| Dynamic package DMU 40 eVo
linear |
Dynamic package for DMU 40 eVo linear
linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z
80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s²
Active chiller for main spindle, lineardrives and table |
| NC swivel rotary table |
NC rotary table with swivel axis, incl. cooling of
the table |
|
Type of Measuring system Direct measuring
system |
| Clamping pneumatic, one circuit |
Clamping pneumatics,1 clamping circuit for
standard machine (not for option package mill turn) |
|
Rotation Speed 5. Axis 60 rpm |
|
5. Axes (swivelling range) -5/+110 degree |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Rotation speed max.4. Axis 60 rpm |
|
Distance between T-Slots 63 mm |
|
Number of Slots 5 |
|
Slot width 14 mm |
|
Maximum load (table centre) 250 Kg |
|
Centre bore 30 mm |
|
Table surface 450 x 400 mm |
| Version Rotary joint, 4 channels, outside
of table |
Rotary joint connections on the face side for
pneumatics or hydraulics in rotary table with swivel axis, 4 channels
version Media connection on the face side of the table (not for option
FD technology or torque table) |
| Spindle speed 20.000 rpm, HSK-A63 |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Chain-type tool magazine 60 pockets |
Tool magazine with 60 positions, chain type with
double gripper (differently from standard) |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| Laser tool measuring DIGILOG,
swiveling |
Laser tool measuring BLUM DIGILOG measuring of
tool length and diameter, automatically turn away of the measuring
unit under table level including Calibration tool |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Internal coolant supply 40 bar /
600l |
Internal coolant supply (ICS) with paper type
filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon
air purge for linear measuring system, bed flushing double cartridge
filter 50µm for internal coolant |
| Oil and emulsion mist separator |
Oil and emulsion mist separator mechanical |
| Extended swarf flushing |
Extended swarf flushing Additional flushing of the
working area door left hand side, y axis and right cabin wall volume
of the flushing adjustable manual (only in combination with internal
coolant) |
| Double cartridge filter,25 µm |
Double cartridge filter, Finesse of filtration 25
µm (only in combination with internal coolant) |
| Automation Interface WH CELL /
Robo2Go |
Automation interface WH CELL / WH FLEX / Robo2Go
Interface (Profibus) via M65 Automatic loading door Working table with
4-channel rotary joint Only in combination with an additional clamping
method option! Robo2Go available for D41152871 DMU 40/60 eVo For
Robo2Go |
| Package tropical climate(dynamic
vers.) |
Package for tropical climate for dynamic version
for ambient temperature max.50°Celsius: includes blocking air for
linear measuring system, temperature control of hydraulic oil |
| Air blast through spindle centre |
Air blast through spindle centre selection with M
function maintained air (1 Drop Oil per 8min) (in combination with ICS
possible) |
| Exhibition design eVo |
Exhibition design DMU eVo chiller of electrical
cabinet painted in electrical cabinet color; lighting of tool
magazine; DMG-MORI set of labels; door media supply; paper version of
electrical plan |
| Safety glass at operators door |
Laminated safety glass at the operators door,
side glass polycarbonate preferably for combination with automation
cabin |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Turning/Milling cycle |
Turning / milling cycle For the machining of
internal and external diameter using spindle orientation |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/surface/speed |
| DXF Reader |
DXF-Raeder: Open CAD files Extracting of counters
and drilling positions directly in G-code and ShopMill programs
Supported elements: drilling positions and contours |
|
|
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
SK-001-Control of clamping pressure via
proportional valve SK002-Pneumatic unlocking tool changer
SK003-Clamping point KSP3 160 with top jaws SK004-1 Set of standard
mounting elements |