Система нанесения покрытий SOLOAN SPGF P-12

технологические процессы / машины и установки для технологических процессов

UCY Industrial GmbH
[ профиль дилера ]

господи́н Nick Breinfalk
82049 Pullach
Germany

+49 (0)89... телефон

дилер техники член с 2024

список машин (1503)

Отправить запрос

добавить в список избранного

Отправить запрос

Номер позиции: 164553801	Количество: 1	Дата: 08.10.2024
Год выпуска: 2018	Местоположение: Czechia

Цена:
Производитель:	SOLOAN
Модель:	SPGF P-12
Тип техники:	Система нанесения покрытий
Описание:	Система нанесения покрытий SOLOAN SPGF P-12 подержанная машина Complete SOLOAN powder coating system with gas oven, powder cabin and large storage with rail system. used in 1-shift operation with a maximum of 25-30% utilization, in top condition. Soloan hand powder spray booth with suction filter system SPGF P-12 dust emission Compressed air system Catch overspray exhaust side Potential equalization Sound level rupture disk : Less than 1 mg/m³. : Pressure tank and 6 ATEX membrane valves. : In container under filter cartridges. : Using silencers and distribution plates. : The entire facility : Maximum 75 dB(A) When cleaning with compressed air, a pulse surcharge of 10 dB(A) must be added for a short time. : AISI 304 Placed at inlet supports Exhaust channels and accessories for the suction wall Blow-back channel Ø 630 x 1500, perforated Soloan 38/160P gas-fired powder curing oven. Soloan high temperature curing ovens are built from rock wool insulated steel panels with a thickness of 150mm. These panels are assembled using profiles and processed in such a way that a very high insulation value is created. A double sliding door is mounted on the front. A fan burner is mounted on a chrome steel changer, which indirectly heats the oven air. A centrifugal fan distributes the heated air and blows it in through grilles on the underside of the walls. The same fan sucks this air back over the furnace roof. The result is an even air and heat distribution. The devices are placed on top of the furnace roof. An exhaust air duct (puff-off) with a control valve is installed on the pressure side in order to create a low negative pressure in the oven and at the same time to renew the oven contents approximately ten times per hour. The outside of this oven is sendzimir galvanized with gray construction. Switch cabinet A control cabinet with temperature adjustment and timer with horn ensures easy operation capacity capacity engine Temperature range Circulation fan Smoke removal Burner air exhaust duct : 150kW. U41258834 : 6,000 m3/h/ 250 PA. : 3 kW/400 volts. : 220°C : Radial. : Double-walled Ø 250, including roof duct and Trega cap. : Fresh air intake Ø 200, incl. Roof duct and cross cap. : Double-walled Ø 250, including control valve, roof duct and Trega cap The cassette trolley is 5000mm wide and 2000mm long. A maximum of 3 traverses may be inserted into the cassette trolley at the same time. A loaded cassette trolley can carry a maximum load of 900 kg. The cassette trolley hangs on 2 rails under a steel structure, with 4 double steel wheels. At each cassette trolley position, all buffer extension openings are secured against extension. Of course, the cassette cart itself is also secured. The cassette trolley is locked in the continuous conveyor path to the transfer point. Find more here - / Contact us at - seller offer No. resale 5287398
Seller-item-No.:	5287398

Поделитесь этой машиной на Facebook: