metal çalışma makineleri / freze makineleri / Yuvarlak masa freze makineleri
Üretici: DMG MORI
model:CLX 450 TC
Makine türü: Yuvarlak masa freze makineleri
madde-No: 166203268
miktar: 1
tarih: 09.01.2025
yer:
Almanya
fiyat:
Seller-item-No.:071690
| General | |
| Universal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS | |
| Working area | |
| Swing diameter over guide ways | 500 mm |
| Bar diameter max. | 65 mm |
| Turning diameter | 400 mm |
| Max. Turning Length | 1100 mm |
| Work spindle (left) | |
| Spindle bore | 87 mm |
| Spindle diametre on front bearing | 130 mm |
| Main drive 1 | |
| Drive power (40% DC) | 17 kW |
| Drive power (100% DC) | 14 kW |
| Speed range | - 5000 rpm |
| Torque (100% DC) | 275 Nm |
| Bench speed | 485 rpm |
| Max. torque (40% DC) | 345 Nm |
| Tool magazine | |
| Type of magazine | Chain |
| Number of tools | 30 |
| Max. tool diameter | 78 mm |
| Max. tool-Ø with free adjacent pockets | 125 mm |
| Turning-milling spindle | |
| Spindle taper | HSK-A 63 DIN 69893 |
| Spindle speed | -12000 rpm |
| Drive power (100% DC) | 8,8 kW |
| Drive power (40% DC) | 10,5 kW |
| Torque (100% DC) | 73 Nm |
| Torque (40% DC) | 90 Nm |
| locking moment | 850 Nm |
| Swivelling range | +/- 120 degree |
| Floor space/Weight | |
| Dimensions (L x W x H) | 5,19 x 2,11 x 2,47 m |
| Weight approx. | 11200 Kg |
| Excentric turning and milling operation | Excentric turning and milling operation (only with Siemens control) |
| Technologie cycle alternating speed | Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control) |
| Polygon Turning | Polygon Turning for machining of elliptic and polygonal shapes on end faces Note: Only in combination with option B-A0326 Excentric turning and milling operation |
| Program state control | With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines. |
| Broaching | Technology cycle with dialog-guided programming for the production of any keyways according to DIN6885 or driving grooves according to DIN138 with standard tools. This option contains the technology cycle with the corresponding input mask. |
| Y-Axis Parting | Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and |
| Gear Broaching | Technology cycle for pushing internal and external gear teeth on components with single-tooth or multi-tooth shaping tools. The workpiece, the tool and the process parameters can be specified via an operating mask by the user. Important settings of |
| Multi-thread cycle 2.0 | Multi-thread cycle 2.0 Cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. Targeted overlapping of threads with cross-holes, e.g. redirection systems with bal |
| Easy Tool Monitor 2.0 | Tool breakage monitoring Easy Tool Monitor 2.0 Simplified holistic view of the actual state of the tools in Side screen of CELOS Setting of one monitoring limit for each tool selected from the tool list. Easy teaching function to measure monitoring limit |
| Chuck rinsing device, outside, main spindle | Chuck rinsing device for main spindle, outside |
| Chuck rinsing device, outside, counter spindle | Chuck rinsing device for counter spindle, outside |
| Clamping pressure adjustment, motor-adj. valves MS | Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program |
| Clamping pressure adjustment, motor-adj. valves CS | Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program |
| Coolant supply through the counter spindle | Coolant supply through the counter spindle |
| Tailstock function for counter spindle | Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC |
| Counter spindle ISM 65, A2-8 | Counter spindle as integrated spindle motor, ISM 65, A2-8 - Drive power 14/17 kW (18.7/22.7 hp) (S1-100%d.c. / S3-40%d.c.), - Torque 275/345 Nm (202.8/354.4 lbft) (S1-100%d.c. / S3-40%d.c.), - Speed range 0-5.000 rpm - Partial hollow clampin |
| Hinged type chip conveyor | Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min |
| Reinforced coolant pump, 12bar,23l/min | Reinforced coolant pump 12 bar, 23 l/min (174.04 psi, 6.07 gal) instaed of 6 bar, 20 l/min (87.02 psi, 5.28 gal) |
| Chain magazine for 60 tools | Chain magazine 60fold, instead of chain magazine 30fold |
| Workpiece touch probe RMP40, Renishaw | Workpiece touch probe RMP40, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Notes: - Custom meas |
