Верстати для виробництва дюбелів WEINIG Unipin 200

деревообробні станки / розточувальні верстати, обробні центри / Верстати для виробництва дюбелів

Gebr. Engelfried oHG
[ профіль дилера ]

пан Florian Engelfried
73432 Aalen
Germany

07361-986... телефон

затверджений
дилер

RESALE член з 2014

список машин (190)

відправити запит

додати до списку

відправити запит

Номер позиції: 165061754	Кількість: 1	Дата: 23.12.2024
Рік випуску: 2020	Місцезнаходження: Deutschland

Ціна:
Виробник:	WEINIG
Модель:	Unipin 200
Тип техніки:	Верстати для виробництва дюбелів
Опис:	Верстати для виробництва дюбелів WEINIG Unipin 200 вживана машина Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. Weinig Unipin 200 with parapet gluing ----------------------------------- Dowel driving machine with automatic gluing ! Sold on behalf of a customer: Only around 40 operating hours, no longer required due to product changeover! Manufacturer description: ----------------------------------- Weinig UniPin 200 for driving in dowels on the front after automatic glue application Workpiece clamping pneumatically via hand switch after manual presetting (handwheel). Room conditions ----------------------------------- Temperature: In operation: from 15 to 30°C Out of operation: from 15 to 30°C During storage and before installation: from 5 to 40°C - +/- 5% Relative humidity (without condensation): In operation: from 10 to 70% - +/- 10% Out of operation: from 10 to 70% - +/- 10% During storage and before installation: from 0 to 90% - +/- 5% Altitude In operation: from 0 - 1500 m above sea level Technical data ----------------------------------- Total connected load approx. 1.5 KW (2.0 HP) Full load current: approx. 3 A Pre-fuse: max. 10 A Air consumption/standard: 80 l/min /Blow-out device: 150 l/min Operating pressure: supply 8 bar Operating pressure: UniPin 6 bar Permissible workpiece dimensions: Width: 260 mm Height: 150 mm Dimensions Base area: 1050 x 2150 mm Working height: approx. 1000 mm Permissible dowel dimensions according to DIN 68150 Diameter 8 mm +/- 0.2 mm Length 60 mm +/- 1 mm Dowel feed via vibration conveyor Dowel diameter: 8 mm Filling quantity: 500 pieces Pressing force: max. 1000 N Glue system ----------------------------------- Standard container: 30 liters Glue pressure: up to max. 50 bar For processing B4/D4 glue, one-component according to DIN 68602 / EN 204 suitable. Pump control system made entirely of V4A steel Viscosity at 25°C < 5000 m Pascal Viscosity at 20°C < 4000 m Pascal Standard equipment ----------------------------------- Electronic dowel driving depth monitoring The driving depth of the dowel is indirectly monitored electronically via the end position of the driving cylinder. If the end position of the driving bolt is not reached during driving, the machine is stopped and a message is displayed on the operating terminal. Prerequisites: - Part must lie cleanly on the zero edge. - Dowel must correspond to the preset length Electronic glue monitoring consisting of monitoring the nozzle needle and pressure difference at the glue nozzle. Advantage: Ensures the gluing function The machine is stopped if there is a malfunction in the gluing function and a message is displayed on the operating terminal. The customer is responsible for maintaining the quality of the corner strength of the corner connection. Weinig accepts no liability for compliance with the quality standards of the corner connection Parapet gluing ---------------------------------- Contactless application of glue dots to the front of the workpiece with a pulse valve. The dot size can be set by the nozzle opening time and or by means of the glue pressure. The rows of dots must be transferred from the customer’s computer program. The first and last dots in the respective horizontal line are described. The distances between the glue dots are calculated automatically by the control system. Optionally, a maximum dot distance can be transferred in the data set. The customer provides the industry software. The customer is responsible for any necessary adjustments to the industry software. Counter-hole gluing ---------------------------------- Hand gun for counter-hole gluing including 6.0 m hose line, with solenoid valve for controlling the amount of glue. The pulse time can be set on the operating terminal. The glue gun can also be used in continuous operation. Swivel boom (3.0 m) to hold the hand gun, including hose guide and spring balancer for ergonomic handling Height of the hand gun from the top edge of the floor: 1400 mm Height of the swivel boom from the top edge of the floor: 2500 - 3000 mm Swivel radius: 3000 mm Double part processing for efficient processing of two parts at the same time. Three additional stop cylinders can be selected manually. Workpiece dimensions for double part processing Wood width max. 110 mm Wood height max. 150 mm Machine electrics ----------------------------------- Operating voltage 400/415 volts (voltage range 380 - 420 volts), 50/60 hertz Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. When using frequency-controlled drives in our machines, it is not possible to operate them on residual current devices (RCDs). On the building side, the power supply line to our control cabinet must be earth- and short-circuit-proof (e.g. by G41212123 using single-core NYY cables or a correspondingly mechanically protected installation). The operation of the machine without a residual current device must be reported to the property insurer, accompanying technical measures may be required. See also VDMA position paper: Use of electrical equipment of machines according to DIN EN 60204-1 (VDE 0113-1):2007-06 in fire-hazardous operating facilities according to DIN VDE 0100-482 (VDE 0100-482):2003-06 Announcement of DKE/K 225 and DKE/UK 221.2 The respective country-specific regulations must be observed and complied with Machine operation ----------------------------------- The machine is operated using a computer on the screen. Convenient operator guidance and online help in dialogue. Control Industrial PC with Weinig user interface: - easy networking option for data transfer based on Windows - Best possible operator support through modern, graphical user interface - Remote diagnosis via Internet (VPN) or telephone connection, these must be provided by the client. - Network card (10/100 Megabit/TCP/IP), RJ 45 - Touchscreen Control functions - Position-by-position processing of production orders with graphic display on the touchscreen - Parts tipping (support side) Interface for online connection to the Conturex: The control uses the same data set as the Conturex, in that it contains all dowel positions. When importing the data set into the user interface, all parts are filtered for face dowels and processed in the same production sequence as with the Conturex Interface for external online connection The industry software transfers part information such as dimensions and profile. The dowel positions (X/Y/Z) are also transferred as individual processing. The industry software is provided by the client. The client is responsible for any necessary adjustments to the industry software. (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. seller offer No. resale 1305-6905
Машина в наявності:	Так
Seller-item-No.:	1305-6905

Розповісти про цю машину на Facebook:

2004	WEINIG	Opticut 200 Classic
2008	WEINIG	Hydromat 2000

WEINIG	Weinig Tischeinlage 200 x 60 x	30 EUR	[Feb 2018]
WEINIG	Weinig Tischeinlage 200 x 120	30 EUR	[Feb 2018]
WEINIG	Hydromat Super 30B 200M/MIN	180000 EUR	[Mar 2023]

Верстати для виробництва дюбелів WEINIG Unipin 200

Запит

більше WEINIG Unipin 200 + similar WEINIG-Модель

Ціна: sold WEINIG Unipin 200 + подібні WEINIG-Модель