Гідравлічний С-подібний прес 150 тонн Подробиці дивіться на фотографіях.  ...

• додаткова інформація

ДЕРА ПРОДАЖ, RUSKI CHN 36/45 ДВИГУН 6CYL CRANKSAFT, ВКЛАДИШ, ПОРШНЯ, КРИШКА, БЛОК, НАСОС БУДЬ-ЯКІ ЧАСТИНИ Бробговорення Хакан КУСКУ + 905323642509 info@kscege  ...

• додаткова інформація

sheet width: 3100 mm plate thickness: 6 mm thickness at Niro-steel: 4,5 mm daylight upper clamping: 100 mm Bending angle: 0 - 135 ° total power requirement: 7,5 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 4,5 x 1,72 x 2 m Electric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mm Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lippert belt conveyor inclined belt GF 3100-650-500 RA1494 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3100 mm (upper straight 470mm + inclined belt 2630mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying sp ...

Виробник: Roboter Kuka Quantec-2 KR 120-3100-2/FLR, Тип: Quantec-2 KR 120-3100-2/FLR, Рік випуску: 2021, Управління: Kuka Smart Pad/KukaVisual 6.0, Achsanzahl: 6, Bodenmontage: є, Saugsystem: Vakuum, Рік :2021 ...

• додаткова інформація

Гідравлічні ножиці гільйотини з ЧПУ ERMAK HVR 3100 x 13, побудовані в Туреччині в 2008 році, призначені для різання заготовок, виготовлених, серед іншого, з м'якої сталі або нержавіючої сталі. Металевий лист з максимальною довжиною 3100 мм і максимальною товщиною 8 мм (звичайна сталь) або 13 мм (нержавіюча сталь), утримується під час механічної обробки 14 гідравлічними затискачами. Кут нахилу ріж ...

sheet width: 3100 mm plate thickness: 6,0 mm thickness at Niro-steel: 4,0 mm down holder: 14 Stück no. of strokes: 20 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° control: CYBELEC CybTouch weight: 5500 kg range L-W-H: 4.000 x 2.100 x 1.640 mm total power requirement: 11,0 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4100 x 2200 x 2190 mm -------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adju ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting  ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3.100 mm down holder: 14 Stück no. of strokes: 16 - 24 Hub/min oil volume: 150 ltr. cutting angle: 0,5 - 1,5 ° thickness at Niro-steel: 4,0 mm column arm: 350 mm engine output: 11,0 kW weight of the machine ca.: 7.060 kg range L-W-H: 4,1 x 2,2 x 2,19 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.