| inlineMASTER® spindle |
speed range 20 - 15.000 min-1 |
|
Spindle taper HSK-A 63 |
|
Speed range 20 - 15000 rpm |
|
Torque (40% DC) 121 Nm |
|
Torque (100% DC) 84 Nm |
|
Drive power (40% DC) 20,3 kW |
|
Drive power (100% DC) 14,5 kW |
|
Clamping System HSK-A 63 |
| Tool clamping for HSK-A63 |
Tool clamping HSK-A63 according DIN 69893 (incl.
adaptation working spindle and tool magazine) |
| NC swivel rotary table |
Swivel Rotary Table for simultaneous machining
Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to
+110°, rotary axis 360° including direct measuring system for B- and
C-axis and working plane transformation |
| Tool magazine 60 pockets |
Tool magazine 60 places HSK-A63 Vertical chain
with double gripper incl. set up station for tool loading |
| Air blast through spindle centre |
Air blast through spindle centre activated by M
function, maintained air |
| Oil- and emulsion mist separator
mechanical |
Oil and emulsion mist separator mechanical filter
system 1100 m³/h (only available with option cabin roof) |
| Chip removal package with cabin roof |
Swarf removal package chip conveyor Coolant -
air-blast changeover Swarf conveyor, scraper type with cleaned slot
screen Spray gun for swarf removal Bed flushing, cabin roof |
| Internal coolant supply 40bar/600l |
Internal coolant supply D41152871 (ICS) with
paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min
/160 gallon incl. rotary joint in spindle, double cartridge filter
50µm for internal coolant Rotating clear-view window (differently
from standard) |
| Infrared measuring probe PP60
optical |
Infrared touch Probe make Renishaw PP 60 optical
(OMP 60) |
| Laser tool measuring BLUM DIGILOG |
Laser tool measuring Blum DIGILOG fix mounted at
machine column modified construction, note interference contour! Tool
lenght and diameter measuring automatically cleaning through external
airblast Calibration tool with taper |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) CELOS Edge
Hardware Allows the use of DMG MORI online services (2) Machine Data
Connector Integrated and standardized machine data interface
Protocols: OPC-UA, MTConnect, MQTT (3) NETservice Qualified support
through i |