 36 kg with foot switch for hardwood (oak), medium hard wood (ramin), softwood (pine, pine) necessary working pressure: 4 - 7 bar Pressure gauges Manual adjustment for working pressure incl. compressor (SIL. AIR, Italy) Operating instructions Spare parts list incl. bracket assortment (photo) Compressor data (SIL. AIR 30-9) Tank capacity: 9 L Flow rate: 50 L/min Pressure: 8 bar (adjustable) Year of construction: 06/1991 Voltage: 230 V Current: 2.4 A Power: 340 W incl. connection hose Device dimensions (L x W x H): 560 x 300 x 400 mm Our price: Quick frame: 890,00 € (EUR) FP plus VAT ex Grunow (Brande ...
used
Quick Frame Alpha 4 (Italy) Product name: Quick Frame Model: Alpha 4 Manufacturer: Alfamacchine (Italy) Sales: Bohle AG Serial no.: 46096 Year of construction: 2003 Condition: Used and tested technical details: for making picture frames Weight: 36 kg with foot switch for hardwood (oak), medium hard wood (ramin), softwood (pine, pine) necessary working pressure: 4 - 7 bar Pressure gauges Manual adjustment for working pressure incl. compressor (SIL. AIR, Italy) Operating instructions Spare parts list incl. bracket assortment (photo) Compressor data (SIL. AIR 30-9) Tank capacity: 9 L Flow rate: 50 L/min Pressure: 8 bar (adjustable) Year of construction: 06/1991 Voltage: 230 V Current: 2.4 A Power: 340 W incl. connection hose Device dimensions (L x W x H): 560 x 300 x 400 mm Our price: Quick frame: 890,00 € (EUR) FP plus VAT ex Grunow (Brande ...
used
Produkbezeichnung, industrial ink-jet printers Manufacturer: Metronic Model: Alpha Jet Year of construction: 1998 Additional information: see also bite photo Information without guarantee
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
CNC Portal Laser Cutting Machine Manufacturer: ESAB Type: Alpharex AXC 7000 Built: 1998 CNC control: NCE620 Working range: 5,000 mm x 27,000 mm Laser type: TLF 4000 t Suction table: Beuting without suction
used
Compact system for separating, marking and marking outside the production line. It is ideal for MHD, LOT, batch number, time, sequential numbering, barcode, data matrix, shift identification, price, weight and logo, for addressing and personalizing, as well as for creating small-format printing applications. Industry recommendation for: Pharmaceuticals, Chemicals, Cosmetics, Food, Clothing, Consumer Goods, Automotive, Electrical, Contract Packaging, Printing House. System is complete with BetaJet verso and 2 AlphaJet Plant is immediately available