We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
- Condition: used
used
This HAAS ST 40 Lathe was manufactured in the year 2014 in the United States. It is equipped with a HAAS control unit. The machine disposes of a main spindle , a chip conveyor and a tailstock.
used
This HAAS ST 40 Lathe was manufactured in the year 2021 in the United States.It is equipped with a HAAS control unit. The machine disposes of a spindle with chip conveyor and 2 axis.
used
Max. turning diameter over support 228 mm Max. turning diameter over bed 412 mm Max. turning length 350 mm Travel X/Z axis 200/356 mm Travel Y-axis +/- 50 mm Max. feed speed X-axis 12 m/min Max. feed speed Z-axis 8 m/min Spindle passage 44 mm Main spindle speed range 0 - 6,000 1/min Tool holder VDI 40 Driven tool speed 4,000 1/min C-axis 0.02 degrees Tailstock Tool Measurement Control HAAS Machine weight approx. 3,800 kg Very good condition
used
Haas ST 30 Y CNC Lathe with very low working hour Cycle time of 3800 hours, so it is relatively new machine. It has turret with BMT65 holders. Machine in full spec; Part catcher Tailstock Renishaw tool setter 20 bar high pressure coolant Cool cabinet for electro wardrobe 3 pieces fixed axial tool holder BMT65 3 pieces fixed radial tool holder BMT65 Only 4000 working hours, yom. 2019 VPS(active visual programming system) NGC new generation of numeric control 10â jaw chuck Machine is working under power in full capacity.
used
- Wafer size: D = 57 mm, L = 76 mm
used
Max Cutting Diameter (varies with turret) : 254 mm Max Cutting Length (without workholding ) : 553 mm Over Front Apron 806 mm Over Cross Slide 527 mm Over Tailstock 584 mm Bar Capacity 51 mm X Axis 236 mm Y Axis ±50.8 mm Z Axis 533 mm Rapids on X 12 m/min Rapids on Y 12 m/min Rapids on Z 30.5 m/min Max Speed 5000 rpm with Y axis 8 inches chip conveyor machine is in excellent condition
used
Pig stunning trap type SBF 1400 - For normal pigs up to 150 kg and single anesthesia - Ejection side seen to the left or right of the drive - With automatic cardiac electrode - Stunning trap covered with PE plastic sheets - Made of stainless steel 1.4301 - Pneumatically operated shut-off door prevents the pig from returning - Trap is pneumatically narrowed and the animal is thus fixed - Control by operating personnel by means of pneumatic control/electrical control
used
HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...
used
HAAS VF-1 CNC vertical machining center built in 2014 in the United States is distinguished by its excellent milling precision and accuracy, making it able to stand up to even the most intensive production requirements. This highly efficient and reliable machine features a robust, steel design with compact dimensions that effectively dampens any vibrations and ensures maximum stability of the machining process. Behind the sliding door, there is a large work area with a T-slot table, a 20-position tool magazine and a powerful spindle. All tools taken from the magazine are continuously measured by a measuring probe to prevent damage or tool breakage. The HAAS VF1 vertical milling center is also equipped with an intuitive HAAS CNC control that allows the creation of machining programmes in just a few steps. The VF-1 CNC machining center weighs 3539 kg. Technical specifications of the ...
used
HAAS MINI MILL HE CNC machining center built in the USA in 2001 is distinguished by its incredible milling precision and accuracy, making it ideal for a wide range of applications in any production facility. Made from the highest quality raw materials, the stable, compact design with sliding doors effectively dampens the vibrations generated during machining and provides easy access to the work space. The work space is equipped with a T-slot table, a reliable high-speed spindle and a 10-position tool magazine. To minimise the need for the operator to operate the machine, all machining parameters are programmed in the intuitive HAAS CNC control, which fully automatically executes the machining cycles. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC control: HAAS - work table surface area (L x W): 914 x 305 mm ...
used
HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...
used
This HAAS VF4SS used vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit and has an Ethernet interface. The HAAS 5th axis transmission allows the use of a HAAS rotary table or indexer. The machine disposes of a 1 GB of memory for programs, a 15â COLOR LCD remote monitor, a USB port with memory lock key and a WiFi connection for HAAS control. There are a lot of options fitted on the machine that can be included.
used
Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER
used
Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM
used
Machine Details Stock number 1105-03899 Machine type: CNC lathe - inclined bed machine Make HAAS Type HL 2 Year of construction: 1997 Control type: CNC Control Haas Storage location HAGUENAU FRANCE Country of origin Delivery time: immediately Freight base from location Technical details Turning diameter 250 mm Turning length 520 mm Control Haas Chuck diameter 204 mm Passage 76 mm Swing diameter 420 mm Speed 3400 rpm Power: 407 Nm Power: 15 KW Tool changer 12 SPEED Total power requirement 20 kW Machine weight approx. 4 t Dimensions approx. 3.3 X 2 X 1.9 H m Information CNC HAAS TURRET VDI 12 POSITION LINING DIA 204 MM TAILSTOCK
used
We hereby offer this used Haas Minimill HE vertical machining center from 2008, located in Poland. This vertical machining center is powered by a high-precision Haas control unit, ensuring exceptional accuracy and efficiency. With a generous working area measuring 914 x 305 mm, a rapid 6000 rpm spindle speed, and a robust 6 kW motor, the Haas Minimill HE is your ultimate choice for precision machining and top-tier manufacturing. Technical specifications: Year: 2008 Made in: USA Control unit: Haas X-Axis travel: 406 mm Y-Axis travel: 305 mm Z-Axis travel: 254 mm Table length: 914 mm Table width: 305 mm Spindle speed: 6000 rpm Spindle taper: SK 40 Motor power: 6 kW Tool magazine: 10 pieces Dimensions: Length: 2000 mm Width: 2000 mm Height: 2500 mm Weight: 2200 kg Features: -Enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill versio ...
used
We hereby offer this used Haas VM 2 vertical machining center from 2014, located in The Netherlands. This industrial powerhouse, featuring a cutting-edge Haas control unit, stands as a testament to efficiency and accuracy in metal machining. With a generous working area of 914 x 457 mm, the Haas VM 2 is tailored for diverse machining tasks. The robust 12000 rpm spindle speed, coupled with a formidable 22.4 kW motor power, ensures swift and precise machining operations. Technical specifications: Control unit: Haas X-Axis travel: 762 mm Y-Axis travel: 508 mm Z-Axis travel: 508 mm Rapids on X-Y-Z axis: 18 - 18 - 18 m/min Table length: 914 mm Table width: 457 mm Table load: 1361 kg Spindle nose to table: 610 mm Spindle speed: 12000 rpm Spindle taper: CT40 | BT40 | HSK-A63 Motor power: 22.4 kW Tool changer: 40+1 tools Dimensions: Length: 2600 mm Width: 2700 mm Height: 26 ...
used
This lathe was manufactured in 2014. The HAAS ST-30 features a robust Chuck size of 254 mm, accommodating a maximum part swing of 533 mm and a turning length of up to 826 mm. Equipped with a 12-station turret and a tailstock, it enhances productivity for complex machining tasks. Its feed rates, with rapids on both X and Z axes at 24.0 m/min, coupled with a max spindle speed of 3400 rpm, ensure efficient machining cycles. The HAAS ST-30 the HAAS lathe we have for sale includes additional accessories like a HAAS SERVO BAR 3000 bar feeder and part catcher, greatly streamlining the manufacturing process. Contact us for more information about this machine.
used
Table length: 630 mm Table width: 500 mm Longitudinal X: 762 mm Cross Y: 508 mm Vertical Z: 508 mm Positions ATC: 30 Positions APC: 0 CNC Brand: Haas 5-axis CNC machine (VMC)Haas - UMC-750 MACH-ID 8501 Make: Haas Type: UMC-750 Control: HAAS Year: 2019 Length:3048mm Width:4115mm Height:2870mm Weight:8400kg
used
Flat waffle machine Haas SWAK 72 including arch cooler Manufacturer: HAAS Model: SWAK 72 Machine No.: 11351 Dimensions baking plate: 460 mm x 290 mm Number of baking plates: 72 Weight Net: 17,000 kg Length: 11,705 mm Height machine head: 2,030 mm Height machine body: 1,600 mm Machine is currently still in production and is sold together with an archcooler. Hebenstreit/Haas/Danger
used
HAAS SWAK 40 for waffle chopsticks Manufacturer: HAAS Model: SWAK 40 Factory number: 18812 Waffle blade dimensions: 460 mm x 315 mm 40 baking plates - 120 rods per baking plate Dimensions: Net Weight: 10,200 kg Length: 6.665 mm Height machine head: 2,030 mm Height baking machine: 1,290 mm Gas oven HAAS RAISES DISPUTE DANGER
used
Machine Details Warehouse number 1105-03409 Machine Type Machining Center - Vertical Brand MIKRON - HAAS Type VCE 1000 VF 3 Year of construction 1998 Control type CNC Control Haas Storage location FRANCE Country of origin USA Delivery time immediately Freight base EXW (Incoterms 2010) Technical details x-displacement 1016 mm y-way 508 mm z-way 635 mm Control Haas Table clamping surface 1219 X 457 mm Rapid speed 25 m/min Table load 1000 kg Speed range 7500 1/min Drive power - Milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Information IMMEDIATELY FREE IN GOOD CONDITION UNDER POWER
used
Machine Details Stock number 1105-03828 Machine type machining center - vertical Make HAAS Type VF 4 U Year of construction 2008 Control type CNC Control Haas Storage location HAGUENAU FRANCE Country of origin USA Delivery time immediately, Zwvkf. reserved Freight base from stock, freely loaded on trucks Technical details x-travel 1270 mm y-travel 508 mm z-travel 635 mm Control Haas Table clamping surface 1320 x 500 mm Rapid traverse 20 m/min Table load 800 kg Speed range 8000 1/min Drive power - milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Machine weight ca. 5.5 t Information SHOE MACHINE ENERGIZED INTER FACE FOR 4 AXIS
used
BRAND: HAAS YEAR: 2019 MODEL: VF2 PRODUCTION HOURS: 1434 APPLICATION TYPE: MILLING LOCATION: LATVIA MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: HAAS GINDUMAC ID: LV-MIL-HAA-2019-00001 Technical Information CONTROL UNIT BRAND: HAAS MAIN DRIVE SPINDLE SPEED RANGE: 8100 1/MIN MOVEMENT X-AXIS MOVEMENT: 762 MM Y-AXIS MOVEMENT: 406 MM Z-AXIS MOVEMENT: 508 MM TABLE OUTER LENGTH: 914 MM OUTER WIDTH: 356 MM TOOLS SLOTS IN STORAGE: 20