| 5-axis simultaneus machining |
5-axis simultaneous machining |
| Counter spindle centre |
Complete machining of shaft components without
process interruptions on turn/mill centers with counter spindle. Cycle
for automatic exchange of a center into the counter spindle and back
into the tool magazine. The centre is not included in the
delivery |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Hollow clamping cylinder dia. 77 mm |
Hydraulic hollow clamping attachment dia. 77 mm
(3.03 inch) Pullforce 72 kN (16.183 lbf) at pmax 45 bar (653 psi) Tie
rod not standard GILDEMEISTER Not suitable with clamping device with
bar passage smaller than dia. 75 mm (2.95 inch) For CTX Beta 1250
(2 |
| Chuck rinsing device, mainspindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, subspindle |
Chuck rinsing device for subspindle, outside |
| Clamping with balanced pressure,
sub-sp. |
Balanced pressure clamping device for
sub-spindle |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Counter spindle ISM 76 |
Counter spindle as integrated spindle motor ISM 76
synchronous (instead of tailstock) - Drive power 25/32 kW
(S1-100%d.c. / S3-40%d.c.) - Torque 280/360 Nm (S1-100%d.c. /
S3-40%d.c.) - Speed range 0-5000 rpm - Partial hollow clamping
(hydraulic) - D |
| Extension of the discharge chute about
300 mm |
Extension of the discharge chute at the chip
conveyor about 300 mm |
| BFU 8/20 bar, 600 l |
Compact coolant system, consisting of: - coolant
tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd:
8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min
(theoretical pump performance) (116.psi/5.2 gal/min and 290
psi/6 |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| Mechanical oil mist extractor
1100m³/h |
Mechanical oil mist extractor, 1100 m³/h (38,830
ft³/h) with dirtiness indicator, class of filtration H13 |
| Chain magazine for 48 tools HSK-A 63 |
Tool magazine, 48-fold chain magazine with double
gripper with cam drive instead of tool disc magazine, tool reception
HSK-63A DIN 69893. only with Siemens control. Surcharge |
| Automatic actuation of sliding cover,
electrical |
Automatic actuation of sliding cover, electrical.
(Remark: option B-L7250, automatic loading hatch is not possible) |
| Workpiece touch probe TC62, BLUM |
Workpiece touch probe TC 62, BLUM - Dimensions
basic body (excl. stylus length): L= 62 mm (2.4 in), Ø= 40 mm
(1.5 in) - Interchangeable in turning/milling spindle - Sending
and receiving unit with probe tip - Incl. cycle package
Quickstart |
| Electrical interface for Robo2Go |
Electrical interface standard Profibus for Robo2Go
(Only at Siemens control) Incl. - Additional compressed air supply -
Additional Ethernet interface - Power supply of the robot by the
machine - User interface integrated into CELOS (with CELOS 3
as |
| 3-jaw chuck, BBD 250-78, make SMW |
3-jaw power clamping chuck with through-hole, type
BBD 250/78, make SMW-Autoblok incl. connecting D41152871
elements |
| 3-jaw chuck, BBD 250-78, make SMW |
3-jaw power clamping chuck with through-hole, type
BBD 250/78, make SMW, incl. connecting elements |
| Window rinsing of the security
window |
Window cleaning of the security window of the
working area door by compressed air (Remark: The employment of coolant
can limited the view on the workpiece at machining) |
| Package for increased ambient
temperature |
Package for increased ambient temperature
consisting of cooling system for control cabinet (until 40º) |
| Special equipment |
Tool breakage monitoring Easy Tool Monitor 2.0 -
Simplified holistic view of the actual state of the tools in side
screen of CELOS - Setting of one monitoring limit for each tool
selected from the tool list - Easy teaching function to measure
m |
| Special equipment |
RMS-Sensor |
| Special equipment |
SPANNTOP nova Kombi pull-back collet chuck for
quick change clamping heads, size 65, make Hainbuch, incl. connection
element |
| Module 35 kg |
Module 35 kg - Max. load of the robot 35 kg
(77.16 lbs) - Triangular gripper base with outlet lance Note:
Indicated is the maximum load of the robot in the tool center point.
The maximum workpiece weight is depending on the grippers and the
workpiece le |
| Robo2Go |
Flexible workpiece loading and unloading system
with a six-axis-industrial-robot - Replaceable workpiece storage
incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) -
Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the
tray |
| 3-jaw gripper |
3-jaw gripper for: - Chuck parts - Inside and
outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module:
- Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg &
35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in)
- |
| 3-jaw gripper |
3-jaw gripper for: - Chuck parts - Inside and
outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module:
- Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg &
35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in)
- |
| Pressure piece |
Elastic pressure piece for compensation angle
errors at sawing sections |
| Pressure adjustment |
Pressure adjustment - Manual adjustment of
gripping pressure for each gripper(A and B) individually in the
range of 2.5 - 6 bar - Mounted on robot arm |
| Special equipment |
BL7278 Customer-specific gripper fingers including
design |
| Special equipment |
Vision comfort function - Automatic 3D camera
recognition of the workpieces - For cylindrical chuck parts - Fast
feed and discharge of raw and finished parts by means of lift
trucks - Incl. safety fence with laser barriers Note for Robo2Go
Turnin |