металообробні станки / фрезерні станки / Горизонтальні консольно-фрезерні верстати
Виробник: DMG MORI
Модель:DMC 65 H duoBLOCK
Тип техніки: Горизонтальні консольно-фрезерні верстати
Номер позиції: 166192450
Кількість: 1
Дата: 07.01.2025
Місцезнаходження:
Німеччина
Ціна:
Seller-item-No.:064042
| General | |
| Horizontal Machining Centre; Control: 3D Control Siemens 840D solutionline | |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| Working area 1 | |
| Longitudinal | 700 mm |
| Cross | 700 mm |
| Vertical | 700 mm |
| Miscellaneous | |
| Clamping System | HSK-A 63 |
| Cabine | Full protection cabin |
| Main drive | Drive power (100% DC) 20 kW |
| Drive power (40% DC) 20 kW | |
| Speed range - 12000 rpm | |
| Spindle taper HSK-A 63 | |
| NC rotary table with pallet changer | Type of Measuring system Direct measuring system |
| Table surface 500 x 500 mm | |
| Centre bore 50 mm | |
| Maximum load (table centre) 600 Kg | |
| Slot width 14 mm | |
| Spindle taper HSK-A 63 | Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine) |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Rotation speed max.4. Axis 40 rpm | |
| Distance between T-Slots 100 mm | |
| Number of Slots 5 | |
| Tool magazine, chain vert., 80 pockets | Tool magazine Vertical chain magazine with 80 tool pockets |
| Production package 40 bar/23 l/min, 980 l tank | Production package Coolant unit 980 l / 259 gallon, paper band filter Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) roof chip rinsing 300 l/min / 80 gallon/min (theoretical pump performance) D5152871 through jets with n |
| Direct measuring system X,Y,Z | Direct measuring system X-, Y-, Z-axis, Positional uncertainty: P=0.006 mm / 0.00024 in (VDI/DGQ 3441) |
| Tool identification (TDS) | Tool identification (Tool Dialogue System TDS) Reading/Writing manually, without with a chip of Balluff BIS C for spindle |
| Spray pistol with pump | Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance) |
| Oil and emulsion mist separator | Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h |
| Operation panel for loading station tool magazine | Control panel Siemens for loading station Tool magazine with TFT screen 8 Softkeys, alpha-numeric keyboard No parallel operation with CNC control. |
| Special equipment | Production package such as module P-K0346, but with 80bar and vario valve Torque support bolt solution with 3-point system Automatic set-up station door 4/7 clamping hydraulics for work table and Set-up station for the connection of hydraulic Clamping |
| Special equipment | 3 air lines at the setup station must be independent from each other with valve (via switch on the control bar) can be switched with the setup station door open can. One switch per line (open / close) Additional key switch for Selection of the clamping p |
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 125 U duoBLOCK | ||
| DMG MORI | DMC 55 H duoBLOCK | ||
| DMG MORI | DMC 80 FD duoBLOCK | ||
| DMG MORI | DMC 65 H duoBLOCK | ||
| DMG MORI | DMU 80 P duoBLOCK | ||
| DMG MORI | DMC 65 H MONOBLOCK | ||
| DMG MORI | DMC 60 H linear |
| 2011 | DMG MORI | DMC 635 | 30000 EUR | [May 2021] |
| 2013 | DMG MORI | DMC 1035 V ecoline | 26500 EUR | [Nov 2022] |
| 2011 | DMG MORI | DMC 635 Ecoline | 27000 EUR | [Oct 2021] |
| 2017 | DMG MORI | DMC 1150 V | 113640 EUR | [Sep 2022] |
| 2017 | DMG MORI | DMC 1150 | 165000 EUR | [Oct 2019] |
| 2011 | DMG MORI | DMC 635 V Ecolin | 36000 EUR | [Nov 2022] |
