| tarif: |
Plazma kesme sistemi ESAB UXL P EV 2000
kullanılmış makine
Plasma cutting system with accessories
The plasma cutting system consists of:
1 piece Plasma cutting machine ESAB UXL P EV 2000 built in 2006
1 piece Power source Hypertherm Powermax 85
1 piece Vision T5 control with touchscreen operation, latest design,
built in 2022
1 piece Dodek suction table, for large-format support cutting area
1500x3000mm, sequentially flap-controlled, built in 2006
1 piece Dodek cyclone suction system with Donaldson suction filter
technology, fan suction capacity without resistance approx. 5400m3/h,
built in 2006
Plasma system : MAX Series
SCOPE OF SUPPLY:
Retrofit of CNC control
Controller VISION™ T5c
RETROFIT (AT SITE) OF EXISTING 1 PCE
RETROFIT (AT SITE) OF EXISTINGMACHINE
Next Generation Cutting Machine Controller
Retrofit & Modernization of the existing
Basic-Machine and the hereafter offered
Equipment will be done at site.
Estimated working time and time schedule
according to agreement and consultation
of Retrofit dept., details see last page
of this document: conditions.
Before implementing an Retrofit, a survey
at site by an qualified ECS technician
is recommended.
Changes of the machine functions and/or
processes which have been implemented
after the first installation of the
machine, which hasn´t been executed by
ESAB CUTTING SYTEMS are not considered
in this offer and may cause a separate
arrangement.
The customer has to provide lifting
facilities and transport equipment as
well as personal for assistance.
Before start of the retrofitting works,
the machine must be cleaned by the customer.
Should during re-installation additional
defects occur, which can not guarantee a
perfect function, then, with agreement of
the customer, the additional spare parts
and time will be especially charged.
If the installation or acceptance test has
to be extended due to customer"s reason,
each day will be charged in addition acc.
to our standard Service charges.
We reserve the right to make technical
modifications and improvements without
notification.
RETRO REPLACING BY VISION T5C 1 PCE
RETRO REPLACING BY VISION T5C(WINDOWS 10)
Retrofit to CNC-controller VISION T5c
Windows 10
Exchange of existing CNC-Controller
FOR MODERNISATION / RETROFITTING of:
VISION PC, 280B, 290, 390, 500, 501, 510, 520
(other´s on request)
Basic controller VISION T5
(for up to 12 Stations)
Features of the Control
- operationing assistant ´OP Wizard´
efforts for new operators significantly
- Process Selector
- Bright, wide, touch-screen
- Monitoring of the arc voltage during plasma
cutting process enables accurate height
adjustment of torch
- Dual-Processor design separates motion
control and process control from the operator
interface.
- Additional toggle switch for raising and
lowering tools
- Advanced Easy Shape Library with
Interactive Graphical Preview features 88
shapes with optimization for lead-in/outs,
small holes, and inner contours
- Import parts from DXF / DWG files
and add optimized lead-in/out, and get the
best possible cut quality right at the control.
- DXF import specification
All existing layers and line types of the DXF
file will be imported. Solely the geometry
elements line, arc and circle are allowed for
cutting. All other geometry elements like
polygon, splines, blocks, measurements
etc. cannot be imported. Inner and outer
contours have to be closed and must not
contain double geometry elements.
Hardware Specs:
- PC Based Controller Running with integrated
18.5" "Wide-Screen" Format Colour LCD
Touch-Screen with 1366 x 768 pixels
resolution
- Two USB 2.0 Ports on front panel
- 8 Position Joystick
- Speed Potentiometer
- Standard toggle switches for lifting or
lowering tool on the machine
- Integrated Ethernet (LAN) Port
- CAN Bus I/O Controller
- Integrated Emergency-stop pushbutton
Standards :
DIN 2310-6, DIN EN 28206 (ISO 8206),
VDE 0100, DIN EN 60204-1, (VDE 0113 Part 1)
A current softwarebackup of the existing
controller is needed in case of order.
The agreed delivery period begins
with the date of receipt.
This features are available only
in connection with our modern
ESAB U41258834 cutting torches,
and may not be applicable for
outdated systems.
VDU-TEXT IN GERMAN 1 PCE
Operator language German
SOFTWARE TRANSFER 1 PCE
Software transfer
Transfer of the existing software options
to the new controller as far as available.
Remark:
Older features or options might be modified
or discontinued, custom software need to be reprogrammed
(provided by the customer)
OPERATING INSTR. IN GERMAN 1 PCE
OPERATING INSTR. IN GERMAN(PAPER COPY AND CD ROM)
Operating manual
printed and on CD-ROM, in German
TECHNICAL DOCUMENTATION 1 PCE
TECHNICAL DOCUMENTATIONIN GERMAN (CD-ROM)
Technical documentation
on CD-ROM in German,
consisting of:
- part lists and assembly drawings in German
- wiring diagrams in German
TECHNICAL WORK TIME PER HOUR 20 PCE
Technical working time per hour
PRODUCTION WORK TIME PER HOUR 10 PCE
Production working time per hour
INSTALLATION EXCLUDED 1 PCE
The costs for installation and start-up are
NOT included.
=
The German Industry Federation conditions
in the version as amended from time to time
also apply to installations in Germany.
Note:
- The necessary building site preparations and
services by the customer must be followed in
accordance with the ESAB guidelines
(machine installation plans).
- An overhead crane / forklift or other necessary
lifting gear including authorized operating
personnel must be supplied free of charge
by the customer if required.
- Track installation:
The welding of the track mounting plates on
the base support (IPB) is generally performed
by the customer.
PACKING LARGE 1420X760X700 1 PCE
PACKING LARGE 1420X760X700ON ONE PALETTE
ESAB standard packing "large"
on one palette, max. 1420 x 760 x 700 mm
Find more here - /
Contact us at -
seller offer No. resale 5489398
|