used EBERHARDT optimat

Used dough divider / bread roll press EBERHARDT, Type: Optimat - including 4 casters - Maximum dough layer: up to approx. 3,200 g - technically tested and cleaned - immediately ready for use The machine is in good condition and ready for immediate use. Viewing and test run are possible by arrangement.

Dough press EBERHARDT, type: Optimat size 4 - Size 4 - 30 troughs - Weight range 40 - 135g - incl. 1 new knitting plate The machine is in very good condition and is ready for immediate use. Viewing and test run are possible by arrangement.

Dough dividing and warping machine, bread roll press Model: Optimat Size 3 Simple manual operation Range 30 to 90 grams/piece Dough filler 900 to 2800g Stand machine Dough dividing and warping machine Bread roll press with 3 knitting plates TAS System Floor-standing machine 30 pieces for round and square rolls Removable stainless steel dividing knife Approx. dimensions: 650 x 670 x 1490 mm WxDxH Connection 400 V, 1kW, 16A-CEE plug Used machine cleaned Many more dough dividers in stock!

EBERHARDT round and long-contact machine UNIVERSAL ST and UNIVERSAL, used, refurbished, stainless steel version, with liftomate

With hydraulic pump.

for max. 250 kg dough incl. 2 stainless steel boilers can be retracted Spiral and dough knife made of stainless steel Boiler diameter inside 100 cm Boiler height inside 53 cm digital control 2 speeds slow and fast

Bread Weigher EberhardtManufacture : EberhardtBakery has electrical problems550 KgSee picture for details

Gebrauchtmaschine, effizient. Für weitere Informationen kontaktieren Sie uns bitte.

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW

GEBR, FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE.

for soft doughs

Spiral mixer EBERHARDT, type: Maximat 120 - for 120 kg of dough and approx. 75 kg of flour - Stainless steel boiler - Stainless steel spiral (square spiral) - Dust cover is slightly damaged at the back, but can be opened normally - Rear brake is missing - Condition: The machine runs very smoothly and is technically in very good condition Viewing and test run are possible by arrangement.

Stumping machine Eberhardt STA 5 x 7 Kaiserstüpfler, star buns and button buns with 3 stud boxes Machinery on the move Connection 400V, 16A-CEE plug Machine

Bread roll line Eberhardt Vario-Stars / Primo-Star? Product? Manufacturer: Eberhardt? Type: Vario-Star / Primo-Star? Condition: used, baker condition

Model: Liftomat for the transfer of dough divider into a RuLa movable on a frame Output approx.: 900 pcs/hour Connection 400V, 0.5 kW, 16A-CEE plug Used machine overhauled 6 months warranty With us you will find a large selection of bakery equipment!

There are 2 mixers and 1 round cone mixer available for dough processing. 1) Winkler Konus V round cone mixer, year of manufacture: 2000, round cone diameter: 910mm, output height: 990mm, dimensions X/Y/Z: 1140mm/1140mm/1630mm, weight: approx. 410kg. 2) Kneader Eberhardt. 3) Unknown mixer. On-site inspection is possible.

Description: Well-maintained WEEKE Optimat BHC 655 CNC machining center with 2 machining supports milling on the right / drilling on the left and a REIS robot. Attention: The robot is no longer controlled via the WEEKE software and was built in 1999. Machining support right milling - Main spindle 9 KW with C-axis (speed 1250 - 24000 rpm) - 14-fold tool changer - Milling spindle 3 axis Machining support left drilling - Drill head vertical 32 spindles - Drill head horizontal 6 spindles Y-axis - Drill head horizontal 8 spindles X-axis - Groove saw unit can be swiveled in X-Y direction by 90° - Laser pen for vacuum suction positioning - Consoles 8 pieces and length 1300 mm - Vacuum pumps 2 pieces , REIS RV130 robot cannot be controlled via the WEEKE control and was deactivated in the software! The robot can be driven by hand. Year of construction 1999, machine no. 2436626 Loadi ...

PORO cutting machine with BURNY 2.5 control (with 50 standard macros)+ photo scope (template can be saved), 2 stueck Harris cutting torch cutting range up to 300mm, numerous dues available template table 1250x3000mm, firing table 1500x4500mm. controls shows sporadic

; ready for immediate use

BRAND: WEEKE YEAR: 2003 MODEL: OPTIMAT BHC 280 APPLICATION TYPE: MILLING LOCATION: POLAND MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 5900 MM MEASUREMENTS DEPTH: 3800 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 4000 KG CONTROL UNIT BRAND: WEEKE MOVEMENT X-AXIS MOVEMENT: 3310 MM Y-AXIS MOVEMENT: 1735 MM Z-AXIS MOVEMENT: 220 MM TABLE OUTER LENGTH: 2750 MM OUTER WIDTH: 1050 MM MEDIA MAIN ELECTRONIC CONNECTION: 400V / 50HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BEAM TABLE - 6 PCS - MAGAZINE FOR QUICK TOOL CHANGE: 8 PCS - WORKPIECE THICKNESS: 100 MM - POWER CONNECTION: 17KW QUALITATIVE MACHINE BENEFITS: - THE MACHINE IS WORKING ALL THE TIME, IT'S CONNECTED, YOU CAN TEST IT, TECHNICALLY SERVICED, FULL TECHNICAL DOCUMENTATION.

Travel X / Y / Z 350/250/300 mm Table size 560 x380 mm C-axis 6-fold tool changer Hirschmann clamping system extinguisher

WW: a1 user Brand Homag Machine number MR005603 Serial Number 0-200-21-4058 Maximum thickness of edge banding 3 mm Maximum thickness strips 20 mm Maximum panel thickness 65 mm Throughput 24 /min Pre-milling unit available Year of construction2000

Cabinet press Ligmatech optimat MPH 10 Working width up to 2200 mm Working height up to 1220 mm Working depth up to 600 mm Transport dimensions: 3720x670x3400mm, weight 1300kg

Length: 11,250mm, width: 5250mm, height: 2600mm.

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21