degree: 1200
length: 2250 mm
width: 1450 mm
depth: 2000
mm
pan capacity: 320 Kg / Al
capacity: 840 u/F
total power
requirement: 102 kW
weight of the machine ca.: 3,5
t
dimensions of the machine ca.: m
NEW GOODS with
manufacturer guarantee
ORIGINAL PACKAGED
Melting
electric tilting furnace
PTS 970 /12
Technical
parameters
Mark: PTS 970/12
Max. temperature: 1200
°C
Recommended range of operating temperatures: 650-1000 °C (in
crucible)
Capacity: 840 kg of Al
Crucible type Noltina or
equivalent: TBNS 800
Capacity of crucible: 320 l
External
dimensions (w x h x d): 2250 x 2450 x 2000 mm
Melting output: 250
kg of Al alloys/h
Heating power input: 102 kW
Weight: 3500
kg
Protection: 200/3
Voltage: 3/N/PE 400/230 V AC 50
Hz
Protection can vary depending on the accessories chosen (at
additional cost).
The melting output values specified in the table
are the maximum values. They
are achievable if the conditions
mentionedbelow are complied with.
Approximately 80 % of the
maximum value of the melting output is achieved
during
actualoperation.
Description
The furnace is used as a melting
device with the possibility of tilting and
pouring the melt into
the transport pan or transport holding furnace for
subsequent
processing at temperatures up to 1200 °C (in the furnace chamber,
approximately 1100 °C in a crucible – these values are
guaranteed only when
using unworn Noltina crucible of the
appropriate size).
Standard design of
furnace
•Crucible
•Hydraulic furnace tilting
•Ht40T
controller
•Limit unit
•Protective collar of
crucible
•Manual lid
•Emergency drain at the bottom of the
furnace, with flap
•S” type limiting and controlling
thermocouple
•3 ammeters for checking the status of the heating
elements
•Switching of the heaters using
contactors
•Residual current protector
•Legs to facilitate
handling by a forklift at volumes of 400 l or more
•Connection
between the furnace and switchboard, within a metal hose with a
plasticprotector, length of up to 5 m
•Wall
switchboard
•Hydraulic I5162056 aggregate is on the right side
of the furnace, the hand lever
control is on the rightside of the
furnace
Benefits:
• Furnace chamber with a
long-term service life, mechanical durability and
resistance to
corrosion
• Simple replacement of the spirals if they become
damaged
• Simple replacement of the crucible by dismounting
the top furnace cover
• Use of the lid reduces operational
costs
• Robust, durable design for heavy-duty
operations
• The chamber is provided with an emergency drain
with an insulated flap so
that it is protected against damage in
the event of melt leakage from the
crucible
• Easy to
install, easy to control
• Custom adjustments
•
24-month warranty
• Mechanical durability
• High
melting output
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
