Fin de la subasta: 14.01.2025 - 17:00
añadir a lista de favoritos
5.000 € añadir a lista de favoritos
Número de máquina: 206769 El motor tiene un cilindro de alta velocidad defectuoso y no funciona.
Fin de la subasta: 14.01.2025 - 09:30
añadir a lista de favoritos
Vendedor: Proventura Industrie Auktionen GmbH
5 € añadir a lista de favoritos
Posición general del mobiliario de la tienda, de la antigua papelería con punto de venta de lotería, varios estantes Tego, vitrinas, separadores de ambientes, con iluminación, tamaño de la tienda aprox. 50 m², obligación de despejar - ¡Todo debe llevarse consigo!
Fin de la subasta: 14.01.2025 - 10:00
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
30 € añadir a lista de favoritos
Machine no. 57-622, hot air blower, table length approx. 750 mm, scissor roller conveyor1200 x 800 x 1700 mm100 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:00
añadir a lista de favoritos Vendedor: Surplex GmbH
8.438 € añadir a lista de favoritos
ATTENTION! SELLING AVAILABLE FOR ITALY ONLY A deposit of euro 844.00 is required for participation in this auction. The deposit shall be paid by bank transfer to the current account in the name of Surplex Srl. For further information: matteo.tosin@surplex.com Vehicle description: The batteries have been disconnected to limit their exhaustion. Vehicle has covered approx. 20000 km Tyres approx. 70% Keys: Yes, one. Licence plate: FZ597LD Date of registration: 30/12/2019 Mass: approx. 1550 kg Cubic capacity: 1598 cc Power: 85 KW - 115 HP Diesel engine. IMPORTANT NOTE: This is a commission sale handled by Surplex. Following the adjudication, the customer will receive an invoice from Surplex for the auction commission and the cost of dismantling & loading (if any). After the balance of the above, he will receive the invoice for the adjudication price directly fr ...
Fin de la subasta: 14.01.2025 - 10:00
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
450 € añadir a lista de favoritos
Turning diameter over bed approx. 430 mm, over slide approx. 295 mm, centre width approx. 1500 mm, centre width approx. 375 mm, including chuck2650 x 950 x 1345 mm2000 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:01
añadir a lista de favoritos Vendedor: Surplex GmbH
2.023 € añadir a lista de favoritos
Industrial vacuum to safely collect heavy dust such as sand, chips, and large quantities of dust and dirt. Equipped with: high vacuum turbine motor, powered by a 5.5kW unit 100 Liters high capacity detachable tank All the Electronic components by Schneider Specs: electrical 380V - 50 Hz; vacuum 300 mBar 312 cfm; dimension 310 x 1080 x 1470 mm; weight 169 kG; Accessories included: D50 S wand, D70/50 adaptor, 3 meters D50 EVA hose, D50 hose cuff, D50 floor brush, D50 crevice tool, D50 round brush, D50 connector. The item that is delivered is MAY NOT BE the one shown in the pictures, but an equal one610 x 1080 x 1470 mm169 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:01
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
380 € añadir a lista de favoritos
Machine number 35/5, working width 2540 mm, sheet thickness max. 2 mm, total power requirement 2.8 kW3000 x 2000 x 1100 mm1600 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:02
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
223 € añadir a lista de favoritos
Pressure 3000 Kg (100x100 mm), Material: cast iron, Jaw width: 100 mm, Jaw height: 30 mm, Maximum opening: 100 mm The item that is delivered is MAY NOT BE the one shown in the pictures, but an equal one330 x 150 x 160 mm15 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:02
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
280 € añadir a lista de favoritos
max. power 300 A500x800x600 mm140 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:02
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
5.500 € añadir a lista de favoritos
Well-maintained WEEKE Optimat BHC 655 CNC machining center with 2 machining supports milling on the right / drilling on the left and a REIS robot. Attention: The robot is no longer controlled via the WEEKE software and was built in 1999. Machining support right milling - Main spindle 9 KW with C-axis (speed 1250 - 24000 rpm) - 14-fold tool changer - Milling spindle 3 axis Machining support left drilling - Drill head vertical 32 spindles - Drill head horizontal 6 spindles Y-axis - Drill head horizontal 8 spindles X-axis - Groove saw unit can be swiveled in X-Y direction by 90° - Laser pen for vacuum suction positioning - Consoles 8 pieces and length 1300 mm - Vacuum pumps 2 pieces REIS RV130 robot cannot be controlled via the WEEKE control and was deactivated in the software! The robot can be driven by hand. Year of construction 1999, machine no. 2436626 Loadi ...
