We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 90 x 90 mm, weight approx.: 5 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (100x125 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 280 x 140 x 140 mm, weight approx.: 15 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 90 x 90 mm, weight approx.: 5 kg
used
Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg
used
Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 330 x 210 x 50 mm, weight approx.: 2 kg
used
Description: High precision collet vice with a jaw width of 160 mm. jaw opening: 160 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 460 x 320 x 170 mm, weight approx.: 29 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: Magnetic force 600 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 260 x 300 x 135 mm, weight approx.: 18 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 100mm, 3500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 165 x 175 x 180 mm, weight approx.: 3 kg
used
Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 210 x 100 mm, weight approx.: 9 kg
used
Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg
used
Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 14 kg
used
Description: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 7 kg
used
Description: Collet Chuck Tool holder SK40-ER16-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (150x200 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 180 x 140 mm, weight approx.: 22 kg