| Описание: |
Double end tenoner for solid wood panels Wehrmann WEHRMANN Combima
подержанная машина
Double end tenoner for massiv wood panels
Brand: Wehrmann
Type: Combima
Year: 2007
Wehrmann designed: sturdy, high quality and NC controlled
- The IMA Combima machine chassis makes our machine very sturdy
- This machine is modular equipped with the below listed units
- Heesemann as a High-Quality brand supplied us with their sanding
technology
- NC controlled with grinding units
1 motorized width adjustment
max. working width: approx. 2,500 mm
min. working width: approx. 280 mm
low-maintenance precision roller transport chains,
with 80 mm wide and 85 mm long chain plates,
driver cams, distance 1,080 mm,
pneumatic cam control at 3 heights (6, 12, 18 mm)
2 top prints, electromechanically height-adjustable,
each with a double composite V-belt 80 wide, left and right; Motorized
height adjustment via axle
working height approx. 950 mm
electronic frequency controllers to operate the 100/200 Hz processing
motors
machine control Beckhoff
fast Pentium computer
touchscreen TFT7 display
MS Windows XP operating system
integrated programming software IEC61131/3-SPS TwinCat
- convenient user interface
- logbook function for system and PLC messages
- clear machine data table
- individual aggregate management for each tool
- integrated pattern control
center support,
pneumatically foldable, with roller track
chain conveyor extension for approx. 1.000 mm long parts,
with pneumatic workpiece lowering device
retraction device
from above, inclined, rubber-tired, driven rollers, pneumatically
foldable
Equipment on the left and right side of the machine
1 milling unit
controllable, not pivotable, with a motor 6.6 kW, 400 V, 100 Hz, 6,000
rpm,
vertical and horizontal adjustment infinitely variable via electric
axis
1 milling unit
controllable, not pivotable, with a motor 6.6 kW - 400 V, 100 Hz,
6,000 rpm
vertical and horizontal adjustment infinitely variable via electric
axis
Double hogger unit with:
upper and lower hogger motor each 4.4 kW, 100 Hz, 6,000 rpm,
lower chipper unit offset by approx. 200 mm to the machine infeed,
horizontal and vertical adjustment each infinitely variable via
electric axis
1 profile/milling unit
controllable, pivotable, with a motor 4.4 kW, 380 V, 100 Hz, 6,000
rpm, horizontal and vertical adjustment infinitely variable via
electric axis,
swivel adjustment infinitely variable via electric axis
1 profile/milling unit
controllable, pivotable, with a motor 4.4 kW, 380 V, 100 Hz, 6,000
rpm, horizontal and vertical adjustment infinitely variable via
electric axis,
swivel adjustment infinitely variable via electric axis
1 milling unit
controllable, pivotable, with a motor 4.4 kW, 380 V, 100 Hz, 6,000
rpm, horizontal and vertical adjustment infinitely variable via
electric axis,
swivel adjustment infinitely variable via electric axis
Milling unit 08.055
for radius milling from above and below,
with 1 upper and 1 lower motor 660 W, 400 V, 200 Hz, 12,000 rpm
approx. 25 degrees pivotable
pneumatically engageable/disengageable
blow-off nozzle
for cleaning the top of the workpiece
Milling unit 08.055
for radius milling from above and below,
with 1 upper and 1 lower motor 660 W, 400 V, 200 Hz, 12,000 rpm
approx. 25 degrees pivotable
pneumatically engageable/disengageable
Milling unit 08.055
for radius milling from above and below,
with 1 upper and 1 lower motor 660 W, 400 V, 200 Hz, W4914335 12,000
rpm approx. 25 degrees pivotable
pneumatically engageable/disengageable
Edge sanding unit 08.062
for grinding vertical workpiece edges,
overall oscillating, max. workpiece height approx. 80 mm
Profile sanding unit 08.063
below for grinding small profiles,
e.g. radii up to max.: approx. 7 mm,
Motor 0.55 KW, 50 Hz, 1,500 rpm
Profile sanding unit 08.063
mounted on the upper pressure beam
below for grinding small profiles,
e.g. radii up to max.: approx. 7 mm,
Motor 0.55 KW, 50 Hz, 1,500 rpm
Profile sanding unit Heesemann type M4
horizontal and vertical adjustment infinitely variable via electric
axis, swivel adjustment continuously via electric axis about 45
degrees up and down
Motor 1.1/1.8 KW, 50 Hz, 1,500/3,000 rpm
Profile sanding unit Heesemann type M4
horizontal and vertical adjustment infinitely variable via electric
axis, swivel adjustment continuously via electric axis about 45
degrees up and down
Motor 1.1/1.8 KW, 50 Hz, 1,500/3,000 rpm
Profile sanding unit Heesemann type M4
horizontal and vertical adjustment infinitely variable via electr.
Axis, swivel adjustment continuously via electr. Axis about 45 degrees
up and down
Motor 1.1/1.8 KW, 50 Hz, 1,500/3,000 rpm
Suction sluice with blow nozzle
Extension device approx. 700 mm long
Note:
The specifications and descriptions are a copy of the order
confirmation at that time. Data are for information and are not
binding.
seller offer No. resale 0031126
|