used DURMA pb

Durma PBF 30120 CNC Press Brake Folding length : 3100 mm 120 Ton DT-10 Control Unit Machine is in very good condition

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 800 x 700 x 1200mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 1,5 kW weight of the machine ca.: 0,385 t dimensions of the machine ca.: 930 x 730, x 1400mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1000 x 700 x 1380mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 69600 € : 160 to : 4050 mm : Y1 / Y2 und X Achse : 160 mm/s : 200 mm : 3600 mm : 300 mm : 430 mm : hydraulisch : 10 mm/s : 140 mm/s : 620 mm : 250 mm/s : 858 mm : 104 mm : 15 kW : 4850 mm : 1900 mm : 2610 mm : 10500 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles Manual crowning intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending  ...

: neu : 2023 : 9691 : Mai 2023, Zwischenverkauf : Türkei : 29670 € : 85 mm : 247 mm : 3 : 7.5 kW : 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm : 1200 mm : 1410 mm : 2350 kg 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 8290 : Juni 2023, Zwischenverkau : Türkei : 64380 € : 120 to : 3050 mm : 4 (Y1, Y2, X, R) : 180 mm : 2550 mm : 250 mm : 375 mm : hydraulisch : 878 mm : 104 mm : 150 l : 11 kW : 3750 mm : 1230 mm : 2400 mm : 5900 kg 4 axes (Y1, Y2, X, R axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and g ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 46730 € : 60 to : 2550 mm : Y1 / Y2 und X Achse : 120 mm/s : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 9 mm/s : 70 mm/s : 620 mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles manual, centralized adjustablecrowning table intermediate clamps for upper tool upper tool1 ...

: neu : 9670 : prompt, Zwischenverkauf v : Türkei : 18100 € : 1 : 60 mm : 177 mm : 3 : 3.7 kW : 6 m/min : 70x10 mm / 600 mm, 30x10 : 90x25 mm / 500 mm, 50x5 m : 40x40 mm / 500 mm, 20x20 : Ø. 40 mm / 500 mm, Ø 20 m : Ø 60x2 mm / 600 mm, Ø 20x : 80x40x3 mm : 60x60x4 mm : 50x5 mm / 1.000 mm, 30x4 : 50x5 mm / 500 mm, 30x3 mm : 1160 mm : 1000 mm : 1175 mm : 1194 kg 3 driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel plane and hardened universal rolls lateral rolls adjustablein 3 axes manual/hydr. horizontal and vertical operation for- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 235 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 54500 € : 1 : 120 to : 3050 mm : Y1 / Y2 und X Achse : 120 mm/s : 180 mm : 2550 mm : 250 mm : 375 mm : hydraulisch : 9 mm/s : 77 mm/s : 620 mm : 250 mm/s : 878 mm : 104 mm : 150 l : 11 kW : 3750 mm : 1230 mm : 2400 mm : 5900 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles manual, centralized adjustablecrowning table intermediate clamps for upper tool upper t ...

: neu : 2023 : 8285 : prompt, Zwischenverkauf v : Türkei : 39900 € : 1 : 30 to : 1050 mm : 3 (Y1, Y2, X) : 160 mm : 850 mm : 250 mm : 390 mm : hydraulisch : 10 mm/s : 130 mm/s : 400 mm : 250 mm/s : 835 mm : 104 mm : 75 l : 5.5 kW : 2470 mm : 1250 mm : 2245 mm : 3250 kg Y1, Y2, X - 3 Axis Control Unit - DT 10 Touch screen 2D graphic (Remote Control) Back gauge: motorized &, linear guide &, ballscrew European clamping system European clamping system top tool European style bottom tool holder Support arms with T-Slot Safety side covers (Non CE) World known electrical equipments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2018 : 8309 : prompt, Zwischenverkauf v : Türkei : 31200 € : 1 : 60 to : 2550 mm : Y1 / Y2 / X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3800 mm : 1200 mm : 2350 mm : 5150 kg : 500 mm 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB Manual, centrally adjustable crowning device Laser safety device on the upper beam Fiessler Akas foot pedal Side and rear protec ...

: neu : 2024 : 8319 : Juni 2024, Zwischenverkau : Türkei : 73580 € : 1478.96 € : 200 to : 3050 mm : Y1 / Y2 und X Achse : 210 mm : 2550 mm : 250 mm : 445 mm : hydraulisch : 100 mm/s : 7 mm/s : 73 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 858 mm : 104 mm : 150 l : 15 kW : 3750 mm : 1390 mm : 2500 mm : 8160 kg 4 axes (Y1, Y2, X and R axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC CONTROLLED CROWNING TABLE intermedi ...

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

HESSE DURMA HAP 30120 CNC press brake was built in 2005 in Austria. This specially designed and perfectly optimised machine ensures the highest precision and accuracy in bending, even during the most intensive machining. All of this is due to its extremely sturdy construction, high press force of 120 tonnes and the intuitive ENC 100 control panel, in which all the machining parameters are programmed. During its use, the DURMA HAP 30120 press has undergone regular maintenance. The total weight of the machine is 7260 kg. Technical specifications of the HESSE DURMA HAP 30120 press brake - control panel: ENC 100 - maximum press force: 120 t - maximum workpiece length: 3050 mm - slider stroke: 155 mm - upper tool weight: 40 kg - bottom tool weight: 55 kg - foot switch - side guards - oil tank capacity: 150 l - dimensions (L x W x H): 4150 x 2150 x 2600 mm - weight of machine: 72 ...

Durma HD-FS 3015 Laser Cutting Machine Power : 2000 W 3000 mm x 1500 mm Maintenance has been done by Durma Lantek program Laser hour : 3400 Total working hour : 12400