| Описание: |
Оконные установки GUBISCH CW 2
подержанная машина
Tenoning spindle: 1 St.
Number of milling agregates: 4
St.
Spindle diameter: 50 mm
1 GUBISCH – CENTROMAT CW
2
---------------------------------------
Manufacturer
description:
---------------------------------------
For
window and door production, with 50 mm spindle diameter
in
longitudinal profiling. With the following processing stations
and options:
- Slotting machine on one side for straight and
angled connections Milling
machine
for longitudinal
profiling
- Rebating operation with synchronous milling unit and
automatic plunge.
Pivoting frame support up to 650 mm
-
Central control
1.0 cross-cut saw automatically plunges from
above
---------------------------------------
Motor power,
including motor brake: 3.0 kW
Spindle speed: 2,800
rpm.
Cutting circle diameter: 350 mm diameter
Spindle
diameter: 30 mm diameter
Clamping flange, 1 driver 6 mm diameter
TK 42, 120 mm diameter
Pneumatic vertical stroke: 100
mm
Pneumatic horizontal stroke: 160 mm
against 2 manually
adjustable 6-way turret stops
Chip extraction hood with extraction
nozzle 100 mm diameter
2.0 slot
unit
---------------------------------------
Motor power,
including motor brake: 9.2 kW
Spindle speed: 3,800 rpm
Flight
circle diameter: 320 mm diameter
Spindle diameter: 50 mm
diameter
Usable spindle length: 320 mm
Pneumatic vertical
stroke fixed: 2 x 100 mm
Suitable for 3 tool sets of 100 mm
each
Zero height: 10 mm
Chip extraction hood with extraction
nozzle: 160 mm diameter
3.0 Slotting
table
---------------------------------------
Table height
above floor 920 mm
Feed for 4 speeds freely adjustable:
- 1.
Milling, slanting window and typing speed can be set in the
table
(approx. 7 m/min.)
- 2. Sawing speed approx. 7 m/min.
(can be set on the device)
- 3. Transfer speed approx. 10 m/min.
(can be set on the device)
- 4. Return speed/without processing
approx. 25 m/min. (can be set on the
device)
- Motor power,
including motor brake 0.37 kW
Workpiece clamping pneumatic
Pendulum pressure shoes
Workpiece clamping pneumatic
1
clamping cylinder with 2 additional pressure shoes
3.1
Counter wood device Counter wood changer with 2-way automatic change
and
then with manual. Rotation of 180 degrees, 2 further counters
possible, which
then
also counter in automatic
mode
3.2 Length
stop
---------------------------------------
- Stop system
with 3 scales for
- a) outside frame
- b) outside sash
upright
- c) outside sash crosswise Adjustment manually
-
Length with attachable extension 3000 mm
- for sloped windows,
pivotable +/- 60 degrees 3.3 Angle transfer -
automatic via
vertically clocked feed roller in the milling feed
4.0
Milling machine For longitudinal profiling and rebating of
windows/doors
with
the following
units:
---------------------------------------
4.1 First
profile milling
unit
----------------------------------------
-
Counter-rotation
- Synchronous rotation with automatic plunge can
be used for rebating
- Motor power including motor brake: 9.2
kW
- Spindle speed: 6000 rpm.
- Cutting circle diameter: 240
mm max.
- Spindles adjustable for zero diameter 140 mm max.
-
of tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter:
50 mm diameter
- Spindle usable length: 320 mm
- Vertical
stroke pneumatically fixed,
- suitable for 4 tool sets of 80 mm
each, 3 x 80 mm
- Horizontal stroke pneumatic: 80 mm
- Chip
extraction with extraction nozzle diameter 140 mm
4.2 Second
profile milling unit
---------------------------------------
-
Counter rotation
- Motor power including motor brake: 9.2 kW
-
Spindle speed: 6000 rpm.
- Cutting circle diameter: 240 mm
max.
- Spindles adjustable for zero diameter 140 mm max.
