Пакетувальний преси FZ-RECYCLING GMBH & CO. KG

машини та установки для утилізації і переробки відходів / преси для переробки / Пакетувальний преси

Виробник: FZ-Recycling GmbH & Co. KG

Модель:

Тип техніки: Пакетувальний преси

Номер позиції: 166147899

Кількість: 1

Дата: 02.01.2025

Рік випуску: 2022

Місцезнаходження: Land-DE Німеччина DE

Ціна:


Машина в наявності:Так

Seller-item-No.:EPS_press_FZR_320_yoc_2022

Technical data on the EPS (Polystyrene) press:
Manufacturer FZ-Recycling GmbH & Co. KG, Germany
Type FZR 320
Year of construction 12/2022
Drive power shredder 4 kW
Drive power of compactor screw 7.5 kW
Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW
Total connected load 12.6 kW
Current consumption 32 A
Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material)
Block weight after compaction approx. 300kg/m³ (depending on material)
Block dimensions 320 x 320 mm, variable length
Throughput approx. 100 kg/hour, depending on material
Achievable density approx. 250 - 300 kg/m³
The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped.
Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h)
Transport weight press 1,325 kg

Condition of the baler:
The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press O5151246 is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug.

Scope of delivery for the baler:
1 piece EPS press, ready for connection and use

Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Розповісти про цю машину на Facebook:

Запит

Ви дилер техніки?

Будь ласка, виберіть опціонально

Відправити запит пошуку?

Копію для вас?

Save input data

Technical data on the EPS (Polystyrene) press:
Manufacturer FZ-Recycling GmbH & Co. KG, Germany
Type FZR 320
Year of construction 12/2022
Drive power shredder 4 kW
Drive power of compactor screw 7.5 kW
Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW
Total connected load 12.6 kW
Current consumption 32 A
Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material)
Block weight after compaction approx. 300kg/m³ (depending on material)
Block dimensions 320 x 320 mm, variable length
Throughput approx. 100 kg/hour, depending on material
Achievable density approx. 250 - 300 kg/m³
The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped.
Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h)
Transport weight press 1,325 kg

Condition of the baler:
The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press O5151246 is mobile and can be used O5151246 directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug.

Scope of delivery for the baler:
1 piece EPS press, ready for connection and use

Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
seller offer No. resale EPS_press_FZR_320_yoc_2022
Розповісти про цю машину на Facebook:
затверджений
дилер

Verkäufer

logo dealer

OBM Recycling Machinery B.V.

пан Jörg Andresen
9679 Scheemda
Netherlands

RESALE член з 2018

  • список машин (41)

Запит

Ви дилер техніки?

Будь ласка, виберіть опціонально

Відправити запит пошуку?

(всім дилерам для такої машини)

Копію для вас?

(копія вашого запиту буде відправлена на вашу адресу електронної пошти)

Save input data

(Save input data for further inquiries)