A complete baling system is for sale, consisting of a conveyor belt with feed hopper, the baling press with bale chute and wire pulling stations, without wire. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Type HBC 80 AF Year of construction 1994, overhauled by the manufacturer Bollegraaf 2003 Operating hours 51,551 hours, as of December 2024 Number of pressed bales 613,446 pieces, as of December 2024 Main press pressing force 78 tonnes Pre-press pressing force 45 tonnes Dimensions of feed chute 1,500 x 1,100 mm (l x w) Filling volume / pressing cycle 2.9 m³ Theoretical cycle time 22 seconds Throughput capacity under operating conditions 300 - 450 m³/hour Bale dime ...

For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100  ...

Technical data baler: Manufacturer Bollegraaf Typ HBC 140 K Year of construction 2012 Working hours 18.593 hours, stand September 2024 Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 248 kW Full load current 470 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller Telemecanique TSX Micro Operatin ...

Technical data feeding conveyor belt: Manufacturer Bollegraaf Typ HBT 1216/2000 18000 Year of construction 2015 Driving motor 5,5 kW Length feeding conveyor 18,000 mm Grade 0° Effecting width 2,000 mm Height of side wall feeding conv. 500 mm Transport dimensions 18,000 x 3,200 (2,830 mm without motor and gear) x 1,200 mm l x w x h Weight approx. 13 t Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Использованный мобильный камерный фильтр пресс / фильтрование пресса Филокс 800 x 800 Год постройки: 1980 Размер плиты: 800 x 800 мм Полезная длина: 5200 мм Номер камеры: 88 штук Толщина торта: 25 мм Давление фильтра: 15 бар Давление закрытия: мин. 300 бар, макс 320 бар Общая площадь фильтра: около 98 кв.м Объем торта: около 1100 литров Моторное напряжение: 380 В, 50 Гц Тип защиты: IP 44 Материал плиты: PP  ...

Подержанный камерный фильтр пресс Риттерсаус и Блехер РЦБ 800 x 800 Полезная длина: 3500 Номер камеры: 64 Давление фильтра: 16 бар Давление закрытия: мин. 300 бар, макс 320 бар Площадь фильтра на камеру: около 0,97 м2 Общая площадь фильтра: около 62 м2 Объем торта на камеру: около 11,19 л Объем торта: около 716 литров Материал плиты: PP Drain: открытый Сторона операции: справа Фотоэлемент Завод находи ...

Пресс 800 x 800, блокировка силы cca 3000kN, электрическое отоплени� ...

• больше информации

Замена сварочных контроллеров для сварочных машин сопротивления MPS 100mono MPS 100monoR1 MPS 100мульти MPS 100multiR1  ...

• больше информации

LVD MNC 800 Control panel 800 50 481 T 000  ...

• больше информации

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - ...