used DORST tpa

Used Dorst TPA 45

USED DORST TPA 30

Used mechanical Dorst TPA 6 completely refurbished

DORST TPA 15 mechanical press

Mechanical press Dorst TPA5 T completely refurbished

Mechanical Dorst TPA15/3 T completely refurbished

Mechanical Press Dorst TPA50/4S

Mechanical Press Dorst TPA140

Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 6000 kg

Mechanical DORST TPA12/3 completely refurbished

Powder compaction Mechanical press DORST TPA100/3

UNIROLL from DORST Type: SRHV 1 Year of manufacture: 1990 Generally overhould in: 2017 Machine is in very good condition! Including Vacuumpump!

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

Laboratory press with 11 vertically aligned plates (260 mm x 250 mm each), with hydraulics pump and drive 0,5 kW, oil reservoir, outlet tray and drain cock. Fabrics need to be replaced.

Vibratory sieves with interchangeable screen coverings, screen surface: 450 mm x 300 mm, vibrator: 0.3 kW / 2,750 RPM, cast housing with oval opening. Last used as slicker sieving (wet sieving). Several identical siesies available

Vibration sieves with exchangeable screen lining, screening surface: 450 mm x 300 mm, vibrator: 0,3 kW / 2.750 RPM, cast case with oval inlet. Prior use: Ceramic slurry screen (wet screening process). Several identical sieves available.

Used mechanical DORST DK 250 press

Mechanical high-efficiency automatic press Pressing force: max. 150kN Ejection force: 50kN Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min

Dorst tonnage press reader

Sand-lime brick press, hydraulically working, Fabr. Dorstener HDP800 N (left-hand version), with two-sided compression, 190 kW install. Power, control S5, max. pressing force approx. 6,000 kN, max. pellet height 300 mm, for the production of sand-lime brick blocks, fully automatic operation, system is dismantled and stored in a dry place

Used sand-lime brick press, hydraulically working, two-sided compaction, 195 kW install. Power, control S5, max. pressing force approx. 10,000 kN, max. pellet height 650 mm, for the production of sand-lime brick blocks and elements, fully automatic operation, plant still in operation – visit possible

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB type KMER 132 AC P 7.5 kW 1435 rpm -Delivery rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from a Dorstener BBM press brake type: APE80-3050 -Piston diameter: approx. 150 mm -Piston rod: Ø 140 mm -Stroke: 200 mm -Admission piston rod: mm -Number: 2x cylinders available -Price: per piece -Dimensions: 400/380/H825 mm/piece -Weight: 270 kg/piece

Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg