metal çalışma makineleri / freze makineleri / Yuvarlak masa freze makineleri
Üretici: DMG MORI
model:DMU 75 monoBLOCK
Makine türü: Yuvarlak masa freze makineleri
madde-No: 166203266
miktar: 1
tarih: 09.01.2025
yer:
Almanya
fiyat:
Seller-item-No.:011114
| General | |
| Universal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough with integrated coolant tank 500 l / 132 gallon; Control: CELOS with Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 750 mm |
| Cross | 650 mm |
| Vertical | 560 mm |
| Tool changer | |
| Tool changer plane | vertical |
| Type of gripper | Double gripper |
| Number of tools | 60 |
| Max. tool length | 315 mm |
| Max. tool diameter with occupied adjacent pockets | 80 mm |
| Max. tool dia. with free neighbouring pockets | 160 mm |
| Technical Data | |
| Drive power (100% DC) | 25 kW |
| Drive power (40% DC) | 35 kW |
| Torque (100% DC) | 86 Nm |
| Torque (40% DC) | 130 Nm |
| Speed range | - 20000 rpm |
| Spindle taper | HSK-A 63 |
| Feed rate longitudinal/transverse/vertical | 40000/40000/40000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 40/40/40 m/min |
| Miscellaneous | |
| Clamping System | HSK-A 63 |
| Floor space/Weight | |
| Weight approx. | 12300 Kg |
| NC swivel rotary table | Table surface 800 x 650 (Ø 650) mm |
| Centre bore 50h6 mm | |
| Maximum load (table centre) 600 Kg | |
| Direct measuring system | Direct path measuring system |
| 5. Axes (swivelling range) +/- 120 degree | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| Slot width 14 mm | |
| Cabine | Full protection cabin |
| Spindle taper HSK-A 63 | Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine) |
| 3D quickSET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe) |
| Infrared measuring probe Heidenhain | Infrared measuring probe Type Heidenhain TS 649 SK 40 or optionally chosen spindle taper |
| proTIME | proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state |
| Maintenance Package I4.0 | Maintenance Package I4.0: - measurement of tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics |
| Scraper flight conveyor | Scraper flight conveyor with interval control and coolant unit 500 l / 132 gallon, netting band filter integrated, Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in (no standard coolant unit) |
| Coolant ring jet | Coolant ring jet for vertical headstock, 16 water jets, 7 air jets |
| Spray pistol with pump | Spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance) |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list |
| DMG MORI NETSERVICE | DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics |
| IoT connector | DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) |
| SERVICE AGENT (CELOS) | SERVICE AGENT (CELOS) Overview of all maintenance work on the machine |
| MESSENGER (CELOS) | MESENGER (CELOS) Clear live status of the networked machines |
| Special equipment | TCC Tool Control Center basic HSK-A63 - Detection of soiling at the tool interface - Spindle protection by monitoring the max. forces - Determination of the tool pull-in force TCC Tool Control Center - Extension of the functional scope of the opt |
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 75 monoBLOCK | ||
| DMG MORI | DMU 65 monoBLOCK | ||
| DMG MORI | DMU 85 H monoBLOCK | ||
| DMG MORI | DMU 65 H monoBLOCK | ||
| DMG MORI | DMU 65 H monoBLOCK | ||
| 2019 | DMG MORI | DMU 95 monoBLOCK |
| 2010 | DMG MORI | DMU 40 MONOBLOCK | 115000 EUR | [Nov 2019] |
| 2015 | DMG MORI | DMU 50 | 125000 EUR | [Jan 2019] |