- of
tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter: 50
mm diameter
- Spindle usable length: 320 mm
- Vertical stroke
pneumatically fixed,
- suitable for 4 tool sets of 80 mm each, 3 x
80 mm
- Horizontal stroke pneumatically: 80 mm
- Chip
extraction with extraction nozzle diameter 140 mm
4.3 Third
profile milling unit
---------------------------------------
-
Counter rotation
- Motor power including motor brake: 9.2 kW
-
Spindle speed: 6000 rpm.
- Cutting circle diameter: 240 mm
max.
- Spindles adjustable for zero diameter 140 mm max.
- of
tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter: 50
mm diameter
- Useful spindle length: 320 mm
- Fixed pneumatic
vertical stroke,
- Suitable for 4 tool sets of 80 mm, 3 x 80
mm
- Pneumatic horizontal stroke: 80 mm
- Chip extraction with
extraction nozzle diameter 140 mm
4.4 Glazing bead saw
unit
---------------------------------------
- Counter
rotation
- Motor power including motor brake: 3.0 kW
- Spindle
speed: 2800 rpm
- Spindle diameter: 30 mm
- Useful spindle
length: 15 mm
- Cutting circle diameter: 200 mm
- Clamping
flange, 1 driver 6 mm diameter, TK 42 mm - 85 mm diameter
-
Pneumatic vertical stroke
- Glazing bead removal including
kickback protection on the unit
- Chip extraction hood with
extraction nozzle diameter 80 mm
- Incl. electrical
control
4.5
Feed
---------------------------------------
- Motor power:
0.75 kW
- Feed speed: 8 m/min.
- Feed roller diameter: 100
mm
- Roller spacing in the area of
the processing units 110
mm
in the area of the feed 200 mm
- Feed rollers individually
adjustable at an angle to the stop
4.6 Vertical right
stops
---------------------------------------
- Height 85
mm
- Stop 1, set for 1 mm chip removal
- Stops 2 + 3
pneumatically timed for zero or 1 mm chip removal
- Spindles
adjustable for zero diameter 112 – 140 mm
5.0 G41212123
Workpiece return
device
---------------------------------------
The finished
workpieces are returned to the
operating personnel via an inclined
roller conveyor
6.0 PLC central
control
---------------------------------------
- Electronic
freely programmable sequence control for - 99 programs
-
additional 50 combination programs
- 1 combination program, max. 8
steps (=workpieces) corresponds to 1 single-wing
window
-
Plain text display via 2-line display
- Single and combined
operation with automatic angle transfer function
- extremely
simple, easy to understand, logically structured handling of
the
Control
7.0 Workpiece
dimensions:
---------------------------------------
- Slotting
unit: length min. 200 mm + tenon
Width min. 42 mm, max. 200
mm
Thickness min. 42 mm, max. 80 mm
- Milling unit:
length min. 220 mm + tenon
Width min. 42 mm, max. 200
mm
Thickness min. 42 mm, max. 80 mm
- Beveling unit:
frame length min. 400 mm
If the special accessory double
parts package is used, length max. 1700
mm, min. 400 mm + tenon
length
8.0 Technical connection
data
---------------------------------------
- Compressed air
connection 3/8: 8 bar
- Compressed air consumption
-
(conditioned air according to Pneurop 6611) 590 NL/min.
-
Extraction air volume: 152 m3/min.
- Operating voltage: 380 V., 50
Hz.
- Total connected load: 44.0 kW
- Extraction air speed: 32
m/sec.
- Electrical equipment in accordance with VDE 0113 /IP
54
- Loading weight approx. 4240 kg
Special
accessories:
---------------------------------------
- Double
parts package for processing 2 parts (e.g. upright
wing)
Length = min. 400 mm (2x50 mm/ max. 2x90 wide) up
to
max. 1,700 mm workpiece length
- Electronic angle
display
A magnetic sensor scans the swivel movement carried out
using a magnetic strip
attached at a defined radius.
The
display, which can be read in 1/10°, is clearly visible on the
controlcabinet. In the 90ø position, which is defined by a pin,
the LED display
is set to O. Every swivel movement (+/- 60°) is
displayed - Laser beam device
to display the cutting
joint
Option: used tools: Leitz IV 68 wood,
wood-
aluminum, Gold IV 78 wood
(technical
information according to the manufacturer -
no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-6899
|