We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Ferromatik Milacron K-TEC250S injection molding machine for PET preform -Model : K-TEC250S -Manufactured year : 2006
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Shot weight max: 123 g - Injection pressure: 1.964 bar - Injection volume: 0 cm? - Screw speed: 400 rpm - Screw L/D ratio: 20 - Nozzle stroke max: 240 mm - Clamping force: 850 kN - Mould height max: 450 mm - Mould height min: 250 mm - Daylight between platens max: 800 mm - Platen size h: 690 mm - Platen size v: 690 mm - Ejector force: 50 kN - Core pullers: 1 x KDE-6-S-B - Oil tank capacity: 290 l - Power: installed max: 29 kW
used
Used machine in good condition. Available for immediate delivery. - Injection pressure: 1.817 bar - Injection volume: 2.290 cm? - Clamping force: 4.500 kN - Power: installed max: 90 + 50,6 kW - Weight: 28.000 kg
used
Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net
used
Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net
used
BRAND: FERROMATIK YEAR: 2000 MODEL: K-TEC400S APPLICATION TYPE: INJECTION MOULDING LOCATION: SPAIN MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: IQT 33 Technical Information CONTROL UNIT BRAND: IQT 33 INJECTION UNIT SCREW DIAMETER: 60 MM INJECTION PRESSURE: 175 DAN/CM2 BAR CLAMPING UNIT CLAMPING FORCE: 4000 KN
used
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2003 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2230/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 110 mm Fuel tank capacity OIL: 190 l www.europnet.eu
used
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2006 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2236/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 32 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 120 mm Fuel tank capacity OIL: 190 l www.europnet.eu
used
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 85 t Year of construction: 2006 Screw diameter: 25/30 mm Spec. Spray pressure: 2253/2289 bar Clamping unit: 850/... Clamping force:: 85 t Lights spar spacing: 420 x 420 mm Aperture travel: 550 mm Max. plate spacing: 750 mm Ejector travel: 300 mm www.europnet.eu
used
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2000 Injection unit: .../111 Screw diameter: 25 mm Spec. Spray pressure: 2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 165 mm Fuel tank capacity OIL: 190 l www.europnet.eu
used
Closing unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 7.5 x 2.2 x 2.7 m
used
Clamping/injection matrix Clamping force [kN] 2750 Mounting plate dimensions (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Shot weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 7,5 x 2,2 x 2,7 m
used
This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.
used
This Ferromatik Milacron K-TEC 200 S Injection moulding machine was made in 2007 in Germany. It has a clamping force of 2000 kN and a screw diameter of 40 mm. The operating hours are at 65545h.
used
This injection moulding machines was manufactured in 2001. The Ferromatic K-Tec 350 S/2F is known for its robust performance and reliability, suited ideally for a variety of injection moulding applications. If youâre considering enhancing your production capabilities, the Ferromatic K-Tec 350 S/2F machine we have for sale could be an excellent fit. Contact us for more information.
used
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.
used
There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: 84,365h, on-site inspection is possible, without accessories.
used
Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12
used
Closing unit Clamping force t: 200 Opening path mm: 750 Holm size mm: 560 x560 Installation height min/max mm: 300 Plate size: 830 x830 Spraying unit Screw diameter mm: 60 Spray weight gr: 540 Spray volume cm3: 636 Spray pressure bar: 1575 Dimensions and weights Dimensions LxWxH m: 6.6 x 1.8 x 2.1 Machine Weight Kg: 10200 Other Battery Euromap12
used
Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour!!, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour!! euro map 12
used
Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930
used
2 - K machine
used
full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) ***clamping unit (extende tie bars +200mm)*** clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) ***injection units **** +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating unit ...
used
included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm