металообробні станки / фрезерні станки / Фрезерні верстати з круглим столом
Виробник: DMG MORI
Модель:DMC 80 FD duoBLOCK
Тип техніки: Фрезерні верстати з круглим столом
Номер позиції: 166192507
Кількість: 1
Дата: 07.01.2025
Місцезнаходження:
Німеччина
Ціна:
Seller-item-No.:130085
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| General | |
| Universal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate | |
| Tool changer | |
| Application | Universal |
| Type of magazine | Wheel |
| Tool changer plane | horizontal |
| Type of gripper | Double gripper |
| Number of tools | 123 |
| Working area 1 | |
| Longitudinal | 800 mm |
| Cross | 1050 mm |
| Vertical | 850 mm |
| Uni milling head with controlled B axis HSK-A 63 | Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining |
| NC mill-turn table with pallet | NC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 pallets |
| Type of Measuring system Direct measuring system | |
| Table surface Ø 800 x 630 mm | |
| Centre bore 50 mm | |
| Maximum load (table centre) 1400 Kg | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Clamping hydraulics M/T | Clamping hydraulics for mill-turn table and setup station for hydraulic clamping devices / chucks incl. pallet preparation basic machine |
| Prod. package 40 bar/23 l/min | Coolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump |
| Chip removal | 2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in |
| Integrated motor spindle speedMASTER® | Drive power (100% DC) 25 kW |
| Drive power (40% DC) 35 kW | |
| Torque (100% DC) 86 Nm | |
| Torque (40% DC) 130 Nm | |
| Speed range - 15000 rpm | |
| Spindle taper HSK-A 63 | |
| Taper cleaning brushes | Taper cleaning unit with rotating brushes for spindle taper HSK |
| Tool magazine, wheel, 123 pockets HSK-A 63 | Tool magazine wheel magazine (2 wheels) with 123 tool pockets HSK-A 63 |
| Operation panel for loading station tool magazine | Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit |
| Infrared measuring probe Heidenhain | Infrared measuring probe Type Heidenhain TS 460 Tool taper HSK-A 63 |
| Tool measuring in machining area Blum Laser FD | Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of measuring device in a protective housing, Laser-system for milling tools, 3D touch-probe for turning D5152871 tools |
| Tool breakage control mechanical | Tool breakage control mechanical version |
| 3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
| Sensor package i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| rotoLENS - milling head camera | rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function |
| rotoLENS - working envelope camera | rotoLENS - Camera with rotating lens integrated in the machine roof Visualization via CELOS (delayed) and HDMI (real time) Digital zoom and recording function |
| proTIME | proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state |
| Tool identification (TDS) | Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip |
| Control cabinet lighting with power outlet | Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after completed check list |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 55 H duoBLOCK | ||
| DMG MORI | DMC 65 H duoBLOCK | ||
| DMG MORI | DMC 65 H duoBLOCK | ||
| DMG MORI | DMU 80 P duoBLOCK | ||
| DMG MORI | DMC 65 H MONOBLOCK | ||
| DMG MORI | DMC 60 H linear |
| 2011 | DMG MORI | DMC 635 | 30000 EUR | [May 2021] |
| 2013 | DMG MORI | DMC 1035 V ecoline | 26500 EUR | [Nov 2022] |
| 2011 | DMG MORI | DMC 635 Ecoline | 27000 EUR | [Oct 2021] |
| 2017 | DMG MORI | DMC 1150 V | 113640 EUR | [Sep 2022] |
| 2017 | DMG MORI | DMC 1150 | 165000 EUR | [Oct 2019] |
| 2011 | DMG MORI | DMC 635 V Ecolin | 36000 EUR | [Nov 2022] |
