| Опис: |
Чотиристоронніх поздовжньо-стругальний верстати WEINIG Unimat 500 Fenster
вживана машина
Number of spindles: 5 St.
Working width: 20 - 230 mm
Working
height: 8 - 120 mm
Length of the planing table: 2000 mm
Feed
motor: 4 kW
Feed speed: 5 - 30 m/min.
Control: CNC
Weinig
Unimat 500, window
version
---------------------------------
Machine will be
cleaned and completely checked.
Short
summary:
---------------------------------
5 spindles with
option for glass bead removal
Left and upper spindle
controlled for width and height:
2 axial and 2 radial
CNC-controlled adjustment and positioning
of the spindles in
conjunction with the memory function
CNC-controlled
adjustment and positioning of the feed up/down
in conjunction
with the memory function
Working width (with tool flight
circle 125 mm) 20-230 mm
Working height (with tool flight circle
125 mm) 8-120 mm
Technical manufacturer
description:
----------------------------------
1st
spindle
----------------------------------
First lower
horizontal spindle
Motor with brake 5.5 KW (7.5 HP)
Diameter
40 mm
Speed 6,000 rpm
Tool flight circle 125 - 145
mm
Axially adjustable travel 5 mm
Folding device, including
folding cutter
Table insert hardened in front of 1st lower
spindle
2nd
spindle
---------------------------------
First right vertical
spindle
Motor with brake 7.5 KW (10 HP)
Common motor with left
vertical spindle
Diameter 40 mm
Speed 6,000 rpm
Tool
flight circle 40 mm below table level 100-200 mm
Tool flight
circle 55 mm below table level 100-180 mm
Max. tool diameter
behind stop level 180 mm
Maximum throat depth 35 mm
Axially
adjustable range 60 mm
Right spindle pneumatically controlled
axially (40 mm) via selector switch,
max. saw diameter 200
mm
3rd
spindle
---------------------------------
First left vertical
spindle
Common motor with 1st right vertical spindle
Diameter
40 mm
Speed 6,000 rpm
Tool flight circle 40 mm below table
level 100-200 mm
Tool flight circle 55 mm below table level
100-180 mm
Maximum throat depth 35 mm
Axially adjustable range
60 mm
Axially adjustable range 60 mm
4th
spindle
----------------------------------
First upper
horizontal spindle
Motor with brake 5.5 KW (7.5 HP)
Diameter
40 mm
Speed 6,000 rpm
Tool flight circle 112-200 mm
Tool
flight circle for straight cutter heads max. 180 mm
Maximum throat
depth 35 mm
Axially adjustable range 40 mm
Split pressure shoe
in front of upper spindle, adjustable to tool flight circle
and
swinging away from the tool, spring-loaded.
Pressure
shoe in front of and discharge after the upper spindle with
electronic
digital displays, integrated in the memory function or
the PowerCom.
Upper horizontal spindle pneumatically
controlled axially (40 mm) using a selector switch,
max. saw
diameter 200 mm
Glass bead removal to upper spindle,
pneumatically controlled up/down.
5th
spindle
----------------------------------
Second lower
horizontal spindle
Motor with brake 4 KW (5.5 HP)
Diameter 40
mm
Speed 6,000 rpm
Tool flight circle 112-200 mm
Maximum
throat depth 15 mm
Axially adjustable range 35
mm
Spindles in
general
---------------------------------
All throat spindles
dynamically balanced for high concentricity.
5 quick-release
spindle nuts
Joint control of the right spindle axial, upper
spindle axial and the
glass bead removal pneumatically controlled
up/down.
Feed
system
---------------------------------
Frequency-controlled
feed, infinitely variable with brake 4 KW (5.5 HP)
Feed roller in
front of 1st lower tool pneumatically controlled high-low
Durofer
pointed tooth rollers (Weinig patent) with depth limiter and
self-cleaning
Rubber roller diameter 140 mm, width 15
mm
Rubber roller diameter 140 mm, width 30 mm
Adjustment path
of the feed rollers compared to the left spindle, axial 35
mm
Extension of the pendulum axis compared to the left spindles to
150 mm
Machine
electronics
----------------------------------
Operating
voltage 400 volts (voltage range 380-420 volts), 50
hertz
Electrical design according to DIM VDE 0113, electrical
equipment of industrial machines EN60204, IEC-204-1.
Other
electrical regulations are not taken into account.
Machine
stands, tables and
stops
----------------------------------
Planing table 2m long
(including jointing ruler)
Manual Waxilit pump for removing resin
from the table including 5 liters of Waxilit
A driven rubber
roller in the outfeed table or in front of the universal
spindle
(if available), spring-loaded
Stops after the right
spindle recessed to 35 mm for square strips
Pressure elements
and guides
----------------------------------
Two side
pressure rollers in front of the left spindle, rotating and
spring-loaded
Side pressure roller on the infeed table,
spring-loaded
Pressure rollers from above, spring-loaded
Side
pressure elements after the left spindle, for wood width difference
of
max. 100 mm
Working height min. 35 mm
Machine
operation
----------------------------------
Memory G41212123
function for saving the setting values of profiles. Spindle axes with
electronic double displays
Function:
-Saving the setting
values of the finished profile at the push of a button under
a
profile number
-When the profile number is selected again,
the electronic double displays
show the setting values
-By
manually adjusting the spindle, the displays are brought into
line
-99 memory locations
Basic equipment for the
installation of the CNC-controlled adjustment and
positioning
2 axial CNC-controlled adjustment and positioning
of the spindles in
connection
with the memory function or
PowerCom. For spindle no. 2.3
2 radial CNC-controlled
adjustment and positioning of the spindle
in
connection
with the memory function or PowerCom. For
spindle no. 3,4
CNC-controlled adjustment and positioning of
the feed up/down in
connection with the memory function or
PowerCom.
Lubrication points for the axial spindle
adjustment
Central position of lubrication points on the
front of the machine
Safety and sound
insulation
----------------------------------
Full safety
cover
Easily foldable safety hood with window covers the
entire
working area (feed and spindles) and protects against
mechanical hazards.
When the safety hood is raised, the
spindles and feed are automatically
switched off.
With
the CE version (in the EC internal market), the safety hood cannot be
opened
during automatic operation.
Electromagnetic
locking of the safety hood (the hood can only be opened after
the
spindles have stopped, approx. 15 seconds)
The
machine is delivered with the CE mark
An interior light in
the safety hood
For cutting work, e.g. sawing and multiple
profiling, you need
suitable protective
devices.
Machine without processing
tools
----------------------------------
Price of the above
machine on
request!
----------------------------------
(Technical
information according to the manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2765
|