| Опис: |
Глибокий свердло для отворів SIG B 30 /16
вживана машина
core drilling diameter max.: 50 mm
bore depth: 2000 mm
swing
diameter: mm
drilling capacity diameter max.: 110 mm
total
power requirement: 30 kW
weight of the machine ca.: 10
t
Drilling Ø, approx. 2 - 50 mm
Boring Ø,
approx. 100 mm
Drilling depth, max. (see stroke / mounting
length) 1,600 - 2,000 mm
Stroke of drilling slide,
approx. 4,000 mm
Distance between the two spindle
heads 5,000 mm
Height of centres above guideways 350 /
450 mm
Drilling feed of drilling slide, infinitely
variable 20 - 200 mm/min
Quick feed of drilling
slide 2,500 mm/min
Spindle speeds via belt disks 260 - 650 / 650
- 1,625 rpm
Workspindle drive 24 kW
Drive of coolant
pumps 1 x 7.5/15 kW and 1 x 15/28 kW
Total electrical load,
approx. 60 kW - 380 V - 50 Hz
Total length of machine /
guideways 7,500 / 5,000 mm
Weight,
approx. 10,000 kg
Accessories / Special Features
Machine consists of the following elements:
Main
spindle on the left-hand side, followed by the coolant oil supply
device. Table group, driven by ball screw
spindle.
Coolant oil supply device with elevated height of centres. At the end
is a headstock, Type B 16, with
drive motor approx. 7.5
kW, n = 900/2400 and 2400/6000. Large coolant device with filter
unit. Large selection
of accessories and drilling tools
with Ø up to 100 mm.
Machine is suitable for working with a
rotating workpiece together with a fixed drilling tool (ELB and BTA
Process), as well as for a fixed workpiece and a rotating drilling
tool. It can work with internal oil feed (Elb) or with external oil
feed (BTA).
Complete oil coolant unit with tank and filter and
two SIG high pressure pumps. Number of litres can be set: 17 / 40 /
120 or 220 / 500 litres per minute. Capacity approx. 2,500
l.
Feed of main slide is via ball screw spindle and infinitely
variable DC motor. Mounted on the H41241166 main slide is at present
a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and
suitable for holding cubic and cylindrical workpieces. Electric
control via cam rail, approx. 2,500 mm long. End switch for quick
feed, feed and return.
2 closed 3-point steady rests.
FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315
mm.
Modernized control panel with speed display, feed setting and
display, display for kW, switch for feed, quick feed, right/left,
etc.
2 separate switch cabinets, separate coolant oil display
device, bushes, reducers, clamping helps and lots of other
accessories.
This is a very valuable machine because of all
the accessories!
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1049-382093
|