Number of spindles: 4 St.
Number of tools: 11 St.
Spindle
diameter: 50,40 mm
Spindle length: 285,125 mm
length: 4000
mm
width: 2000 mm
height: 2200 mm
Weinig Univar 10/3
folding machine
---------------------------------
Machine will
be cleaned and chcked before delivery
For milling around
windows, doors and the like with uneven
circumferential profiles.
Machine suitable for wood thickness 68 to 92 mm
Time required
per frame milling, medium size 1.20 x 1.20 m - approx. 2
minutes.
The available tool positions are selected using a
selector switch on the
control
panel
retrieved.
Machine with 3 hydraulically controlled
right precision
Lifting spindles for holding 3 tool sets, 2 x 95
mm spindle stroke per spindle
The spindle stroke takes place in a
U-movement, so that the opening is possible
for short
parts
The milling stop remains as small as possible. Spindle
stroke horizontally fine
Adjustable for both tool positions from
the operator side.
Central lubrication for the spindle
units.
The 1.
Spindle can be selected in right-left
rotation.
This spindle dips the last 100 mm of each frame
end
appropriate synchronization tool into the passing wood.
Through this
This prevents the tool of the subsequent milling
spindle from running in the
opposite direction
working,
causing tearouts. Excavation of the first 7 transport rollers
using
Footswitch. This shortens the lead time. An
additional
The support rail also allows large-format frames to be
milled around.
Continuous, chainless rubber roller feed with
extreme
short roller spacing. Height adjustment of the feed
bar
electrically readable.
Electrical version according
to VDE.
Machine including operating tools, but without
processing tools
tools.
Technical data:
Working
width min. 40 mm
Working height min. 30 mm, max. 100
mm
1. Profiling spindle (synchronous and
counter-rotation)
------------------------------------------------
-- --
Motor strength lifting spindle 11.0 kW
Spindle speed
6000 rpm
Spindle diameter 50 mm
Clamping length 285
mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232
mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic
position under table 10 mm (adjustable up to 20 mm)
Spindle stroke
horizontal 80 mm
with synchronous automatic immersion
2. Profiling
spindle
----------------------
Motor strength lifting spindle
11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50
mm
Clamping length 285 mm
Tool zero flight circle 112 - 140
mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm
for 3 tools
Basic position under table 10 mm (adjustable up to 20
mm)
Spindle stroke horizontal 80 mm
3. Profiling
spindle
----------------------
Motor strength lifting spindle
11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50
mm
Clamping length 285 mm
Tool zero flight circle 112 - 140
mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm
for 3 tools
Basic position under table 10 mm (adjustable up to 20
mm)
Spindle stroke horizontal 80 mm
4. Profile spindle -
fitting unit on the
right
-------------------------------------------------
For
milling the fitting groove in the milling cycle
or for grooving in
the longitudinal G5112123 profile.
Pneumatic horizontal movement
with
Selector switch in the control panel.
Motor 2.2
KW
Speed 6,000 rpm
Spindle diameter 40 mm
Clamping height
125 mm, 2 tools
Tool flight circle min. 140 mm, max. 180
mm
Motor power feed 1.1 kW
Feed speed 6 - 12
m/min.
Feed rollers - D : 95 mm
Feed roller width 50/30
mm
Feed roller spacing 100/120
mm
--------------------------------
Screen control with
150 programs. 1 program
is each 1 individual part and includes 2
end profiles
and 1 longitudinal profile. Pro programs are for end
processing
20 different profiles can be selected
for
Longitudinal machining of 40 different profiles
1 can be
selected (in turning mode 2).
When manufacturing, e.g. a
frame, up to
8 different programs (parts) can be
saved.
The program memory can be organized so that up
to
18 frames or sashes with a maximum of 8 parts each can be
stored.
Manufacturing options:
- Individual parts
-
Double parts
- frame by frame
- in series
-
Milling
Data entry via keyboard with integrated
Operator
guidance and error
diagnosis.
----------------------------------
Length:
4000mm
(Length of frame milling ruler: 4500 mm)
Width:
2000mm
Height: 2200mm
(Technical information according to
the manufacturer, no guarantee!)
The data
for this ad was created with ModulMWS - the software solution of
LogoTech oHG.