TOP
Seller

Багатоступінчасті свердлильні верстати DMG MORI NZX-S1500

металообробні станки / інші станки для обробки металів

DMG MORI Used Machines GmbH
[ профіль дилера ]

пані Kerstin Bauer
82538 Geretsried
Germany

+49 8171 ... телефон

затверджений
дилер

RESALE член з 2019

список машин (189)

відправити запит

додати до списку

відправити запит

Номер позиції: 156898370	Кількість: 1	Дата: 08.11.2024
Місцезнаходження: Німеччина

Ціна:

Виробник:

DMG MORI

Модель:

NZX-S1500

Тип техніки:

Багатоступінчасті свердлильні верстати

Опис:

Багатоступінчасті свердлильні верстати DMG MORI NZX-S1500

General
2-Turret Shaft Lathe; Control: Control F32iB
Characteristics
Max machining diameter	120 mm
Dimensions (L x W x H)	1,65 x 1,67 x 1,5 m
Drive power main spindle	5,5/3,7/3,7 kW
Rapid feed X / Z	20 / 30 m/min
Movements X / Z	60 / 580 mm
Lower Turret	6 Positions
Rapid feed X / Z	20 / 30 m/min
Movements X / Z	60 / 580 mm
Upper Turret	6 Positions
Speed max.	-3500 rpm
Max. Turning Length	535 mm
Weight approx.	3000 Kg




Tailstock spindle travel check (4 positions)	Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.
Foot switch for tailstock	Foot switch for tailstock The tailstock spindle is moved in and out with a foot switch.


Coolant gun	Coolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressing its trigger starts the coolant discharge. The coolant pump automatically stops
Air blow for tool tip	Air Blow for Tool Tip Air is blown to the tool tip for removing chips adhering to it. The air blow to the tool tip is effective in removing debris during in-machine measurement or removing chips during dry machining. For this specification, the air blow
Interface for Air gun	Interface for Air Gun This is an I/F for mounting the air gun. The piping up to the coupler is provided. Parts from the coupler onward (air gun, coiling tube) D41152871 are not included. Please prepare them separately. It is used for cleaning at replacement of



Dry anchor	Dry anchor Anchors fitted on the bed to prevent the machine from moving because of vibrations when starting up or because of slight earthquakes. They control vibration in all directions as far as possible.
Raised machine height 100 mm	Raised machine height 100 mm The machine is raised 100 mm using the special leveling blocks (the chip conveyor is raised the same amount as well).
(X)Chuck, tailstock barrier	Chuck, tailstock barrier
Program restart	The program restart function allows the program to be restarted from a desired block if a tool is broken or for restarting the suspended operation after holidays. To restart the program, specify the sequence number of the block or the block number to be r
5 external M-codes	5 external M-codes This function contributes and expands the existing M-codes. To add this, let the M-codes output pass through the relay and dispose terminal block connected to the A-contact on the MTX substrate.(Terminal 1 and 2) We will prepare 5 in

seller offer No. resale 071453

Seller-item-No.:

071453

Розповісти про цю машину на Facebook:

Багатоступінчасті свердлильні верстати DMG MORI NZX-S1500

Запит

більше DMG MORI NZX-S1500 + similar DMG MORI-Модель