:SDM-1480Z | SDM-1680Z | SDM-1980Z | SDM-2080Z turning diameter over bed:1480|1680|1980|2080 mm turning diameter over slide rest:1000|1200|1500|1600 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm bed width:1100 mm workpiece weight:12 (15 opt.) t spindle bore:130 mm spindle taper:140 spindle speed (3 steps):2,5-250 U/min metrical thread cutting:1~120 (44 Arten) mm longitudinal feeds:0.1 ~ 12 (56 Arten) mm/U face feeds:0.05 ~ 6 (56 Arten) mm/U rapid traverse longitudinal:3400 mm/min rapid traverse cross:1700 mm/min cross way of carriage:760 mm movement of the upper support:300 mm tool size:45 x 45 mm tailstock quill diameter:260 mm stroke:300 mm tailstock-quill conus:80 metrisc ...

Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mm turning diameter over slide rest:345|480|680|880 mm turning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mm travel of cross-slide cross:370|420|520|620 mm movement of the upper support:200 mm bed width:600 (Monoblock) mm spindle bore:105mm (130 oder 155 opt.) mm spindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/min metric threading:1~240 mm feeds - longitudinal:0.1~24,3 mm/min feeds - cross:0.05~12,5 mm/min rapid traverse longitudinal and cross:4000, 2000 mm/min turning tool - shaft cross cut:3 ...

:SDM-1460 | SDM-1660 | SDM-1860 | SDM-2060 turning diameter over bed:1460 | 1660 | 1860 | 2060 mm turning diameter over slide rest:960 | 1160 | 1360 | 1560 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm bed width:1180 mm workpiece weight:20 t spindle bore:105 mm spindle taper:140 spindle speed:3-200 1/min, 4 stufig metrical thread cutting:1~60 mm longitudinal feeds:0.1~6 mm/U face feeds:0.05~3 mm/U rapid traverse longitudinal:3400 mm/min rapid traverse cross:1700 mm/min cross way of carriage:750 | 850 | 950 | 1050 mm movement of the upper support:280 mm tool size:45 x 45 mm tailstock quill diameter:280 mm stroke:300 mm tailstock-quill conus:100; 1:7 metrisch spindle motor:55  ...

Режущий и обрабатывающий центр Elumatec модели SZB 620 Вместимость: 120 единиц/смена SBZ 610 (модуль резки + обработки для обработки в ПВХ профиалах) SBZ 610 до SBZ 609 (ручная вставка стали) с принтером этикеток SBZ 609 (арматурное завинчивание, ПВХ + обработка стали) Приемная таблица. Область переработки в ПВХ: отверстия для дренажа, вентиляции, важность мест для установки фиксаторов по периметру, � ...

:SDM 1000E | SDM 1250E | SDM 1400E turning diameter over bed:1000|1250|1400 mm turning diameter over slide rest:650|900|1100 mm turning length:2000/3000/4000/5000/6000/8000/10000/12000 mm max. workpiece weight between centers:8000 kg bed width:755 mm spindle nose:A2-15 spindle bore:130 mm spindle speed (3 steps):3,15-315 U/min metrical thread cutting:1~120 (56 Arten) mm cross way of carriage:520|680|720 mm movement of the upper support:300|300|400 mm tool size:45 x 45 mm tailstock quill diameter:180 mm stroke:300 mm tailstock-quill conus:6 MK weight of the machine ca.:bei 3m: 12 t (jeder weitere Meter ca. 800kg) Machine size (LxWxH):bei 3m: 6100x1900x2000 mm tool holder:4-fach follower rest: ...

Легкий барьер с передатчиком и приемником Диапазон 0,3-7,0 м, высота защитного поля 410 мм, разрешение 14 мм, время реакции 10 м, напряжение 24 V,400мА,IP67,-10-50 C  ...

• больше информации

SmartPick debagging robot for sale! Complete debagging system with plaƞorm holding up to 5 pallets (europallets), cleaning chamber, 2 hoppers, controlling unit with soŌware for recipe programming. The system is installed in our factory at Funen – Denmark. Technical specificaƟons: System capacity: Up to 180 bags/h Bag weight: 25 kg Bag dimensions: Max 700x500 mm Ambient temperature: 10°C ‐ 40°C Dew point: ‐10°C Building year: 2016 – the complete system is in very god condiƟon The machinery is in very good working condition and is still under power and in use SYSTEM DESCRIPTION SmartPick” The proposed system provides for the installation of one articulated robots  ...

General SKU305U627 LocationBarneveld MakeStarick Fördertechnik GmbH TypeRFS-200/SoK Mach.No.1821.2694.01.05 Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm Information Year of construction2005 Total height0,5 m CEcheck Floorspace9.0x0,5 m Weight900 kg ATE ...

We offer 12 Shima Seiki flat knitting machines (11 fully functional, 1 for spare parts). Type: SSG 122SV 14G and SSG 122SV 7G. Year of manufacture 2007-2009 (more detailed description - please see the attached table). Possibility of spare parts. Machines can be purchased individually. Furthermore we woud be happy to provide photos and videos demonstrating the functionality of each machine (except for the one designated for spare parts). Additionally, youre welcome to visit us in Pilsen (CZ) to see the machines in action. (When taking all machines - price negotiable.)

-Горячая воздушная печь Тореро Магазин 4 -для 4 листов 60x40cm -Построен в 2012 году -10 кВт -2 этажа Матадор Магазин 6.4 -на этаж один лист 60x40cm -Построен в 2012 году - на этаж 6,7 кВт -База 6.4.600