turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Год постройки 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200мм Диаметр шпинделя 200мм ISO 50+60, 90кВт СИМЕНС 840 Д АТС 90 Таблица 5.200x5.200mm, X ход 3.300mm макс. нагрузка 100 тонн Ротация 360.000 Напольные плиты 6.000 x 10.000mm Гидростатический Много голов Этот станок использовался при окончательной резке и расточке, сверлении больших блоки цилиндров двигателя судна в двигателе STX. Это м� ...

x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 13000 mm y-travel: 2750 mm z-travel: 3000 mm turning speeds: 600 U/min spindle taper ISO: 50 milling head: 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• больше информации

turning diameter over bed: 2000 mm turning diameter over slide rest: 1600 mm turning length: 22.000 mm turning diameter: 2000 mm turning length: 20.500 mm control: SIEMENS SINUMERIK 840 D workpiece weight: 70.000 KG total power requirement: Hauptmotor 110 kW LATHE FOR HEAVY MACHINING __________________ CONVERSION TO CNC__________________ 2006 __________________TOP WIDTH__________________ 22.000 mm __________________MAXIMUM TURNING LENGTH__________________ SUPPORT 1 20,000 mm SUPPORT 2 20,500 mm ___LARGEST TURNING DIAMETER ___ ABOVE SUPPORT 1600 mm ABOVE BED 2000 mm ____________ WORKPIECE WEIGHT____________ Max. 70,000 KG ____________PLANNING DISC____________ DIAMETER 2000 mm SPEED OF  ...

Overhauled WALDRICH-SIEGEN HMC 2500/3000 portal milling machine with stable portal design  for demanding tool and mold making. Highlights Sinumerik 840D Sl Various interchangeable heads (including Nutator milling head with HF spindle) Extremely stable and good mechanical engineering quality Serial number and control unit Serial number: 11,364 Controller: SIEMENS Sinumerik 840D Sl Workspace Panel clamping area: 2,500 x 3,000 mm Table load max.: 30 t (10 t/m & 7.5 t/m²) Passage from panel field to milling spindle face: 0 - 1,500 mm (vertical spindle nose) Axis travel paths and speeds Crossbeam X-axis Travel distance: 3,750 mm Feed range: 0 - 15,000  ...

The machine has a defect. Overhauled WALDRICH-SIEGEN HMC 2500/3000 portal milling machine with stable portal design  for demanding tool and mold making. Highlights Sinumerik 840D Sl Various interchangeable heads (including Nutator milling head with HF spindle) Extremely stable and good mechanical engineering quality Serial number and control Serial number: 11365 Controller: SIEMENS Sinumerik 840D Sl Workspace Panel clamping area: 2,500 x 3,000 mm Table load max.: 30 t (10 t/m & 7.5 t/m²) Passage from panel field to milling spindle face: 0 - 1,500 mm (vertical spindle nose) Axis travel paths and speeds Crossbeam X-axis Travel distance: 3,750 mm  ...

Overhauled WALDRICH-SIEGEN HMC 2500/3000 portal milling machine with stable portal design  for demanding tool and mold making. Highlights Sinumerik 840D Sl Various interchangeable heads (including Nutator milling head with HF spindle) Extremely stable and good mechanical engineering quality Serial number and control Serial number: 11366 Controller: SIEMENS Sinumerik 840D Sl Workspace Panel clamping area: 2,500 x 3,000 mm Table load max.: 30 t (10 t/m & 7.5 t/m²) Passage from panel field to milling spindle face: 0 - 1,500 mm (vertical spindle nose) Axis travel paths and speeds Crossbeam X-axis Travel distance: 3,750 mm Feed range: 0 - 15,000 mm/min ...

горловина: фланец 760 мм : 500x500 мм Ширина головки гвоздя: 230x170 мм Адаптер инструмента: nach DIN Требования к мощности: кВт общая мощность: кВт вес станка ок.: t размеры станка ок.: м

CNC Gantry Milling Machine Wardrich Siegen Type V/H 75 KW Equipped with a dual table that can be used both coupled and individually, providing flexible machining options. The control system was upgraded in 2002 to the modern Siemens Sinumerick 840 D system with S7 - PLC. Convenient operation through the dual control panel. The machine features a head changer with two heads – one vertical and one horizontal. The integrated tool magazine holds approximately 48 tools. The scope of delivery includes about 50 tools and a range of clamping devices. 13000x6000x6000 mm 160000 kg unchecked loaded on truck