| Опис: |
Чотиристоронніх поздовжньо-стругальний верстати WEINIG Powermat 1200 EM 100 High-Mech
вживана машина
Number of spindles: 6 St.
Working width: 230 mm
Working
height: 160 mm
Length of the planing table: 1050 mm
Feed
motor: 7 kW
Feed speed: 6-40 m/min.
Weinig Powermat
1200
-------------------------------------------------------------
----------
with infeed automation Weinig wheel magazine EM 100 and
linked
with outfeed automation Weinig High-Mech A 1
The
machine will be completely checked in our warehouse before
delivery!
Detailed
description:
-----------------------------------------------------
------------------
1. Weinig planer and moulder Powermat
1200
-------------------------------------------------------------
----------
Technical
data:
------------------------
Working width 20 - 230 mm (with
tool flight circle 93 - 163 mm)
Working height 10 - 160 mm (with
tool flight circle 93 - 163 mm)
1.
Spindle
-----------------------------
First lower horizontal
spindle
Motor with brake 7.5 KW
Spindle diameter 50
mm
Speed 8,000 rpm
Tool flight circle 125 - 180 mm
In
conjunction with PowerLock 93 - 180 mm
Tool flight circle rebate
cutter 130-160 mm
Axially adjustable range 17 mm
Folding
device
MarathonCoating in front of 1st lower tool
holder
2nd
spindle
------------------------------
First right vertical
spindle
Motor with brake 7.5 KW
Spindle diameter 50
mm
Speed 8,000 rpm
Tool flight circle 93 - 200 mm
Maximum
throat depth 35 mm
Axial adjustment range 80 mm
Radial
adjustment range
Min. tool diameter on stop plane 93 mm
Max.
tool diameter behind stop plane 200 mm
3rd
spindle
-----------------------------
First left vertical
spindle
Motor with brake 7.5 KW
Spindle diameter 50
mm
Speed 8,000 rpm
Tool flight circle 93 - 200 mm
Tool
flight circle for straight cutter heads max. 163 mm
Maximum throat
depth 35 mm
Axially adjustable travel 80 mm
Pressure shoe in
front of left tool holder, including 2 side pressure rollers,
spring-loaded
4th
spindle
------------------------------
First upper horizontal
spindle
Motor with brake 7.5 KW
Spindle diameter 50
mm
Speed 8,000 rpm
Tool flight circle 93 - 200 mm
Tool
flight circle for straight cutter heads max. 163 mm
Maximum throat
depth 35 mm
Axially adjustable travel 40 mm
Split
pressure shoe in front of upper tool holder on tool flight
circle
adjustable and swinging away from the tool,
spring-loaded.
Upper spindle prepared for later installation
of the cassette system
5th
spindle
------------------------------
Second upper horizontal
spindle
Motor with brake 7.5 KW
Spindle diameter 50
mm
Speed 8,000 rpm
Tool flight circle 93 - 200 mm
Tool
flight circle for straight cutter heads max. 163 mm
Maximum throat
depth 35 mm
Axially adjustable travel 40 mm
Split
pressure shoe in front of upper tool holder on tool flight
circle
adjustable and swinging away from the tool,
spring-loaded.
Upper spindle prepared for later installation
of the cassette system
6th
spindle
------------------------------
Second lower horizontal
spindle
Motor with brake 7.5 KW
Spindle diameter 50
mm
Speed 8,000 rpm
Tool flight circle 93 - 225 mm
Maximum
throat depth 15 mm
Axially adjustable travel 40 mm
Radial
adjustable travel
Min. tool diameter to table level 93 mm
Max.
tool diameter 6 mm below table level 225 mm
All spindles with high
concentricity.
Lubrication points for the axial tool holder
movement.
Feed
system
-------------------------------
Electronic feed,
infinitely variable with brake 6-40 m/min., motor 7 kW
Feed roller
in front of 1st lower tool pneumatically controlled
high-low
Durofer pointed tooth rollers with depth limiter and
self-cleaning
Adjustment path of the feed rollers compared
to
left tool holder, axial 35 mm
Shortened roller distance
compared to the right tools
Machine
electronics
------------------------------
Operating voltage
400 volts
(voltage range 380 x 420 volts), 50 Hz
All spindle
motors in IE 2 version
Machine electronics for run-out
mechanization
Control cabinet (with control panel) separate
from
machine, distance control cabinet-machine: 2.5
m
Machine stand, table and
Stops
------------------------------
Surface table 1050 m long
(including jointing ruler)
Joining ruler with sliding
rollers
Automatic lubricant pump for removing resin from the
table.
