| tarif: |
CNC portal freze makinesi CNC-STEP T-Rex N-0615
yeni makine
CNC portal fraese and 3D engraving machine T-Rex 0712:
equipment / product data of cnc-Fraesen Type High-Z/TRex
series:
Drive: 3 busiest brand stepper motors with
4.5 amperes.
Pushing through long and up to 120mm high
materials possible, as no belt drive is in the way at the end of the X
axis!
linear guides on all Y axes from HIWIN / THK !
Multiple ball-bearing ball thread spindles on all
axes, brand make!
Rapid speed max. approx. 17,000 mm/min
working speed max. approx. 12,000 mm/min
Technical
platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm
reverse play
maximum approx. +/- 10microns (0.010 mm)
Point repeatability:
approx. 0.01 mm
clamping area of the groove plate /
T-slot table: 1650 x 880 mm
travel distances:
X=1200mm; Y=700mm; Z= 130 mm
contact
contact
sensors / reference switches / limit switches on all axes
Double secured emergency release
energy chains for clean
cable handling
total mass with motors : LxWxH
approx. 1960 x 1300 x 1420 mm
Fraesmotor holder Euroneck
43mm
Fraesmotor 1.05 kw / 1050 FME-1 5,000-25,000 rpm with
8mm collet chuck (optional 3mm, 6mm, 10mm and zoellige)
incl.
software WIN-PCNC USB (optional WINPC NC Profi) and
CAD/CAM
Software ConstruCAM-3D ( Full version incl. postprocessor for WIN
PCNC)
weight approx. 350 kg
Complete
machine incl. 5 channel control 5 x 3.5 amps, T-slot plate, wear
plate, radio remote control; Software ConstruCAM-3D, WIN PCNC USB and
Kress Fraesmotor 1050 Watt with 8mm collet !
A
briefing at pick-up, unlimited telephone support as well as our live
support or remote maintenance via Teamviewer on lifespan are always
included in the price of the complete unit.
A
briefing with installation of the software on your brought computer as
well as an enactment of the most important basic concepts for
ConstruCAM-3D, WIN PCNC, Corel Draw etc. are also possible and of
course free of charge
.
technical data are
also available. Control, matched to the CNC Fraese TRex:
5-channel stepper motor CNC control with latest SMD
technology
grid voltage 115 - 240 volts / 47 - 63 Hz.
strang current 5 x 3.5 ampere
micro-step control
resolution 1/10-step / 2000 steps/umdr. for maximum smoothness
5 connections for 5 busiest motors / stepper motors
connection at the parallel port with software WIN PCNC Light, Economy
or via USB with WIN PCNC USB or Profi. (Of all can also be used via
MACH3, USBCNC, NC-Easy as well as for LINUX EMC and C41244965 LINUX
CNC and many others.)
Sleep function for power reduction
oscillation motor connection 24 volts can be controlled via PWM
(e.g. tangential meter) or optionally 24 volts constant for holding
brake via the ST connection
Control of 2 end users up to
approx. 1200 watts can be switched via software (from WIN PCNC Light),
230 volts, max. 6.0 A per socket (e.g. compressor, cooling). Both
sockets are secured separately.
0 - 10 volts for connecting a
frequency inverter for RF/high-frequency spindle
12 status
LEDs for operating status and all important functions (power, Toggle,
Move, X, Y, Z, C; Overheating, Emergency Stop, Relay: Spindle/Cooling,
Short Circuit)
Connection of a total of 4 end or reference
switches as well as an emergency switch
Connection motors
and control line via D-Sub 9-pol. (C-axis 15-pin.)
Emergency
stop button
over heating protection
short-circuit-proof; ready for use
the ce-compliant commissioning of our CNC machines requires
the installation of the protective enclosure and the suction
nozzle.
|