| Tool measuring device RP1, Renishaw | Tool measuring device RP1, Renishaw Automatic 5-way tool measurement in the machine by means of touch cubes to avoid measuring and transmission errors. Precise measurement of tool length and tool diameter for stationary tools (turning tools). The measure |
| Tool admission Capto C6, instead HSK-63A | Turn/mill spindle and tool magazine with tool reception Capto C6 (Sandvik) |
| Automatic actuation of sliding cover, electrical | Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible) |
| MPC - Machine Protection Control | MPC 1.0 - Machine Protection Control Machine protection by quick shutdown of milling head in less than 0,01 sec - only for TC machines with compactMASTER® - only for machines with CELOS® with Siemens control |
| Electrical interface for Robo2Go | Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as |
| 3-jaw chuck, NCE 210-66, Schunk | 3-jaw power clamping chuck with through-hole and fine serration Type NCE 210-66, Schunk incl. connecting elements - Max. clamping force 100 kN - Max. actuating force 38 kN - Max. speed 5000 rpm - Serration 1/16 x 90° |
| 3-jaw chuck, NCE 210-66, Schunk | 3-jaw power clamping chuck with through-hole and fine serration Type NCE 210-66, Schunk incl. connecting elements - Max. clamping force 100 kN - Max. actuating force 38 kN - Max. speed 5000 rpm - Serration 1/16 x 90° |
| proTIME | proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state |
| Window rinsing of the security window | Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining) |
| NETservice | DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics |
| IoTconnector | DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) |
| Module 35 kg | Module 35 kg - Max. load of the robot 35 kg (77.16 lbs) - Triangular gripper base with outlet lance Note: Indicated is the maximum load of the robot in the tool center point. The maximum workpiece weight is depending on the grippers and the workpiece le |
| Robo2Go | Flexible workpiece loading and unloading system with a six-axis-industrial-robot - Replaceable workpiece storage incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) - Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the tray |
| 3-jaw gripper | 3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) - |
| 3-jaw gripper | 3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) - |
| 2x Additional 2-jaw gripper | 2x Additional 2-jaw gripper for: - Chuck and shaft parts - Inside and outside handle 10kg module: - Diameter 20-80 mm (shaft) (0.78-3.14 in) 20kg and 35kg module: - Diameter 20-170 mm (shaft) (0.78-6.69 in) |
| Robot in white exterior paint | Robot in special paint calcite white (RAL 9010) |
| Pressure adjustment | Pressure adjustment - Manual adjustment of gripping pressure for each gripper(A and B) individually in the range of 2.5 - 6 bar - Mounted on robot arm |
| Workpiece tray for shaft parts | Workpiece tray for shaft parts - Max. load of the tray: 500 kg (1102 lbs) - Workpiece dia.: 20 - 170 mm (0.78-6.69 in), workpiece length: 120 - 950 mm (4.72-37.4 in) - Incl. 5 workpiece support kits (variably pluggable) with 50 mm (1.96 in) division: |
| Pressure piece | Elastic pressure piece for compensation angle errors at sawing sections |
| Attention: Preparation for automation is necessary | Attention: Preparation for automation is necessary For the connection of the Robo2Go the machine needs to be prepared with the electrical interface. |
| Overall declaration of conformity Siemens | Overall declaration of conformity according to Machine directive 2006/42/EC, for the system Robo2Go + machine with Siemens The supplementary technical documentation of the declaration of overall conformity consist of: - An overview drawing of the ma |
| 2020 | DMG MORI | CLX 450 | |
| DMG MORI | CLX 450 | ||
| DMG MORI | CLX 450 | ||
| DMG MORI | CLX 450 | ||
| DMG MORI | CLX 450 | ||
| DMG MORI | CLX 450 | ||
| DMG MORI | CLX 450 | ||
| DMG MORI | CLX 450 TC | ||
| DMG MORI | CLX 450 TC | ||
| 2020 | DMG MORI | CLX 450 V4 | 99000 EUR |
| 2017 | DMG MORI | CLX 350 | 57620 EUR | [Jul 2023] |
| 2017 | DMG MORI | CLX 350 V3 | 75000 EUR | [Aug 2019] |