A driven rubber roller in the outfeed table,
50 mm
wide.
Pressure rollers and
guides
------------------------------
Pressure rollers from
above, spring-loaded
Machine
operation
------------------------------
MemoryPlus
For
saving the setting values of profiles.
Tool holder axes and
pressure elements before and after
the upper tool holder with
electronic double displays.
3 radial CNC-controlled
adjustment and positioning of the spindle
in conjunction with
memory function, for spindle no. 3,4,5
CNC - controlled
adjustment and positioning of the feed
high/low in conjunction
with the memory function
Central position of lubrication
points on the front of the machine
Option: used planing
heads
2. Weinig wheel magazine EM 100 infeed
automation
-------------------------------------------------------
----------------
For continuous feeding of equal and unequal
workpiece lengths.
Mounted on the planing stand of a planer and
moulder.
Magazine consisting of height magazine and feed unit,
frequency-controlled.
The workpieces are manually placed one on
top of the other in the height magazine.
The frequency-controlled
feed unit with a controlled feed wheel from the
side ensures
seamless feeding of the following machine.
Can be folded down
into parking position for manual workpiece
feeding
Performance
data
------------------------------
Feed speed of the planer
and moulder max. 36 m/min
Cycle rate max. 60 cycles/min
Drive
frequency-controlled 0.55 kW
Frequency converter 1.5 kW
Feed
speed 6-70 m/min.
The performance of the magazine is determined by
the length, cross-section and weight of
the
workpieces.
Workpiece dimensions:
Workpiece
length min./max. 350- 3000 mm
Length difference max.
30%
Workpiece width min./max. 20- 260 mm
Workpiece thickness
min./max. 12 - 70 mm
Height G41212123
magazine
------------------------------
Stacking wall on the
right, mounted on the jointing ruler of the moulder.
Stacking wall
on the left can be adjusted to the workpiece width. Can be removed for
work without a magazine.
Filling height max. 350
mm
Filling weight max. 45 kg
For workpiece widths under 80 mm
and filling heights under 350 mm, the max.
workpiece length of
3,000 mm can be exceeded. (Roller conveyor 1.5 m
required)
Feed
system
------------------------------
Feed wheel from the
left, electro-pneumatically radially controlled
Adjustment of the
feed force via potentiometer
CNC-controlled adjustment to wood
width by PowerComPlus
of the planing and moulding
machine
Feed wheel diameter 170 mm
Feed wheel thickness
10 mm
Pneumatic connection 6 bar
Total length: approx.
900 mm
Total width: approx. 800 mm
Total height: approx. 500
mm
3. Weinig High Mech A 1 outfeed
automation
-------------------------------------------------------
-
existing from:
Sliding
unit:
------------------------------
For lowering workpieces
onto the subsequent cross conveyor
Flat belt cross
conveyor
------------------------------
For transverse
transport of processed workpieces
Performance
data:
-----------------------------
The outlet is designed for
a maximum feed speed of the
planing and moulding machine of 60
m/min based on wood lengths
of 1,800 - 6,100 mm. Restrictions
can arise from machining, cross-section,
length of the workpieces
and depend on the type of operation.
Finished wood
data:
------------------------------
Workpiece
dimensions
Length min./max. 1800 - 6100 mm
Length difference
max. 30%
Width min./max. 50 - 230 mm
Thickness min./max. 12 -
100 mm
Cross section max. 100 cm2
Single part weight max. 30
kg
Wood moisture 10-15%
1st position slide
unit
------------------------------
For lowering workpieces
onto the following cross conveyor
Total length 7,800
mm
Width of the set-down flap 270 mm
Inlet height 825
mm
Outlet height 650 mm
Cycle rate max. 28
cycles/min
2nd position flat belt cross
conveyor
------------------------------
For transverse
transport of processed workpieces
Drive motor 0.75
kW
Feed speed approx. 18 m/min
Tracks 5 pcs.
Conveyor path
2,100 mm
Height increasing to 1,000 mm
Collecting bracket, 400
mm support
Electrically linked to moulding
machines
Space requirement
High-Mech A 1
Conveyor
length x width approx. 2500 x 8000 mm
(technical data
according to manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2766
|