Number of spindles: 6 St.
Working width: 230 mm
Working
height: 120 mm
Length of the planing table: 2500 mm
Feed
motor: 4 kW
Feed speed: 5-30 m/min.
Weinig Powermat 400 with
HSK/Powerlock, axial/radial CNC
controlled
-------------------------------------------------------
----------------
Short
summary:
---------------------------------------------------------
--------------
6 spindles with 8,000 rpm
5 x
HSK/Powerlock
Axial and radial CNC adjustment of the spindles via
control
CNC - controlled adjustment and positioning of the
feed
Detailed
description:
-----------------------------------------------------
------------------
Technical specifications:
Working
width: 20-230 mm
Working height: 8-120 mm
Number of
spindles: 6
1. Tool holder -
below
------------------------------------------------
Motor
with brake: 5.5 kW
Spindle diameter: 40mm
Speed: 6,000
rpm
Tool flight circle: 93 - 160 mm
Axial adjustment range: 5
mm
Rebating device
MarathonCoatin for table insert in front of
1st lower tool holder
2. Tool holder - PowerLock -
right
------------------------------------------------
Motor
with brake: 11.0 kW
Common motor with left tool holder
Speed
including high-performance ball bearing: 8,000 rpm
Tool flight
circle 40 mm below table level: 93 - 200 mm
Tool flight circle 55
mm below table level: 93 - 180 mm
Tool cutting circle for straight
cutter heads max. 163 mm
Max. tool diameter behind stop level: 180
mm
Max throat depth: 35 mm
Axial adjustment range: 55
mm
Spindle axially and radially CNC controlled
3. Tool
holder - PowerLock -
left
------------------------------------------------
Motor
with brake: Common motor with the 2nd spindle
Speed including
high-performance ball bearing: 8,000 rpm
Tool flight circle 40 mm
below table level: 93 - 200 mm
Tool flight circle 55 mm below
table level: 93 - 180 mm
Tool cutting circle for straight cutter
heads max. 163 mm
Max throat depth: 35 mm
Axial adjustment
range: 55 mm
Spindle axially and radially CNC
controlled
4. Tool holder - PowerLock -
above
------------------------------------------------
Motor
with brake: 7.5 kW
Speed including high-performance ball bearing:
8,000 rpm
Tool flight circle: 93 - 200 mm
Tool cutting circle
for straight cutter heads max.: 180 mm
Max throat depth: 35
mm
Axial adjustment range: 40 mm
Divided pressure shoe in
front of the upper tool holder, on tool flight circle
adjustable
and pivoting away from the tool, spring-loaded.
Radial
CNC-controlled spindle
5. Tool holder - PowerLock -
above
------------------------------------------------
Motor
with brake: 7.5 kW
Speed including high-performance ball bearing:
8,000 rpm
Tool flight circle: 93 - 200 mm
Tool cutting circle
for straight cutter heads max. : 180 mm
Max throat depth: 35
mm
Axial adjustment range: 40 mm
Divided pressure shoe in
front of the upper tool holder, on tool flight circle
adjustable
and pivoting away from the tool, spring-loaded.
Spindle axially
and radially CNC controlled
6. Tool holder - PowerLock -
below
------------------------------------------------
Motor
with brake: 7.5 kW
Speed including high-performance ball bearing:
8,000 rpm
Tool flight circle: 93 - 200 mm
Max throat depth: 15
mm
Axial adjustment range: 35 mm
Radial CNC-controlled
spindle
feed
system
------------------------------------------------
Freque
ncy-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30
m/min
Feed roller in front of the 1st lower tool pneumatically
controlled up/down.
Durofer toothed rollers (Weinig patent) with
depth limiter and self-cleaning.
Adjustment range of the feed
rollers compared to the left tool holder, axial 35
mm
Reduction of the feed roller distances to 510
mm,
including additional feed rollers after the upper tool
holders
(diameter 140 mm) and shortened roller spacing, roller
width 50 mm
machine
electrics
------------------------------------------------
Ope
rating voltage 400 V (voltage range 380 - 420 volts), 50
Hz.
Electrical design according to DIN VDE 0113, electrical
equipment from
Industrial machinery EN60204, IEC-204-1. Other
electrical regulations are
not considered.
Machine
stands, tables and
stops
------------------------------------------------
Dressin
g table: 2500 mm long (including joint ruler)
Manual Waxilit pump
G5312123 for table resin removal
A driven rubber roller in
the outfeed table - 50 mm wide
A driven, hardened steel roller in
the machine table, spring-loaded - 150 mm
broad
pressure
elements and
guides
------------------------------------------------
A
lateral pressure roller in front of the left tool holder, moving
and
sprung.
Lateral pressure roller on the infeed table,
spring-loaded
machine
operation
------------------------------------------------
Con
trol: memory function
For saving the setting values of
profiles.
Tool holder axes with electronic digital
displays.
Function:
Saving the setting values of the
manufactured profile at the push of a button
under a profile
number.
If the profile number is selected again, the electronic
double displays show
the setting values.
By manually adjusting
the tool holders, the displays in
matched. 99 memory
locations.
Basic equipment for installing the CNC-controlled
adjustment
and positioning
3 x axial CNC-controlled
adjustment and positioning of the tool holders
in conjunction with
the memory function for tool holders 2,3,5
5 x radial
CNC-controlled adjustment and positioning of the tool holders
in
conjunction with the memory function for tool holders
2,3,4,5,6
CNC - controlled adjustment and positioning of the
feed
high/low in connection with the memory
function
Lubrication points for the axial tool holder
adjustment.
Central location of greasing points at the front of
the machine.
safety and
soundproofing
------------------------------------------------
Full security fairing
Electromagnetic locking of the safety
cover
interior light
Machine without machining
tools
(Technical information according to the manufacturer -
without guarantee!)
The data for this ad
was created with ModulMWS - the software solution of LogoTech
oHG.
Германия
Oberkochen