Fin de la subasta: 14.01.2025 - 10:03
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
3.647 € añadir a lista de favoritos
The laser marking system is equipped with a safety housing, using high quality components, ideal for marking, engraving and cutting metal products. It has a motorised vertical axis that is easy to use. At work, the fully enclosed fibre laser marking machine will lock the fumes and dust generated by machining inside. Capable of working on a wide range of metals: carbon steel, mild steel, stainless steel, aluminium, copper, magnesium, zinc; on rare metals and alloys such as gold, silver, titanium; and on metal surfaces with special treatments such as anodised aluminium, plated surfaces. It can also mark non-metallic surfaces, for example: plastics such as ABS, PVC, HDPE, PP, PC, PE, rubber and resins. Useful for permanently marking logos, barcodes, QR codes, serial numbers. Occupies a small space and is suitable for marking small objects. Laser power 30W, Laser wavelength 1064 nm, Minimum ...
Fin de la subasta: 14.01.2025 - 10:04
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
19 € añadir a lista de favoritos
Roller mounting support for BT-40/HSK63 cones. Equipped with a bidirectional roller engagement, it allows you to tighten the tool holder on the flange and allows convenient assembly and disassembly of tools or accessories on the cone. The design of the ATT0004 guarantees the protection of the cone thanks to the total absence of contact with the support. The base is also equipped with holes useful for anchoring to the workbench. The item that is delivered is MAY NOT BE the one shown in the pictures, but an equal one210 x 120 x 120 mm2 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:04
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
220 € añadir a lista de favoritos
Machine number 197, with sliding carriage2220 x 1475 x 1000 mm450 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:04
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
7.500 € añadir a lista de favoritos
Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: - Motor 18.5 KW - C axis - Flex5 interface - ...
Fin de la subasta: 14.01.2025 - 10:05
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
2.200 € añadir a lista de favoritos
-Joint milling -Automation package for small batch production -Glue specification for workpiece thickness max. 60 mm -Pre-milling 2 motors / swivelling -Horizontal spray nozzles Lubricant -Multiple processing unit with 2 motors (max. 4 profiles) -Multiple profile scraper unit (max. 4 profiles) -Space reserve approx. 600 mm -Surface scraper -Copy buffing unit with 4 buffing motors -Cleaning agent spray nozzles top and bottom -Smoothing unit for smoothing and eliminating white spots (Attention: The IMA edge will be available from approx. mid/end of January 2025, depending on the delivery date of the new machine).-1 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:05
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
1.193 € añadir a lista de favoritos
Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter The item that is delivered is MAY NOT BE the one shown in the pictures, but an equal one750 x 980 x 1010 mm206 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:05
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
280 € añadir a lista de favoritos
Machine number 1791, including boxes with saw bands1975 x 1000 x 1330 mm300 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:06
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
392 € añadir a lista de favoritos
Battery strapping machine for polyester strap with vibration welding. Designed to apply high tensions to the strap, it has a maximum tensioning capacity of 2800 N expressly designed for polyester, PP or PET strapping, strap width from 13mm to 16mm, thickness 0.5 - 1.2 mm. It guarantees excellent performance by combining the solidity of the mechanics with the practicality and precision of digital technology. 3.0Aih12VCD lithium battery. Recharge time 90 minutes, strapping cycles for each recharge from 100 to 220. Weight about 3 kg. The item that is delivered is MAY NOT BE the one shown in the pictures, but an equal one450 x 180 x 300 mm7 kguncheckedloaded on truck
Fin de la subasta: 14.01.2025 - 10:06
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
12.000 € añadir a lista de favoritos
ATTENTION: Location 97944 Boxberg- Windischbuch, Germany Very well maintained HOMAG Optimat BOF 311/60/K CNC processing center. Technical data: Workpiece length all aggregates - single loading max. 6.000 mm and pendulum loading max. 2.375 mm Workpiece length tool diameter with 25 mm - Single occupancy max. 6,175 mm and pendulum occupancy max. 2,550 mm Workpiece width all units - Front max. 1,450 mm and rear max. 1,700 mm Workpiece width tool diameter with 25 mm - Front max. 1,525 mm and rear max. 1,850 mm Workpiece thickness - Max. 300 mm incl. clamping device Clamping table Console with LED display in X and Y direction - Console length 1640 mm Main spindle 15 KW and speed 1.000 - 24.000 rpm - C-axis with interface for FLEX-5 (aggregate not included!) Drilling head MPU horizontal and vertikal S360° - MultiProcessingUnit with C-axis +/- 185° for drilling op ...
Fin de la subasta: 14.01.2025 - 10:06
añadir a lista de favoritosTOP Vendedor: Surplex GmbH
280 € añadir a lista de favoritos
Machine number 22913, including various sandpapers1340 x 1050 x 2140 mm250 kguncheckedloaded on truck
