Фрезерні верстати з рухомою стійкою PARPAS SHARK One

металообробні станки / фрезерні станки / Фрезерні верстати з рухомою стійкою

FLECKENSTEIN Werkzeugmaschinen GmbH
[ профіль дилера ]

пан Bj?rn Fleckenstein
63831 Wiesen
Germany

+49-60969... телефон

затверджений
дилер

RESALE член з 2022

список машин (30)

відправити запит

додати до списку

відправити запит

Номер позиції: 163794456	Кількість: 1	Дата: 27.12.2024
Рік випуску: 2016	Місцезнаходження: Lager Kleinostheim

Ціна:
Виробник:	PARPAS
Модель:	SHARK One
Тип техніки:	Фрезерні верстати з рухомою стійкою
Опис:	Фрезерні верстати з рухомою стійкою PARPAS SHARK One вживана машина x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074 mm control: HEIDENHAIN iTNC 530 HSCI clamping table: - surface area: 4.000 x 1.000 mm Thread bore with fitting: - Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000 mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis: 10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92 with power on: - Torque-Motors for 5-axis-simultaneos processing: - capacity at 100% load: 29 kW Speed stepless: 2- 30.000 max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK 62A-DIN 69893 automatic tool changer ATC: - Tool places: 30 diameter of tools max.: 90 mm workpiece length: 320 mm weight of tools max.: 8 kg changing positions: vertikal electrical supply data: - capacity: 120 A voltage: 400 V operating frequency: 50 Hz total power requirement: 29 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,3 x 6,7 x 3,6 m GEquipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip F41227320 conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in Y- and Z-axis • X-axis drive via gear rack and master/slave drive • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. seller offer No. resale 1118-15921
Машина в наявності:	Так
Seller-item-No.:	1118-15921

Розповісти про цю машину на Facebook:

Фрезерні верстати з рухомою стійкою PARPAS SHARK One

Запит

більше PARPAS SHARK One + similar PARPAS-Модель