Віконні установки WEINIG Unicontrol 6 NC-Spindeln

деревообробні станки / станки для виробництво вікон / Віконні установки

Gebr. Engelfried oHG
[ профіль дилера ]

пан Florian Engelfried
73432 Aalen
Germany

07361-986... телефон

затверджений
дилер

RESALE член з 2014

список машин (190)

відправити запит

додати до списку

відправити запит

Номер позиції: 165963418	Кількість: 1	Дата: 22.12.2024
Рік випуску: 2010	Місцезнаходження: Oberkochen

Ціна:
Виробник:	WEINIG
Модель:	Unicontrol 6 NC-Spindeln
Тип техніки:	Віконні установки
Опис:	Віконні установки WEINIG Unicontrol 6 NC-Spindeln вживана машина Tenoning spindle: 1 Stk. Number of milling agregates: 5 St. Spindle diameter: 50 mm control: Weinig PC-Nexus # 2745 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm > Adjustment path axially mechanically coupled to crosscut saw > Adjustment path radially pneumatically controlled on/off Length stop NC controlled ------------------------------------------------ > Length 3500 mm > electronic length stop Pos. 3: Tap and slot spindle ------------------------------------------------ > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, infinitely variable, NC controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Pos. 4: 1. Profiling spindle (synchronous and counter-rotation) ------------------------------------------------ > Position: vertical right > Number of tools: 1 piece. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW Pos. 5: 2nd profiling spindle ------------------------------------------------ > Position: vertical right > Number of tools: variable, infinitely variable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, infinitely variable, NC controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (area of synchronous spindle), Rung support bar from above in the area of the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontally at the top ------------------------------------------------ > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed 9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment path 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fittings spindle) ------------------------------------------------ > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Pos. 8: Profile milling unit/grooving unit from below ------------------------------------------------ > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial G41212123 adjustment range 100 mm, 8 positions > Radial adjustment range 100 mm, 8-fold turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 200 mm Other features ------------------------------------------------ > online capable > Electric feed height adjustment including mechanical digital display and manual feed beam clamping > Folding device for tear-free folding > Double parts package > Return conveyor for 1-man operation: slat conveyor > Screen controls > Slanted window device > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control/NEXUS > with Weinig type production program Suction nozzle diameter: ------------------------------------------------ Cro sscut saw 80 mm Slotted spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Fitting spindle 120 mm Grooving device from above 80 mm Grooving device from below 80 mm Option: used tools IV 68/78/92 wood and wood-aluminum The technical characteristics of this machine should meet your expectations do not correspond, please contact us. Our A team with many years of experience will be happy to support you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. seller offer No. resale 1305-2745
Машина в наявності:	Так
Seller-item-No.:	1305-2745

Розповісти про цю машину на Facebook: